HAMBURG INDUSTRIES CO.,LTD EMV Compliant TECHNICAL CHARACTRISTICS 1.General Characteristics Dimensions: 55.50L x 40.00W x 5.80H mm Weight: Approx. 12 g Contact principle: Friction technology Operating position: Shaft up / Down / Horizontal Mounting System: Thru-HoleType Durability: 100,000 cycles min. 2. Mechanical Characteristics: Insulation material: Thermoplastic, UL 94V-0 3.Electrical Characteristics Number of contacts: 8 pins Contact resistance: 50 mΩ typical, 100 mΩ max. Insulation resistance: > 1000 MΩ / 500 VDC Switch type: Sealed Operation: Normally Open Unit: mm; Tolerances: ±0.10mm Mechanical outline dimension 4. Solderability Wave: 260°C, 5 sec. Max Vaporphase: Not Applicable IR reflow: Not Applicable Manual soldering: 360°C, 3 sec. Max. 5. Environmental Characteristics Operating temperature: - 40°C, ~ + 85°C, Operating humidity: 10 % ~ 95 % RH Storage temperature: - 40°C, ~ + 85°C, Storage humidity: 10 % ~ 95 % RH Thermal shock: - 40°C, ~ + 85°C, 5 cycles Damp Heat: 40°C, 90 % RH, 500HR. Salt-mist: 35°C, 5%, NaCl , 48HR. H&V Smart Card Acceptor Model No.: ICA-602 Thru-Hole Revision:1.5 Date: DEC. 01, 2003 Unit: mm; Tolerances: ±0.10mm Reference dimension for PCB layout