HAMBURG INDUSTRIES CO.,LTD 6FL, No.12, Lane 270, Sec.3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan 222 EMV Compliant TECHNICAL CHARACTERISTICS 1.General Characteristics Dimensions: 62.00L x 40.00W x 6.25H mm Weight: Approx. 6.5g Contact principle: Friction technology Operating position: Shaft up / Down / Horizontal Mounting System: Thru-Hole with snap-in lock Durability: 100,000 cycles min. 2. Mechanical Characteristics: Insulation material: Thermoplastic, UL 94V-0 3.Electrical Characteristics Number of contacts: 8 pins Contact resistance: 50 mΩ typical, 100 mΩ max. Insulation resistance: > 1000 MΩ / 500 VDC Switch type: Blade Operation: Normally Open or Close Unit: mm; Tolerances: ±0.10mm Mechanical outline dimension 4. Solderability Wave: 260°C, 5 sec. Vaporphase: Not applicable IR reflow: Not applicable Manual soldering: 360°C, 3 sec. Max. 5. Environmental Characteristics Operating temperature: - 40°C ~ + 85°C Operating humidity: 10 % ~ 95 % RH Storage temperature: - 40°C ~ + 85°C Storage humidity: 10 % ~ 95 % RH Thermal shock: - 40°C ~ + 85°C, 5 cycles Damp Heat: 40°C, 90 % RH, 500HR. Salt-mist: 35°C, 5%, NaCl , 48HR. H&V Smart Card Acceptor Model No.: ICA-609 NO Revision: 1.1 Unit: mm; Tolerances: ±0.10mm Reference dimension for PCB layout Date: DEC. 01, 2003 For further information,please contact: Tel: 886 2 2662 8882 Fax: 886 2 2662 7201~2 E-mail: [email protected] URL: http://www.hamburg.com.tw