LTC2874-LT3669_Ad_Final(P).pdf

End-to-End IO-Link Solutions
High Current Device
4-Port Master
24V
VDD
BUCK
3.3V
VL
LTC2874
LT3669-2
HOT
SWAP
LDO
300mA
150mA
µC
L+
CQ1
CQ1
GND
GND
µC
µC
µC
SENSOR
L+1
Q2
ILLM
L+4
CQ4
PORT4
IO-Link™ defines standardized connectors, cables and protocol to simplify smart sensor/actuator communications.
The LTC®2874 and LT®3669 interfaces guard against inrush currents, sparks, noise, and ESD events commonly found
in harsh industrial environments where IO-Link systems reside. The LTC2874 quad master integrates a Hot Swap™
controller on each port, reducing board space, design complexity and costs while increasing reliability for multiport
masters. The LT3669 integrates line drivers, a 100mA buck regulator (300mA for LT3669-2) and a 150mA LDO to
provide all the power required for the internal electronics in a sensor or actuator.
LTC2874 Features
LT3669 Features
• IO-Link PHY Compatible
(COM1/COM2/COM3)
• IO-Link PHY Compatible
(COM1/COM2/COM3)
• Hot Swap Protected Supply Outputs
• Cable Interface Protected to ±60V
• 8V to 34V Operation
• 7.5V to 40V Operation
• Configurable CQ Drive Capability
• Integrated 100mA/300mA(-2)
Step-Down Switching Regulator and
150mA LDO Linear Regulator
• Automatic Wake-Up Pulse
Generation (WURQ)
• Cable Interface Protected to
±50V (CQ), 50V (L+)
• Configurable L+ Current Limit
with Foldback
• 4-Wire SPI-Compatible Serial Interface
• 2.9V to 5.5V Logic Supply
• ±8kV HBM ESD
• 38-Lead (5mm x 7mm) QFN and
TSSOP Packages
Info & Free Samples
www.linear.com/product/LTC2874
www.linear.com/product/LT3669
1-800-4-LINEAR
8-Port IO-Link Master Reference
Design (DC2228)
• Rugged Line Drivers with Adjustable
Slew Rate and Current Limit
• Adaptive Line Driver Pulsing Scheme
to Switch Heavy Loads Safely
• Drivers Configurable as Push-Pull,
Pull-Up or Pull-Down
• WURQ Pulse Detection
• Adjustable Power-On Reset Timer
, LT, LTC, LTM, Linear Technology and the Linear logo are
registered trademarks and Hot Swap is a trademark of Linear
Technology Corporation. IO-Link is a registered trademark of
PROFIBUS User Organization (PNO). All other trademarks are
the property of their respective owners.