600 V/650 V CoolMOS™ Fast Body Diode Series (CFD/CFD2/CFDA) www.infineon.com Date: 07/2013 CFD2 Technology CoolMOS™ CFD2 is Infineon’s second generation of fast switching superjunction MOSFETs with integrated Fast Body Diode offering improved energy efficiency. It is the best choice for resonant switching topologies in applications like Telecom, Server, Battery Charging, Solar, HID Lamp Ballast and LED Lighting. MOSFET with Integrated Fast Body Diode Why is there a need for a Fast Body Diode? Most resonant circuits are half or full bridge topologies (2 or 4 transistors). As transistors are switched on and off, energy can be left in the transistor. If due to fast transition times this happens continually then a Fast Body Diode is required to make sure all the energy will leave the transistor and avoid failures (CFD/CFD2/CFDA series). What is the difference between the CoolMOS™ CFD & CFD2 series? CoolMOS™ CFD2 series was designed as direct replacement for the well established CFD series of CoolMOS™. Besides higher breakdown-voltage of CFD2 with 650 V, this new high voltage CoolMOS™ series with integrated body diode offers valuable improvements compared to the previous CFD series. The product portfolio provides all benefits of fast switching superjunction MOSFETs and additionally: Increased light load efficiency due to lower gate charge value Less energy gets stored in output capacitance, which is crucial for efficiency in high line or light load conditions Eoss Limited voltage overshoot during hard commutation –– Self limiting di/dt and dv/dt (softer commutation) results in reduced EMI appearance and higher reliability Low Qrr at repetitive commutation on body diode & low Qoss enable lower switching losses Reduced turn-on and turn-off delay times enable higher duty cycles and/or higher switching frequency Improved cost/performance compared to 600 V CFD predecessor Technology availability also in SMD package Furthermore easy implementation as well as outstanding product quality and reliability remain key benefits of the CoolMOS™ CFD2 series. What is the difference between CFD2 & CFDA? CoolMOS™ CFDA is based on the CFD2 technology, so the performance is comparable. CoolMOS™ CFD2 is addressing Consumer and Industrial applications. The CFDA series is even qualified to Automotive standard AEC-Q101, and therefore perfectly suitable for design into Automotive applications. Specification On-state resistance: maximum rating, 25 °C Symbol SPW47N60CFD IPW65R080CFD Benefits RDS(on) 83 mΩ 80 mΩ Lower conduction losses Total gate charge Qg 248 nC 170nC Improved light load efficiency Breakdown voltage VDS 600 V 650 V Reverse recovery charge Qrr 2 µC 1 µC Reduced switching losses Eoss @ 400 V 20 µJ 12 µJ Reduced switching losses trr 210 ns 180 ns Faster recovery Energy stored in the output capacitance Reverse recovery time Higher overvoltage margin provides increased safety range & flexibility of the part to be used in more applications such as SMPS & Solar Feature comparison between CFD2, CFD and closest competition T = 25°C; lf = 20 A; Rg, d = 5.6 Ω; Ugs = 13 V 800 93 25 92 676V 91 569V 600 Lower conduction losses and very fast switching due to low Qrr of CFD2 technology CFD vs. CFD2 efficiency comparison in a 12 V Server SMPS used Topologie ZVS FB @ 100 kHz Limited voltage overshoot by CFD2 during hard commutation of conducted body diode U [V] 400 200 0 100 200 300 400 88 87 Improved Light Load Efficiency IPW65R080CFD 5 0 85 84 800 0 100 200 t [µs] SPW47N60CFD 10 86 Less Voltage Overshoot 0 15 89 Id [A] Efficiency [%] 90 452V Softer Commutation Behavior 20 Comp2 600 V Limited voltage overshoot due to soft commutation behavior of CFD2 contributes to higher reliability Significantly less voltage overshoot of CFD2 compared to competition enables easier design in 300 400 500 Pout [W] IPA65R420CFD 600 700 800 -5 900 0.25 0.3 0.35 0.4 0.45 0.5 Time [µ] Ids_IPW65R080CFD SPA11N60CFD Improved light load efficiency due to lower Qg New standards for servers require an efficiency measurement at 10% of maximum load rather than the previous 25% load. The above improved efficiency at low load enables customers to meet these new requirements Ids_SPW47N60CFD Low Qrr of CFD2 technology enables lower conduction losses Softer commutation behavior reduces EMI as fast switching of current or voltage i.e. di/dt or dv/dt (main causes for EMI) have been decreased. This reduced EMI behavior saves customers’ time and money in designing in the part CFD to CFD2 Cross Reference Table I2PAK TO-220 TO-220 FullPAK TO-247 RDS(on) 600 V CoolMOS™ CFD 660 650 V CoolMOS™ CFD2 600 V CoolMOS™ CFD 650 V CoolMOS™ CFD2 600 V CoolMOS™ CFD 650 V CoolMOS™ CFD2 600 V CoolMOS™ CFD 650 V CoolMOS™ CFD2 IPI65R660CFD SPP07N60CFD 1) IPP65R660CFD SPA07N60CFD IPA65R660CFD SPW07N60CFD IPW65R660CFD 420 SPI11N60CFD 1) IPI65R420CFD SPP11N60CFD IPP65R420CFD SPA11N60CFD IPA65R420CFD SPW11N60CFD IPW65R420CFD 310 SPI15N60CFD 1) IPI65R310CFD SPP15N60CFD IPP65R310CFD SPA15N60CFD IPA65R310CFD SPW15N60CFD IPW65R310CFD 190 SPI20N60CFD 1) IPI65R190CFD SPP20N60CFD IPP65R190CFD SPA20N60CFD IPA65R190CFD SPW20N60CFD IPW65R190CFD 150 IPI65R150CFD SPP24N60CFD 1) IPP65R150CFD IPA65R150CFD SPW24N60CFD IPW65R150CFD 110 IPI65R110CFD IPP65R110CFD IPA65R110CFD SPW35N60CFD IPW65R110CFD SPW47N60CFD IPW65R080CFD 80 41 IPW65R041CFD 1) will be discontinued Order Number: B152-I0139-V1-7600-EU-EC-P All rights reserved. © 2015 Infineon Technologies AG CoolMOS™ Fast Body Diode Selection Guide CoolMOS™ Voltage Range 600 V 650 V 650 V CFD CFD2 CFDA 0,08 Ω – 0,72 Ω 0,041 Ω – 1,4 Ω 0,048 Ω – 0,66 Ω Product Family & RDS(on) Range Market Segments, Applications & SMPS Topologies Server Telecom ZVS Full Bridge/LLC Lighting HID Resonant Full Bridge UPS ZVS Full Bridge Solar LLC/ZVS Full Bridge Automotive Res. Full Bridge (DC/DC Converter, Onboard Charger)/HID Lighting PC Silverbox LLC 90+ LCD-TV LLC Half Bridge High Performance Notebook Adapter LLC Half Bridge Common CoolMOS™ Applications and Topologies Resonant LLC Half-Bridge HID Lighting CFD2 CFD2 CFD2 SiC Diode HV-Driver CFD2 CFD2 CoolMOS™ CFD2 HV-Driver Infineon Controller ICE1HSO1G HDI Lamp Ballast Controller PFC Controller Phase Shift ZVS (ZVS Fullbridge) Solar – Single phase solution, isolated SiC Diode SiC Diode IGBT IGBT SiC Diode CoolMOS™ CoolMOS™ CFD2 SiC Diode CFD2 OptiMOS™ SiC Diode 12 VDC CFD2 CoolMOS™ CoolMOS™ 150..450V DC 85-265 VAC CFD2 CFD2 OptiMOS™ CFD2 CFD2 CFD2 SiC Diode 230V AC Automotive Topology (On-board battery charger with ZVS phase shifted topology) DC/DC Stage N:1 CoolMOS™ CoolMOS™ UBattery CoolMOS™ UAC CoolMOS™ PFC Stage CoolMOS™ Bridge Rectifier CoolMOS™ CFD2 parts other Infineon parts (CoolMOS™, SiC, IGBT, Controller) Available CoolMOS™ Fast Body Diode Portfolio Industrial product portfolio CoolMOS™ CFD 600 V ThinPAK 8x8 RDS(on) [mΩ] TO-251 IPAK TO-251 IPAK SL short leads TO-252 DPAK TO-263 D2Pak TO-262 I2PAK 700 440 330 220 185 115 80 TO-220 TO-220 FullPAK TO-247 SPP07N60CFD SPP11N60CFD 1) SPP15N60CFD SPP20N60CFD SPP24N60CFD 1) SPA07N60CFD SPA11N60CFD SPA15N60CFD SPA20N60CFD SPW07N60CFD SPW11N60CFD SPW15N60CFD SPW20N60CFD SPW24N60CFD SPW35N60CFD SPW47N60CFD IPB65R660CFD IPB65R420CFD IPB65R310CFD IPB65R190CFD IPB65R150CFD IPB65R110CFD IPP65R660CFD IPP65R420CFD IPP65R310CFD IPP65R190CFD IPP65R150CFD IPP65R110CFD IPA65R660CFD IPA65R420CFD IPA65R310CFD IPA65R190CFD IPA65R150CFD IPA65R110CFD IPW65R660CFD IPW65R420CFD IPW65R310CFD IPW65R190CFD IPW65R150CFD IPW65R110CFD IPW65R080CFD IPW65R041CFD IPB65R660CFDA IPP65R660CFDA IPB65R310CFDA IPB65R190CFDA IPB65R150CFDA IPB65R110CFDA IPP65R310CFDA IPP65R190CFDA IPP65R150CFDA IPP65R110CFDA SPI11N60CFD 1) SPI15N60CFD 1) SPI20N60CFD 1) 1) will be discontinued CoolMOS™ CFD2 650 V 1400 950 660/725 420/460 310/340 190/210 150/165 110 80 41 IPD65R1K4CFD IPD65R950CFD IPD65R660CFD IPD65R420CFD IPL65R725CFD IPL65R460CFD IPL65R340CFD IPL65R210CFD IPL65R165CFD IPI65R660CFD IPI65R420CFD IPI65R310CFD IPI65R190CFD IPI65R150CFD IPI65R110CFD Automotive product portfolio CoolMOS™ CFDA 650 V 660 420 310 190 150 110 80 48 IPD65R660CFDA IPD65R420CFDA Power MOSFETs (naming system till 2005) S Company S = Formerly Siemens Device P = Power MOSFET Package Type A = TO-220 FullPAK B = TO-263 (D2PAK) D = TO-252 (DPAK) I = TO-262 (I2PAK) P = TO-220 U = TO-252 (IPAK) W = TO-247 P W 47 N 60 IPW65R190CFDA IPW65R150CFDA IPW65R110CFDA IPW65R080CFDA IPW65R048CFDA Power MOSFETs (naming system from 2005 onwards) C F I D Specification CFD = CoolMOS™ CFD In this case CoolMOS™ CFD as indication for CoolMOS™ with Fast Body Diode Breakdown Voltage Divided by 10 (60 x 10 = 600V) Technology N = N-Channel Transistors Continuous Drain Current (@ TC = 25°C) [A] Company I = Infineon Device P = Power MOSFET Package Type A = TO-220 FullPAK B = TO-263 (D2PAK) D = TO-252 (DPAK) I = TO-262 (I2PAK) L = ThinPAK 8x8 P = TO-220 U = TO-252 (IPAK) W = TO-247 P W 65 R 041 C F D A Qualified to Automotive standard AEC-Q101 Specification CFD = CoolMOS™ CFD In this case CoolMOS™ CFD as indication for CoolMOS™ with Fast Body Diode RDS(on) [mΩ] R = RDS(on) Breakdown Voltage Divided by 10 (60 x 10 = 600V) CFD2 and CFDA are recommended for new designs. For further information please go on www.infineon.com/CFD2 www.infineon.com/CFDA