Product Brief CoolMOS™ in TO-247 4pin package

Product Brief
CoolMOS™ in TO-247 4pin package
A New Innovative Package Using Kelvin Source Concept
Infineon Technologies introduces the new TO247 4pin package in conjunction with the
latest CoolMOS™ technologies of 600 V C7, 650 V C7 and 600 V P6. With new generations of
power switches becoming faster and faster, the effect of the parasitic elements of package and board limit more and more the overall system performance. In many applications the switching losses are significantly increased by the negative feedback caused by
the parasitic inductance in the source lead of the power switch. An effective measure to
overcome this problem is to provide an additional connection to the source (Kelvin connection), that is used as a reference potential for the gate driving voltage, thereby eliminating the effect of voltage drops over the source inductance. The achievable efficiency
improvement, resulting from faster switching transients, can in fact be significant.
The TO-247 4pin concept
TO-247 vs. TO-247 4pin
G
+ VRG –
+
VDRV
–
+
VCGS
–
D
IDRV
+
VLS
–
G
+ VRG –
ID
+
VDRV
–
S
ID
Turning MOSFET back off
Discharging CGS
VDRV
+
VCGS
–
+
VLSS =~ 0
–
D
IDRV
IDRV
+
VLS
–
SS
„„ Increased creepage distance
between high voltage pins
„„ Gate signal optimization
Key Benefits
„„ Reduces parasitic source inductance
effects on the gate circuit enabling
faster switching and increased
efficiency
„„ Using benefits of Kelvin Source
efficiency to increase MOSFET RDS(on)
and reduce BOM cost
„„ Creepage distance meets 5000 m
altitude requirement
„„ Easier to design by customer
S
Applications
No Discharging CGS
„„ Telecom
„„ Server
VLS
„„ Re-turnon of MOSFET triggered by
„„ Clean waveform secured by 4 pin
discharge of CGS
„„ Loss of efficiency
„„ Above simulation caused Eon losses
of 130 µJ
„„ >2x reduction of turn-on losses
www.infineon.com/600V-C7
„„ 4th pin (Kelvin Source)
ID
MOSFET switches „normal“
VDRV
VLS
ID
Key Features
th
„„ Above simulation using TO-247 4pin
reduced losses by half Eon = 63 µJ
„„ Solar
„„ Industrial
Product Brief
CoolMOS™ in TO-247 4pin package
A New Innovative Package Using Kelvin Source Concept
Benefits in efficiency against 3 pin variants (600 V P6) & Benefit in Light Load and cost by reducing RDS(ON) value (600 V C7)
Efficiency difference for 230 VAC (PFC CCM, 2500 W Rg=3Ω)
0.7
0.6
0.6
Efficiency difference [%]
Efficiency difference [%]
CCM PFC Efficiency difference @ 65kHz; 90 VAC; 5 Ω; IDH16G65C5
0.7
0.5
0.4
+ 0.6
0.3
0.2
0.1
0.0
0
200
400
600
Pout [W]
IPW60R070P6
800
1000
1200
0.5
0.4
0.3
0.2
0.1
0.0
0
500
1000
1500
Pout [W]
IPZ60R060C7, 65 kHz, 680 µH
IPZ60R070P6
Performance gain of 0.6% full load efficiency
(TO-247 4pin 600 V P6 vs. TO-247-3 600 V P6).
2000
2500
3000
IPW60R045CP, 65 kHz, 680 µH
Lower full load losses with 4pin part allow for next ‘smaller’
MOSFET (60 mΩ instead of 45 mΩ) enabling a customer to have
BOM cost reduction from the smaller MOSFET RDS(on) with better
low load efficiency.
VCC
Demonstrator Board and Simplified Circuit
2500W PFC at 65 - 100 kHz
PFC controller
„„ Thermal controlled
In
–– Varying power ranges
„„ Pin layout for 3 pin and 4
pin exchangeable
Single channel
EiceDRIVER™
VCC2
CT
Out+
Out–
GND1
GND2
SIC Diode
Rbias
CoolMOS™ C7
RGate
Cbias
Bulk cap
Kelvin Source
LSource
Current Sense
CS
GND
CoolMOS™ TO-247-4pin Portfolio
Series
125 mΩ
99 mΩ
600 V C7
IPZ60R099C7 1)
600 V P6
IPZ60R125P6 2) IPZ60R099P6 2)
650 V C7
1) Released
95 mΩ
65 mΩ
60 mΩ
45 mΩ
41 mΩ
IPZ60R060C73)
40 mΩ
19 mΩ
IPZ60R040C7 1)
IPZ60R070P6 2)
IPZ65R095C7 1)
2) Q3 2015
70 mΩ
17 mΩ
IPZ60R017C7 3)
IPZ60R041P6 2)
IPZ65R065C7 1)
IPZ65R045C7 1)
IPZ65R019C7 1)
3) Q4 2015
Published by
Infineon Technologies Austria AG
9500 Villach, Austria
© 2015 Infineon Technologies AG.
All Rights Reserved.
Visit us:
www.infineon.com
Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY
AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT
BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION
OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF
OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR
PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER
TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY
US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS
ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR
PRODUCTS FOR THE INTENDED APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/
OR THE INFORMATION GIVEN HEREIN AT ANY TIME.
Order Number: B111-I0097-V1-7600-EU-EC-P
Date: 06 / 2015
Additional information
For further information on technologies, our products,
the application of our products, delivery terms and
conditions and/or prices please contact your nearest
Infineon Technologies office (www.infineon.com).
Warnings
Due to technical requirements, our products may contain
dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any life
endangering applications, including but not limited to
medical, nuclear, military, life critical or any other applications where a failure of the product or any consequences of
the use thereof can result in personal injury.