MB91590 series 32bit Microcontorller Datasheet Supplementary Information Note: This sheet shows a change trace of description in datasheet. All the changes between previous and current document edition are described in this sheet. Following "ID" is a number which is owned by every change. A change which is applied to other documents of same family should have a same ID. Summary Error Error Page Original document code: DS705-00010-4v0-J, Previous document code: DS705-00010-3v1-J Rev. 1.0 June 19, 2015 高速モード*3 I2C timing 150 0.9*3 250 Correct Page Correct ID 150 高速モード 0.9 250*3 #40 131 VOL10 | TDO | Vcc5=4.5V,IOH=5mA | ,,,, #75 "L" level output voltage 131 VOL9 | TDO | Vcc5=4.5V,IOH=5mA | ,,,, CAN PLL jitter 135 Fcp=80MHz(4MHz×20 逓倍) CAN PLL ジッタ(ロック時)の備考 135 削除 #84 TEQFP package support 184 (HQFP-208(FPT-208P-M04)外形寸法図(計画中)) 184 (LET208 208PIN ExposedPAD Low Profile Quad Flat Package) #375 Update the power supply current for Icc5 (MAX) in normal operation 133 Icc5:通常動作時 FCP=128MHz, Fcpp=32MHz:-(Min), 80(Typ), 120(Max):mA:*4, *5 Icc5:通常動作時 FCP=80MHz, Fcpp=40MHz:-(Min), 60(Typ), 100(Max):mA:*4, *5 133 Icc5:通常動作時 FCP=128MHz, Fcpp=32MHz:-(Min), 80(Typ), 120(Max):mA:*4 Icc5:通常動作時 FCP=128MHz, Fcpp=32MHz:-(Min), 80(Typ), 155(Max):mA:*5 Icc5:通常動作時 FCP=80MHz, Fcpp=40MHz:-(Min), 60(Typ), 100(Max):mA:*4 Icc5:通常動作時 FCP=80MHz, Fcpp=40MHz:-(Min), 60(Typ), 130(Max):mA:*5 #389 Update the power supply current for Iccs5 (MAX) in sleep mode 133 Iccs5:スリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 25(Typ), 65(Max):mA:*4, *5 133 Iccs5:スリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 25(Typ), 65(Max):mA:*4 Iccs5:スリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 25(Typ), 80(Max):mA:*5 #390 Update the power supply current for ICCBS5 (MAX) in bus sleep mode 133 ICCBS5:バススリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 15(Typ), 55(Max):mA:*4, *5 133 ICCBS5:バススリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 15(Typ), 55(Max):mA:*4 ICCBS5:バススリープ時 FCP=128MHz, Fcpp=32MHz:-(Min), 15(Typ), 70(Max):mA:*5 #391 Update the power supply current for Icc3 (MAX) in GDC normal operation 133 Icc3:GDC通常動作時 FgdC=81MHz, FgdC-IF=108MHz:-(Min), 200(Typ), 400(Max):mA:*5 133 Publication Number MB91590_DS705-00010-4v0-J-SI Icc3:GDC通常動作時 FgdC=81MHz, FgdC-IF=108MHz:-(Min), 100(Typ), 300(Max):mA:*5 #392 Revision 1 Issue Date June 19, 2015 Supplementary Information Summary Annotation for power supply current table Error Page 134 Update the power supply current for Icc5 (MAX) in Flash write/erase 133 Update the power supply current for Icc3 (MAX) in GDC operation stop 133 Error *5: MB91F59A/B(この値を目標に設計しています。現在エンジ ニアリングサンプル評価中です。) Correct Page 134 *5: MB91F59A/B Correct #393 Icc5:FLASH書込み時 FCP=128MHz, Fcpp=32MHz:-(Min), 133 95(Typ), 135(Max):mA:*3, *4, *5 Icc5:FLASH消去時 FCP=128MHz, Fcpp=32MHz:-(Min), 95(Typ), 135(Max):mA:*3, *4, *5 Icc5:FLASH書込み時 FCP=128MHz, Fcpp=32MHz:-(Min), 95(Typ), 135(Max):mA:*3, *4 Icc5:FLASH書込み時 FCP=128MHz, Fcpp=32MHz:-(Min), 95(Typ), 165(Max):mA:*3, *5 Icc5:FLASH消去時 FCP=128MHz, Fcpp=32MHz:-(Min), 95(Typ), 135(Max):mA:*3, *4 Icc5:FLASH消去時 FCP=128MHz, Fcpp=32MHz:-(Min), 95(Typ), 165(Max):mA:*3, *5 Icc3:GDC動作停止時:-(Min), 2(Typ), 100(Max):mA Icc3:GDC動作停止時:-(Min), 2(Typ), 100(Max):mA:*4 Icc3:GDC動作停止時:-(Min), 2(Typ), 155(Max):mA:*5 June 19, 2015, MB91590_DS705-00010-4v0-J-SI1 ID 133 #396 #397 2