Not for New Design - Alternative Series 140 CRH 140 CLH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, reflow solderable • High temperature, 1500 hours at 125 °C • High capacitance values • Charge and discharge proof, no peak current limitation Fig.1 Component outline • Lead (Pb)-free • ATTENTION: for maximum safe soldering conditions refer 140 CLH ° to Fig.4 APPLICATIONS 150 CLZ 153 CLV 153 CRV lead (Pb)-free • SMD technology, for high mounting density • Industrial and professional applications • Automotive, general industrial • Smoothing, filtering, buffering QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8 x 8 x 10 to 10 x 10 x 14 Rated capacitance range, CR 10 µF to 680 µF Tolerance on CR ± 20 % Rated voltage range, UR Category temperature range Endurance test at 125 °C 1000 hours Useful life at 125 °C 1500 hours Useful life at 40 °C; 1.8 x lR applied 150 000 hours Based on sectional specification • Rated voltage (in V) • Black mark or ‘-’ sign indicating the cathode (the anode is identified by bevelled edges) 1000 hours • Code indicating group number (H) PACKAGING IEC 60384-18/CECC 32300 Climatic category IEC 60068 • Rated capacitance (in µF) • Date code, in accordance with IEC 60062 6.3 V to 63 V - 55 °C to + 125 °C Shelf life at 0 V, 125 °C MARKING 55/125/56 • Supplied in blister tape on reel SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (µF) 6.3 10 16 25 35 50 63 10 22 33 47 68 100 150 220 330 470 680 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 10 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - Document Number: 28303 Revision: 18-Oct-10 For technical questions, contact: [email protected] www.vishay.com 1 Not for New Design - Alternative Series 140 CRH 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE Lmax. Wmax. Hmax. ØD Bmax. S L1 max. MASS (g) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 0810 1010 1014 8.5 10.5 10.5 8.5 10.5 10.5 10.5 10.5 14.3 8.0 10.0 10.0 1.0 1.0 1.0 3.1 4.5 4.5 9.9 11.8 11.8 ≈ 1.0 ≈ 1.3 ≈ 1.5 0.4 ± 0.2 L D H WB C S C 0.3 max. Fig.2 Dimensional outline Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W 8 x 8 x 10 0810 16 10 x 10 x 10 1010 16 10 x 10 x 14 1014 16 Note 1. Detailed tape dimensions see section “PACKAGING”. TAPE THICKNESS T2 REEL DIA. PACKAGING QUANTITY PER REEL 11.3 11.3 14.8 380 380 330 500 500 250 24 24 24 MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. b Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print lay-out and/or adjacent components. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. a c a Fig. 3 Recommended solder pad dimensions AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. TPad 280 (°C) 260 For maximum conditions refer to Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. 240 220 200 Table 3 180 160 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE 0810 1010 1014 www.vishay.com 2 140 120 a b c 100 3.5 4.3 4.3 2.5 2.5 2.5 3.0 4.0 4.0 80 0 50 100 150 200 t (s) 250 Fig. 4 Maximum temperature load during infrared reflow soldering measured on the soldering pad For technical questions, contact: [email protected] Document Number: 28303 Revision: 18-Oct-10 Not for New Design - Alternative Series 140 CRH 140 CLH Aluminum Capacitors SMD (Chip), High Temperature ORDERING EXAMPLE ELECTRICAL DATA Electrolytic capacitor 140 CLH series DESCRIPTION SYMBOL Vishay BCcomponents CR rated capacitance at 100 Hz, tolerance ± 20 % IR rated RMS ripple current at 100 kHz, 125 °C IL2 max. leakage current after 2 minutes at UR tan δ max. dissipation factor at 100 Hz Z max. impedance at 100 kHz 100 µF/50 V; ± 20 % Nominal case size: 10 mm x 10 mm x 14 mm; taped on reel Ordering code: MAL214095102E3 Former 12NC: 2222 140 95102 Note Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 4 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 CR (µF) 330 470 680 220 330 470 150 330 100 220 68 100 150 47 68 100 10 22 33 47 68 IR 100 kHz 125 °C (mA) 180 300 430 180 300 430 180 430 180 300 180 255 317 145 205 255 145 145 145 205 255 NOMINAL CASE SIZE LxWxH (mm) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 IL2 2 min (µA) tan δ 21 30 43 22 33 47 24 53 25 55 24 35 53 24 34 50 6.3 14 21 30 43 0.30 0.30 0.30 0.26 0.26 0.26 0.22 0.22 0.18 0.18 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Z 100 kHz + 20 °C (Ω) 0.65 0.17 0.12 0.65 0.17 0.12 0.65 0.12 0.65 0.19 0.65 0.40 0.30 1.00 0.56 0.42 1.00 1.00 1.00 0.56 0.42 ORDERING CODE MAL2140....... 95303E3 95301E3 95302E3 95403E3 95401E3 95402E3 95502E3 95501E3 95602E3 95601E3 95003E3 95001E3 95002E3 95103E3 95101E3 95102E3 95805E3 95803E3 95804E3 95801E3 95802E3 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods IEC 60384-18, subclause 4.14 Us ≤ 1.15 x UR Reverse voltage for short periods IEC 60384-18, subclause 4.16 Urev ≤ 0.5 V after 2 minutes at UR IL2 ≤ 0.01 x CR x UR Current Leakage current Inductance Equivalent series inductance (ESL) typ. 16 nH Resistance Equivalent series resistance (ESR) at 100 Hz Document Number: 28303 Revision: 18-Oct-10 calculated from tan δmax. and CR (see Table 4) For technical questions, contact: [email protected] ESR = tan δ/2 πf CR www.vishay.com 3 Not for New Design - Alternative Series 140 CRH 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents DISSIPATION FACTOR (tan δ) CAPACITANCE (C) 10 1.2 C C0 1 1.1 tan tan δ 2 1 1.0 2 0.9 1 Curve 1: 6.3 V Curve 2: 63 V 0.8 0.1 - 60 - 40 - 20 0 20 40 60 80 100 120 140 - 40 - 20 0 20 40 60 80 100 tan δ0 = typical tan d at 20 °C, 100 Hz Tamb (°C) C0 = capacitance at 20 °C, 100 Hz - 60 140 Tamb (°C) Fig.6 Typical multiplier of dissipation factor (tan δ) as a function of ambient temperature Fig.5 Typical multiplier of capacitance as a function of frequency of ambient temperature EQUIVALENT SERIES RESISTANCE (ESR) 120 IMPEDANCE (Z) 103 10 ESR ESR 0 Z (Ω) Curve 1: 6.3 V Curve 2: 35 V Curve 3: 63 V 3 2 1 102 1 Case code 0810 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 4 3 2 1 10 1 2 3 1 10-1 0.1 10 2 10 10 3 10 4 ESR0 = typical at 20 °C, 100 Hz f (Hz) 10 5 10 10 2 10 3 10 4 10 5 Tamb (20 °C) Tamb (20 °C) Fig.8 Typical multiplier of ESR as a function of frequency Fig.7 Typical multiplier of ESR as a function of frequency 102 f (Hz) 102 Z (Ω ) Z (Ω ) 4 3 10 4 3 10 2 1 2 1 1 1 Case code 1010 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 0.1 Case code 1014 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 0.1 0.01 0.01 102 10 10 3 10 4 f (Hz) 10 5 10 102 Tamb (20 °C) Fig.9 Typical impedance as a function of frequency www.vishay.com 4 10 3 10 4 f (Hz) 10 5 Tamb (20 °C) Fig.10 Typical impedance as a function of frequency For technical questions, contact: [email protected] Document Number: 28303 Revision: 18-Oct-10 Not for New Design - Alternative Series 140 CRH 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE IA 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 lifetime multiplier 0 1. 2.8 1. 5 2.6 0 2. 3. 0 2.4 0 4. 0 6. 2.2 0 8. 12 2.0 20 1.8 30 0 10 0 Useful life at 125 °C and IR applied: 1500 hours (1) 0 (1) 40 IR = rated ripple current at 100 kHz, 125 °C 60 IA = actual ripple current at 100 kHz 20 1.6 1.4 1.2 1.0 0.8 0.5 0.0 40 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig.11 Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V to 25 V UR = 35 V and 50 V UR = 63 V 50 0.60 0.45 0.40 100 0.70 0.60 0.55 300 0.80 0.75 0.70 1000 0.85 0.85 0.85 3000 0.90 0.90 0.90 10 000 0.95 0.95 0.95 30 000 0.97 0.97 0.97 100 000 1.00 1.00 1.00 Document Number: 28303 Revision: 18-Oct-10 For technical questions, contact: [email protected] www.vishay.com 5 Not for New Design - Alternative Series 140 CRH 140 CLH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Mounting PROCEDURE (quick reference) REFERENCE IEC 60384-18, shall be performed prior to tests mentioned below; ΔC/C: ± 5 % subclause 4.3 reflow soldering; tan δ ≤ spec. limit for maximum temperature load Endurance REQUIREMENTS refer to chapter “Mounting” IL2 ≤ spec. limit IEC 60384-18/ Tamb = 125 °C; UR applied; UR = 6.3 V; ΔC/C: ± 25 % CECC 32 300, 1000 hours UR ≥ 10 V; ΔC/C: ± 20 % subclause 4.15 tan δ ≤ 2 x spec. limit IL2 ≤ spec. limit Useful life CECC 30301, Tamb = 125 °C; UR and IR applied; ΔC/C: ± 50 % subclause 1.8.1 1500 hours tan δ ≤ 3 x spec. limit IL2 ≤ spec. limit no short or open circuit total failure percentage: ≤ 1 % Shelf life IEC 60384-18/ Tamb = 125 °C; no voltage applied; for requirements (storage at high CECC 32 300, 1000 hours see ‘Endurance test’ above temperature) subclause 4.17 Reverse voltage IEC 60384-18/ Tamb = 125 °C: ΔC/C: ± 15 % CECC 32 300, 125 hours at U = - 0.5 V, subclause 4.16 followed by 125 hours at UR tan δ ≤ 1.5 x spec. limit after test: UR to be applied for 30 minutes, 24 hours to 48 hours before measurement www.vishay.com 6 For technical questions, contact: [email protected] IL2 ≤ spec. limit Document Number: 28303 Revision: 18-Oct-10 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000