140 RTM www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial, High Temperature Miniature FEATURES • • • • • • Very long useful life: 2500 h to 4000 h at 125 °C High stability, high reliability AEC-Q200 qualified Extended temperature range up to 125 °C High ripple current capability Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue sleeve • Charge and discharge proof • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 140 RTM 125 °C 105 °C 148 RUS longer life lower Z APPLICATIONS 150 RMI • EDP, telecommunication, industrial, automotive and military • Smoothing, filtering, buffering in SMPS • High ambient temperature environments Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 125 °C Useful life at 125 °C Useful life at 40 °C, 1.6 x IR applied Shelf life at 0 V, 125 °C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 31 22 μF to 4700 μF ± 20 % 6.3 V to 63 V - 55 °C to + 125 °C 2000 h 2500 h to 4000 h 300 000 h 500 h IEC 60384-4/EN 130300 55/125/56 MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance value (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Upper category temperature (125 °C) • Negative terminal identification • Series number (140) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 22 47 100 220 330 470 1000 1200 2200 3300 4700 Revision: 15-Nov-12 6.3 10 x 16 10 x 20 - 10 10 x 12 10 x 16 10 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 16 10 x 12 10 x 16 10 x 16 12.5 x 20 16 x 25 16 x 31 18 x 31 UR (V) 25 10 x 16 10 x 20 10 x 20 12.5 x 25 16 x 20 16 x 31 18 x 31 - 35 10 x 12 10 x 16 12.5 x 20 16 x 25 18 x 31 - 50 10 x 12 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 31 - 63 10 x 12 10 x 12 10 x 20 16 x 20 16 x 20 16 x 25 18 x 31 - Document Number: 28322 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 RTM www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L - + F 15 min 4 Ød 5 min Od - + +1 0 F Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) PACKAGING QUANTITIES FORM CA FORM CB FORM TFA 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800 10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800 10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800 12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500 12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500 16 x 20 19a 0.8 16.5 22.0 7.5 ± 0.5 6.0 250 250 250 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250 16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250 18 x 31 1831 0.8 18.5 33.5 7.5 ± 0.5 12.5 100 100 - Note • For detailed tape dimensions please see www.vishay.com/doc?28360 Revision: 15-Nov-12 Document Number: 28322 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 RTM www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL1 tan Z DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % Rated RMS ripple current at 100 kHz, 125 °C Max. leakage current after 1 min at UR Max. dissipation factor at 100 Hz Max. impedance at 100 kHz Electrolytic capacitor 140 series 220 μF/25 V; ± 20 % Nominal case size: Ø 10 mm x 16 mm; form TFA Ordering code: MAL214036221E3 Former 12NC: 2222 140 36221 Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 kHz 125 °C (mA) IL1 1 min (μA) tan 100 Hz Z 100 kHz + 20 °C () Z 100 kHz - 40 °C () 1200 2200 330 470 1000 2200 2200 3300 4700 220 330 470 1000 2200 3300 4700 220 330 470 1000 1000 2200 3300 100 220 470 1000 2200 47 100 220 330 470 470 1000 22 47 100 220 330 470 1000 10 x 16 10 x 20 10 x 12 10 x 16 10 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 10 x 12 10 x 16 10 x 16 12.5 x 20 16 x 25 16 x 31 18 x 31 10 x 16 10 x 20 10 x 20 12.5 x 25 16 x 20 16 x 31 18 x 31 10 x 12 10 x 16 12.5 x 20 16 x 25 18 x 31 10 x 12 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 31 10 x 12 10 x 12 10 x 20 16 x 20 16 x 20 16 x 25 18 x 31 760 850 480 760 850 1400 1400 1900 2200 480 760 760 1200 1900 2200 2200 750 850 850 1400 1400 2200 2200 480 760 1200 1500 2200 300 380 580 870 1100 1100 1700 380 380 650 1100 1100 1500 1800 79 142 36 50 103 223 223 333 473 38 56 78 163 355 531 755 58 86 121 253 253 553 828 38 80 168 353 773 27 53 113 168 238 238 503 17 33 66 142 211 299 633 0.28 0.28 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.12 0.12 0.12 0.12 0.14 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.150 0.120 0.200 0.150 0.120 0.050 0.050 0.034 0.030 0.200 0.150 0.150 0.073 0.034 0.030 0.030 0.150 0.120 0.120 0.050 0.050 0.030 0.030 0.200 0.150 0.073 0.034 0.030 0.300 0.200 0.120 0.120 0.085 0.085 0.045 0.300 0.300 0.160 0.085 0.085 0.055 0.040 1.10 0.85 1.40 1.10 0.85 0.40 0.40 0.25 0.20 1.40 1.10 1.10 0.50 0.25 0.20 0.20 1.10 0.85 0.85 0.40 0.40 0.20 0.20 1.40 1.10 0.50 0.25 0.20 2.00 1.40 0.85 0.85 0.60 0.60 0.30 2.00 2.00 1.10 0.60 0.60 0.40 0.28 Revision: 15-Nov-12 ORDERING CODE MAL2140 ..... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 53122E3 63122E3 33122E3 53222E3 63222E3 33222E3 54331E3 64331E3 34331E3 54471E3 64471E3 34471E3 54102E3 64102E3 34102E3 94225E3 94226E3 94223E3 54222E3 64222E3 34222E3 54332E3 64332E3 34332E3 54472E3 64472E3 34472E3 55221E3 65221E3 35221E3 55331E3 65331E3 35331E3 55471E3 65471E3 35471E3 55102E3 65102E3 35102E3 55222E3 65222E3 35222E3 55332E3 65332E3 35332E3 55472E3 65472E3 56221E3 66221E3 36221E3 56331E3 66331E3 36331E3 56471E3 66471E3 36471E3 96105E3 96106E3 96103E3 56102E3 66102E3 36102E3 56222E3 66222E3 36222E3 56332E3 66332E3 50101E3 60101E3 30101E3 50221E3 60221E3 30221E3 50471E3 60471E3 30471E3 50102E3 60102E3 30102E3 50222E3 60222E3 51479E3 61479E3 31479E3 51101E3 61101E3 31101E3 51221E3 61221E3 31221E3 51331E3 61331E3 31331E3 91475E3 91476E3 91473E3 51471E3 61471E3 31471E3 51102E3 61102E3 31102E3 58229E3 68229E3 38229E3 58479E3 68479E3 38479E3 58101E3 68101E3 38101E3 58221E3 68221E3 38221E3 58331E3 68331E3 38331E3 58471E3 68471E3 38471E3 58102E3 68102E3 - Document Number: 28322 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 RTM www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 x UR Surge voltage Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.01 CR x UR + 3 μA After 5 min at UR IL5 0.002 CR x UR + 3 μA Inductance Case Ø D = 10 mm Typ. 16 nH Case Ø D 12.5 mm Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.2 1.2 C C0 1.0 C C0 1 1.1 1 2 2 0.8 2 1.0 0.6 2 0.9 0.4 Curve 1: UR < 50 V Curve 2: UR ≥ 50 V 1 Curve 1: UR < 50 V Curve 2: UR ≥ 50 V 1 0.2 0.8 - 60 - 40 - 20 0 20 40 60 80 100 120 140 Tamb (°C) C0 = Typical capacitance at 20 °C, 100 Hz 102 10 103 104 105 Tamb (°C) C0 = Typical capacitance at 20 °C, 100 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature f (Hz) Fig. 6 - Typical multiplier of capacitance as a function of frequency EQUIVALENT SERIES RESISTANCE (ESR) ESR ESR0 2.0 ESR ESR0 1.6 1 Curve 1: UR < 50 V Curve 2: UR ≥ 50 V 2 10 Curve 1: UR < 50 V Curve 2: UR ≥ 50 V 2 1 1.2 0.8 2 1 1 0.4 1 2 0 - 60 - 40 - 20 0 20 40 60 80 100 ESR0 = Typical capacitance at 20 °C, 100 Hz Fig. 7 - Typical multiplier of ESR as a function of ambient temperature Revision: 15-Nov-12 120 Tamb (°C) 140 10 102 103 ESR0 = Typical ESR at 20 °C, 100 Hz 104 f (Hz) 105 Tamb (°C) Fig. 8 - Typical multiplier of ESR as a function of frequency Document Number: 28322 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 RTM www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 2 ENDURANCE AND USEFUL LIFE AS A FUNCTION OF CASE SIZE NOMINAL CASE SIZE ØDxL (mm) CASE CODE ENDURANCE TEST AT 125 ºC (h) USEFUL LIFE AT 125 ºC (h) 10 x 12 14 2000 2500 10 x 16 15 2000 3000 10 x 20 16 2000 3000 12.5 x 20 17 2000 3000 12.5 x 25 18 2000 3000 16 x 20 19a 2000 3000 16 x 25 19 2000 4000 16 x 31 20 2000 4000 18 x 31 1831 2000 4000 MBC242 IA 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 Lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 2.4 0 4. 0 6. 2.2 0 8. 12 2.0 20 1.8 60 0 10 Useful life at 125 ºC and IR applied: see Table 3 (1) 0 40 (1) 1.4 1.2 1.0 0.8 0.5 0.0 0 20 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 125 °C 30 1.6 40 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 15-Nov-12 Document Number: 28322 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 140 RTM www.vishay.com Vishay BCcomponents Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 V TO 25 V UR = 35 V UR = 50 V AND 63 V 50 0.60 0.50 0.35 100 0.70 0.65 0.50 300 0.85 0.80 0.65 1000 0.90 0.85 0.80 3000 0.95 0.90 0.90 10 000 1.00 0.95 0.90 100 000 1.00 1.00 1.00 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 125 °C; UR applied; 2000 h C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 125 °C; UR and IR applied; for test duration see Table 3 C/C: ± 30 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % Shelf life IEC 60384-4/ EN 130300 subclause 4.17 Tamb = 125 °C; no voltage applied; 500 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Revision: 15-Nov-12 Document Number: 28322 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000