SCP-5988

SENSITRON
_____
SEMICONDUCTOR
SCP-5988
TECHNICAL DATA
PART NUMBER: SCP-5988, Rev. A
THREE PHASE FULL WAVE BRIDGE RECTIFIER
DESCRIPTION: 1000 VOLT, 100 AMP THREE PHASE BRIDGE RECTIFIER ASSEMBLY.
Features:
•
Low Forward Voltage Drop
•
Low Power Loss, High Efficiency
•
Very High Surge Capacity
•
Very suitable for medium frequency applications (upto 10 kHz)
•
Soft Reverse Recovery at Low and High Temperature
•
Trr guaranteed lower than 2.5 μsec
MAX. RATINGS / ELECTRICAL CHARACTERISTICS
RATING
CONDITIONS
Peak Inverse Voltage (PIV)
Average DC Output Current
All ratings are at TA = 25oC unless otherwise specified.
(Io)
TC = 55 oC
MIN
TYP
MAX
UNIT
-
-
1100
V
-
-
100
A
o
TC = 100 C
70
TC = 125 oC
55
Peak Single Cycle Surge Current
(IFSM)
tp = 8.3 ms Single Half Cycle
Sine Wave
-
-
720
A (pk)
Peak Recurring Surge Current
(IFRM)
Max. Forward Voltage Drop VF1
Max. Forward Voltage Drop VF2
Max. Reverse Current IR1
Max. Reverse Current IR2
Reverse Recovery Time TRR
o
TC = 25 C
-
-
300
A
80A, Pulse, TJ = 25 °C
80A, Pulse, TJ = 125 °C
VR = 1000V, Pulse, TJ = 25 °C
VR = 1000V, Pulse, TJ = 125 °C
IF = 40A; di/dt = 25A / μs,
VR = 100V, TJ = 25 °C
IF = 40A; di/dt = 25A / μs,
VR = 100V, TJ = 25 °C
VR = 30V, TC = 25 °C
fSIG = 1MHz, VSIG = 100mV
-
1.25
1.5
1.6
1.4
1.25
5.0
15
2.1
V
V
μA
mA
μs
-
27
40
A
-
650
800
pF
350
185
W
Reverse Recovery Current IRM
Max. Junction Capacitance CT
Package Characteristics
TC = 55 OC
Max Module Power Loss at Rated Current
PD
-
Thermal Resistance Junction to Case
RθJC
-
-
0.35
Operating & Storage Temperature Range
TOP & TSTG
- 55
-
150
Isolation – Pins to Base Plate
Viso
-
-
1500
V
M
-
165
-
gms
O
TC = 100 C
Module Weight
-
-
0
Note: Die Max Junction temperature is 190 C
©2010 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]
0
C/W
O
C
SENSITRON
SEMICONDUCTOR
_____
SCP-5988
TECHNICAL DATA
Part Number: SCP-5988, Rev. A
MECHANICAL OUTLINE (DIMENSIONS ARE IN INCHES)
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for
the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause
during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any
intellectual property claims or any other problems that may result from applications of information, products or circuits described
in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage
resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission
of Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their
application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct
purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in
accordance with related laws and regulations.
©2010 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681
Phone (631) 586 7600 Fax (631) 242 9798 • www.sensitron.com • [email protected]