SBR1006 SBR1006A SENSITRON ________ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5481, REV. A THREE PHASE FULL WAVE BRIDGE FAST-RECTIFIER ASSEMBLY DESCRIPTION: 1000 V, 100 A THREE PHASE BRIDGE RECTIFIER ASSEMBLY WITH FAST RECTIFIERS. REDUCED EMI - LOW tRR AND IRM. o MAX. RATINGS / ELECTRICAL CHARACTERISTICS RATING All ratings are at TA = 25 C unless otherwise specified. CONDITIONS o Non-Repetitive Peak Inverse Voltage (PIV) TC = 25 C Repetitive Peak Inverse Voltage (PIV) TC = -55 C to 150 C Average DC Output Current TC = 55 C o 0 o MIN TYP MAX UNIT - - 1200 Vdc - - 1000 Vdc - - 190 A o (TC = Case Temp) (Io) TC = 100 C Peak Single Cycle Surge Current (IFSM) tp = 8.3 ms Single Sine o wave TC = 25 C 1500 - - A Single Cycle Energy Rating tp = 8.3 ms Single Sine o wave TC = 25 C - 9300 - As Operating and Storage Temp (Top & Tstg) - -55 - +150 C Junction Temp (TJ) - -55 - +190 C - - 1.20 V o Maximum Forward Voltage (Vf) (300 sec pulse, duty cycle < 2%) TC = 25 C, If = 100A Maximum Instantaneous Reverse Current At 1000V TC = 25 C Reverse Recovery Time IF = 40A, VR = 100V, di/dt 0 = 25A/µs, TC = 25 C 100 o TC = 125 C, If = 100A 2 1.10 - - 50 A 4000 TC = 100 C 0.6 - 2.0 ©2014 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] µs SBR1006 SBR1006A SENSITRON ________ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5481, REV. A Mechanical / Thermal Characteristics: RATING CONDITIONS MIN TYP MAX UNIT Isolation Voltage All Terminals - Base Plate - - 1500 VRMS Mounting Torque - - - 30 In-lb. Weight - - - 155 gms - - 0.40 C/W Per Diode Thermal Resistance (JL) Note: Add a suffix S to the part number for S-100 Screening. MECHANICAL DIMENSIONS: In Inches SBR1006 ©2014 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SBR1006 SBR1006A SENSITRON ________ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5481, REV. A SBR1006A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2014 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]