RS1PB, RS1PD, RS1PG, RS1PJ www.vishay.com Vishay General Semiconductor High Current Density Surface Mount Glass Passivated Fast Switching Rectifier FEATURES • Very low profile - typical height of 1.0 mm ® eSMP Series Available • Ideal for automated placement • Glass passivated pellet chip junction • Fast switching for high efficiency • Low thermal resistance • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-220AA (SMP) • AEC-Q101 qualified available - Automotive ordering code; base P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 100 V, 200 V, 400 V, 600 V IFSM 30 A trr 150 ns, 250 ns IR 1 μA VF 1.3 V TJ max. 150 °C Package DO-220AA (SMP) Diode variation Single die MECHANICAL DATA Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code RS1PB RS1PD RS1PG RS1PJ RB RD RG RJ 100 200 400 600 UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current (fig. 1) IF(AV) 1.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG -55 to +150 °C Operating junction and storage temperature range V ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage TEST CONDITIONS Maximum reverse current at rated VR voltage SYMBOL RS1PB RS1PD VF (1) IF = 1.0 A TA = 25 °C TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr Typical junction capacitance 4.0 V, 1 MHz CJ RS1PJ μA 60 150 250 9 UNIT V 1.0 IR (2) Maximum reverse recovery time RS1PG 1.3 ns pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms Revision: 29-Feb-16 Document Number: 88934 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS1PB, RS1PD, RS1PG, RS1PJ www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance RS1PB RS1PD RS1PG RJA (1) 115 RJL (1) 15 RJC (1) 20 RS1PJ UNIT °C/W Note (1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. R JL is measured at the terminal of cathode band. RJC is measured at the top center of the body ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE RS1PB-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel RS1PB-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel RS1PBHM3/84A (1) 0.024 84A 3000 7" diameter plastic tape and reel RS1PBHM3/85A (1) 0.024 85A 10 000 13" diameter plastic tape and reel RS1PBHM3/H (1) 0.024 H 3000 7" diameter plastic tape and reel 0.024 I 10 000 13" diameter plastic tape and reel RS1PBHM3/I (1) Note (1) Automotive grade RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 1.2 1.0 0.8 0.6 0.4 TL Measured at the Cathode Band Terminal 0.2 90 100 110 120 130 140 150 TJ = 125 °C 1 TJ = 25 °C 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Lead Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Maximum Forward Current Derating Curve Fig. 3 - Typical Instantaneous Forward Characteristics 30 1000 Instantaneous Reverse Current (μA) Peak Forward Current (A) TJ = 150 °C 10 0.01 0.4 0.0 80 Pulse Width = 300 μs 1 % Duty Cycle 25 20 15 10 5 0 1 10 100 Number of Cycles at 50 Hz Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current TJ = 150 °C 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Revision: 29-Feb-16 Document Number: 88934 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS1PB, RS1PD, RS1PG, RS1PJ www.vishay.com Vishay General Semiconductor Transient Thermal Impedance (°C/W) 1000 Junction Capacitance (pF) 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 100 10 1 0.01 1 10 0.1 100 1 10 100 t - Pulse Duration (s) Reverse Voltage (V) Fig. 6 - Typical Transient Thermal Impedance Fig. 5 - Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF. Cathode Band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.158 (4.00) 0.146 (3.70) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.025 0.030 (0.635) (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.050 (1.27) Revision: 29-Feb-16 Document Number: 88934 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000