VarioDrive C 2011

10:12
Seite 55
Information
27.05.2011
67
VARIODRIVE Compact
VarioDrive C, size 150
VarioDrive C
62
ECI motor
VarioDrive C, size 112
BG motor
58
BCI motor
VarioDrive C, size 084
AC motors
56
Specifications
VarioDrive C, technical information
VARIODRIVE
VarioDrive C
55
Representatives
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
27.05.2011
10:12
Seite 56
Our new EC drive motors VarioDrive C
Technical information
The new line-fed EC drive solution VarioDrive C from ebm-papst Mulfingen is an intelligent alternative to IEC standard motors with frequency inverter. Their robust mechanical design with IP 55 type
of protection and insulation class "B" or "F" make for long service life and allow operation in tough
ambient conditions. Their mounting options are the same as with the well-known B14 / B5 flange
variant and make them easy to connect to the customer application.
A common feature of all three different sizes M3G084, M3G112 and M3G150 is their closed and
compact design with integrated electronics. Torques between 1.0 - 18.0 Nm can easily be realised
in the 390 - 2100 W performance range in connection with variable speed control.
There are numerous analogue and digital control inputs available to control the motor. Additionally,
connection is also possible via RS485 interface.
Diverse functions such as under-voltage detection, over-temperature protection, locked-rotor protection and motor current limitation ensure motor safety.
Electronically commutated synchronous machines come with high efficiency. This advantage becomes especially apparent with speed control in partial load operation when comparing them to
asychnonous machines. Here, higher efficiency brings about a considerable savings in energy, thus
conserving resources and protecting the environment. Wear-and-tear of the motor and the unit it
drives is also reduced at partial load, increasing service life and bringing down the maintenance
expenditure of the complete application.
56
27.05.2011
10:12
Seite 57
VARIODRIVE Compact
VARIODRIVE
Information
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
VarioDrive C
Application areas:
The VarioDrive C is particularly suited for applications with square torque curve, such as fan and
pump drives.
If aggressive media, high temperatures or fluids are involved, the motor usually has to be installed
ECI motor
outside the delivery chamber or delivery medium.
Therefore, typical applications include:
– Climate-controlled cabinets
– Air exhaust boxes
– Process technology plants
57
Representatives
Specifications
AC motors
BCI motor
BG motor
– And many more ...
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
27.05.2011
10:12
Seite 58
EC drive motors
VarioDrive C, size 084
Output power
Nm
A
W
W
50/60
3000
1,2
2,2
1~ 200-277
M3G 084-DF18 -81
500 380
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Cable exit: Variable
– Protection class: I
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 70
kgm2x10-6
°C
kg
p. 70
-25..+40
5,3
K1)
1960
Nominal data at maximum load and 230 VAC
subject to alterations
Fradial
Faxial
Faxial
Fradial
150 N
450 N
L1 15 mm
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
View X
17
Detail view Y
21.5
Groove depth
3 mm
15
12
5 P9
Ø14j6
2,8
2400
2,4
2000
2,0
I
1600
1,6
1200
1,2
800
0,8
400
0,4
0
0,2
58
0,4
0,6
0,8
1,0
1,2 1,4
1,6
1,8 [Nm]
30
176.4 ±1
(126.7)
45 ˚
Ø155
X
Y
Ø172 ±1
Ø149.6
2800
49.7
M8
M6
Ø115
Depth of screw
max. 10 mm
Ø85
3
1000 +20
[A]
M
90˚
85±10
[min-1 ]
Depth of screw
max. 12 mm
M6
6,5
Connection line PVC, 5 x AWG18, 5 x crimped core-end sleeves
Connection line PVC, 3 x AWG22, 3 x crimped core-end sleeves
Ø70j6
L1
Seite 59
Information
10:12
EC drive motors
VarioDrive C, size 084
A
W
W
50/60
1500
2,0
1,7
392 314
°C
kg
p. 70
-25..+40
6,8
K1)
3120
ECI motor
1~ 200-277
Nominal data at höchster Belastung und 230 VAC
Fradial
Faxial
Faxial
Fradial
150 N
1300 N
L1 15 mm
BG motor
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
View X
17
Detail view Y
[A]
2000
2,0
90˚
49.7
30
206.4 ±1
(156.7)
45 ˚
Ø155
2,4
1600
1,6
M
1200
X
Ø172 ±1
Ø149.6
Y
M8
M6
Ø70j6
[min-1 ]
Depth of screw
max. 12 mm
M6
6,5
BCI motor
21.5
Groove depth
3 mm
15
12
5 P9
Ø14j6
L1
Specifications
1,2
I
400
0,4
0
0,4
0,8
1,2
1,6
2,0
2,4
[Nm]
Depth of screw
max. 10 mm
Ø85
3
1000 +20
0,8
85±10
Ø115
800
AC motors
subject to alterations
Connection line PVC, 5 x AWG18, 5 x crimped core-end sleeves
Connection line PVC, 3 x AWG22, 3 x crimped core-end sleeves
59
Representatives
M3G 084-GF08 -81
kgm2x10-6
VarioDrive C
Output power
Nm
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Cable exit: Variable
– Protection class: I
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 70
VARIODRIVE
27.05.2011
VARIODRIVE Compact
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
27.05.2011
10:13
Seite 60
EC drive motors
VarioDrive C, size 084
Output power
Nm
A
W
W
50/60
3000
1,6
2,7
1~ 200-277
M3G 084-FA33 -82
621 503
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Connection leads: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 71
kgm2x10-6
°C
kg
p. 71
-25..+40
6,9
L7)
2440
Nominal data at maximum load and 230 VAC
subject to alterations
Fradial
Faxial
Faxial
Fradial
150 N
540 N
L1 15 mm
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
L1
View X
5 N9
Ø14 j6
17
Groove depth
3 mm
12.6
10
[min-1 ]
[A]
Depth of screw
max. 12 mm
M
2800
2,8
2400
2,4
M5
19.2
6.5
Detail
view Y
30
199.5±1
90˚
63
(136.5)
45 ˚
Ø184
X
1600
1,6
1200
1,2
800
0,8
400
0,4
M8
M6
Ø130
0
0,2
60
0,4
0,6
0,8
1,0
1,2 1,4
1,6
1,8 [Nm]
Y
Ø200±1
Ø168
2,0
I
Depth of screw
max. 10 mm
Ø100
M16x1.5(3x)
3,5
Cable diameter min. 4 mm, max. 10 mm
Ø80j6
2000
Seite 61
Information
10:13
EC drive motors
VarioDrive C, size 084
A
W
W
50/60
3000
2,0
1,4
750 630
°C
kg
p. 71
-25..+40
7,7
L6)
3120
ECI motor
3~ 380-480
Nominal data at maximum load and 400 VAC
Fradial
Faxial
Fradial
Faxial
150 N
650 N
L1 15 mm
BG motor
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
5 N9
Ø14 j6
17
Groove depth
3 mm
12.6
10
[A]
3200
1,6
Depth of screw
max. 12 mm
1,8
1,4
2400
1,2
I
2000
0,8
1200
0,6
800
0,4
400
0,2
0
0,8
1,2
1,6
2,0
2,4
2,8
3,2
M5
19.2
(151.5)
45 ˚
Ø184
X
1,0
1600
0,4
63
Y
Ø200±1
Ø168
M
2800
30
214.5±1
90˚
AC motors
[min-1 ]
6.5
Detail
view Y
BCI motor
View X
M8
M6
Ø130
Depth of screw
max. 10 mm
Ø80j6
L1
Ø100
M16x1.5(3x)
3,5
Specifications
subject to alterations
Cable diameter min. 4 mm, max. 10 mm
[Nm]
61
Representatives
M3G 084-GF06 -42
kgm2x10-6
VarioDrive C
Output power
Nm
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Connection leads: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 71
VARIODRIVE
27.05.2011
VARIODRIVE Compact
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
27.05.2011
10:13
Seite 62
EC drive motors
VarioDrive C, size 112
Output power
Nm
A
W
W
50/60
1500
4,0
3,4
1~ 200-277
M3G 112-GA52 -71
740 630
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Connection leads: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 71
kgm2x10-6
°C
kg
p. 71
-25..+40
10,3
L7)
10240
Nominal data at maximum load and 230 VAC
subject to alterations
Fradial
Faxial
Faxial
Fradial
200 N
2000 N
L1 20 mm
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
View X
6 P9
Ø19 j6
26
Groove depth
3,5 mm
15
12
[A]
M
1400
5,6
1200
4,8
1000
4,0
800
3,2
I
600
2,4
400
1,6
200
0,8
0,8
1,6
2,4
3,2
4,0
4,8
[Nm]
M6
21.5
40
224.5±1
90˚
63
(161.5)
45 ˚
Ø184
X
M8
M6
Ø130
0
62
Depth of screw
max. 12 mm
Y
Ø200±1
Ø168
[min-1 ]
7
Detail
view Y
Depth of screw
max. 10 mm
Ø100
M16x1.5(3x)
3,5
Cable diameter min. 4 mm, max. 10 mm
Ø80j6
L1
Seite 63
Information
10:13
EC drive motors
VarioDrive C, size 112
A
W
W
50/60
1000
5,0
2,8
620 520
°C
kg
p. 71
-25..+40
13,0
L7)
12550
ECI motor
1~ 200-277
M3G 112-IA85 -71
kgm2x10-6
VarioDrive C
Output power
Nm
Electr. connection
Input power
rpm
Mass
Current draw
Hz
Perm. amb. temp.
Torque
VAC
– EMC:
Interference emission acc. to EN 61000-6-4
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Leakage current:
< 3,5 mA acc. to EN 61800-5-1
– Connection leads: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standards:
CE; EN 61800-5-1
Rotor moment of
inertia
Speed/rpm
Type
Frequency
Nominal data
Nominal voltage
range
– Material: Motor housing / electronics:
Die-cast aluminium
– Direction of rotation:
Counter-clockwise, seen on shaft
– Type of protection: IP 55
– Insulation class: "B"
– Mounting position: Any
– Mode of operation:
Continuous operation (S1)
– Bearings: Maintenance-free ball bearings
– Technical features:
See electr. connection p. 71
Nominal data at maximum load and 230 VAC
subject to alterations
Fradial
Faxial
Faxial
Fradial
200 N
3200 N
L1 20 mm
BG motor
Permissible shaft load at nominal speed and life
expectancy L10 at 20 000 h
(at TU max. 40°C).
View X
6 P9
Ø19 j6
26
Groove depth
3,5 mm
15
12
M
1000
Depth of screw
max. 12 mm
40
244.5±1
90˚
63
AC motors
[min-1 ]
[A]
M6
21.5
7
Detail
view Y
BCI motor
L1
VARIODRIVE
27.05.2011
VARIODRIVE Compact
Antriebstechnik_2011_05_27_Finale_EN_:Vorlage
(181.5)
45 ˚
4,0
Ø184
800
3,2
600
2,4
200
0,8
0
2,0
3,0
4,0
5,0
Ø130
Depth of screw
max. 10 mm
Ø100
M16x1.5(3x)
3,5
Specifications
1,6
Cable diameter min. 4 mm, max. 10 mm
6,0 [Nm]
63
Representatives
400
1,0
Ø200±1
Ø168
M8
M6
I
Y
Ø80j6
X