10:36 Seite 103 Information 27.05.2011 109 VARIODRIVE Compact BG 43 electronics VarioDrive C 106 ECI motor BG 43 motors BG motor 105 BCI motor BG 43 application area and specific solutions AC motors 104 Specifications BG 43 technical information VARIODRIVE BG motor 103 Representatives Antriebstechnik_2011_05_27_Finale_EN_:Vorlage Antriebstechnik_2011_05_27_Finale_EN_:Vorlage 27.05.2011 10:36 Seite 104 BG 43 motor Technical information The new EC motor of the size 43 series from ebm-papst features outstandingly robust technology, simple control and a long service life. It unites high efficiency with exceptional noise characteristics. The size 43 features high-performance commutation and control electronics that can also be positioned remotely from the motor. Facts and figures: – EC motor for mains supply voltage (AC), but also for low voltage (DC) – 3-core internal rotor motor in three sizes – Efficiency up to 80% – High start-up and operating torque – Precision ball bearings for long service life and low-noise performance – 8-pole rotor with neodymium iron boron (NdFeB) magnet – Sensorless sine commutation – Optionally with PFC (Power Factor Correction) – Die-cast aluminium bearing shields – Type of protection: IP 20 (optionally IP 54) – Protection class I – Clockwise and counter-clockwise operation possible – Wide variety of customer or application-specific versions possible (see next page) 104 27.05.2011 10:36 Seite 105 VarioDrive C VARIODRIVE Compact VARIODRIVE Information Antriebstechnik_2011_05_27_Finale_EN_:Vorlage Application area: The newly developed, high-efficiency size 43 motor with a maximum output power of 300 watts enables a broad spectrum of applications: – Tangential blowers for underfloor convection heating, cold/hot air door curtains and air-conditioning units ECI motor – Pump drives, for example for heating engineering and medical technology – Applications in the drive engineering area, also possible with various gearboxes, for example – And many more ... Customer-specific solution options: The motor can be adapted electrically and mechanically to the specific requirements: BG motor – Drive shaft on one or both sides possible – Clockwise and counter-clockwise operation – Reversible operation – Possible shaft diameters: 8, 12 and 12.7 mm – Various interfaces for speed-controlled operation – External operating electronics adapted optimally to the motor characteristics, can be installed either on 105 Representatives Specifications AC motors BCI motor the motor or remotely (see page 109) Antriebstechnik_2011_05_27_Finale_EN_:Vorlage 27.05.2011 10:36 Seite 106 BG 43 motor BG 4310 – 3-core internal rotor motor. – 8-pole rotor with neodymium iron boron (NdFeB) magnet. – Precision ball bearings for long service life and low-noise performance. – Motor supply and control via external operating electronics (see page 109). – Protection class I. – Optionally with PFC (Power Factor Correction). – Customer-specific versions possible (see page 105). Nominal data* Type BG 4310 Nominal voltage (UBN) V AC 230 Nominal speed (nN) rpm 2 500 Nominal torque (MN) Ncm 30 Nominal current (IBN) A 0,85 Nominal output power (PN) W 78 Starting torque (MN) Ncm 30 Starting current (max.) A 0,85 Direction of rotation (seen on shaft) clockwise (optionally counter-clockwise) Protection class IP 20 (optionally IP 54) Perm. amb. temp. range (TU) °C 0 to +40 Motor mass (m) kg 0,17 *The power range can be limited at the bottom or extended upwards by various factors (including ambient temperatures, installation situation, type of protection and model of the motor). [min-1 ] Cable for connection to external operating electronics [A] 4000 1,2 Ø80 Ø62 Ø58 Ø49 Ø32 71.5 2 Ø3.8 2 3500 0,9 Ø26 2500 I 2000 58.7 Ø8 M 3000 0,6 1500 0,3 30 Ø3.8 92 500 0 5 106 Ø4.82 Ø3.8 .3 1000 10 15 20 25 30 35 [Ncm] Depth of screw of the bore holes max. 6 mm 27.05.2011 10:36 Seite 107 Information Antriebstechnik_2011_05_27_Finale_EN_:Vorlage BG 43 motor BG 4320 VARIODRIVE Compact VARIODRIVE – 3-core internal rotor motor. – 8-pole rotor with neodymium iron boron (NdFeB) magnet. – Precision ball bearings for long service life and low-noise performance. – Motor supply and control via external operating electronics (see page 109). – Protection class I. – Optionally with PFC (Power Factor Correction). – Customer-specific versions possible (see page 105). VarioDrive C Nominal data* Nominal voltage (UBN) V AC 230 Nominal speed (nN) rpm 2 500 Nominal torque (MN) Ncm 60 Nominal current (IBN) A 2,1 Nominal output power (PN) W 157 Starting torque (MN) Ncm 60 Starting current (max.) A 2,1 Direction of rotation (seen on shaft) ECI motor Type BG 4320 clockwise (optionally counter-clockwise) IP 20 (optionally IP 54) Perm. amb. temp. range (TU) °C 0 to +40 Motor mass (m) kg 0,44 BG motor Protection class BCI motor *The power range can be limited at the bottom or extended upwards by various factors (including ambient temperatures, installation situation, type of protection and model of the motor). Cable for connection to external operating electronics [min-1 ] 81.5 3500 2 3000 2 AC motors Ø80 Ø62 Ø58 Ø49 Ø32 [A] 2,4 Ø3.8 M Specifications 1,6 I Ø26 2000 58.7 Ø8 2500 1500 0,8 30 Ø3.8 Ø4.82 Ø3.8 92 500 .3 1000 10 20 30 40 50 60 70 Depth of screw of the bore holes max. 6 mm [Ncm] 107 Representatives 0 Antriebstechnik_2011_05_27_Finale_EN_:Vorlage 27.05.2011 10:36 Seite 108 BG 43 motor BG 4340 – 3-core internal rotor motor. – 8-pole rotor with neodymium iron boron (NdFeB) magnet. – Precision ball bearings for long service life and low-noise performance. – Motor supply and control via external operating electronics (see page 109). – Protection class I. – Optionally with PFC (Power Factor Correction). – Customer-specific versions possible (see page 105). Nominal data* Type BG 4340 Nominal voltage (UBN) V AC 230 Nominal speed (nN) rpm 2 500 Nominal torque (MN) Ncm 120 Nominal current (IBN) A 3,8 Nominal output power (PN) W 314 Starting torque (MN) Ncm 120 Starting current (max.) A 3,8 Direction of rotation (seen on shaft) clockwise (optionally counter-clockwise) Protection class IP 20 (optionally IP 54) Perm. amb. temp. range (TU) °C 0 to +40 Motor mass (m) kg 1,0 *The power range can be limited at the bottom or extended upwards by various factors (including ambient temperatures, installation situation, type of protection and model of the motor). [min-1 ] Cable for connection to external operating electronics [A] 3500 4,2 101.5 2 2 Ø3.8 3,6 M Ø8 3,0 2,4 1500 1,8 1000 1,2 500 0,6 0 20 40 60 80 100 120 [Ncm] 30 Ø3.8 Ø4.82 Ø3.8 92 2000 Ø26 I 58.7 2500 .3 3000 108 Ø80 Ø62 Ø58 Ø49 Ø32 Depth of screw of the bore holes max. 6 mm 27.05.2011 10:37 Seite 109 Information Antriebstechnik_2011_05_27_Finale_EN_:Vorlage BG 43 motor VARIODRIVE Compact VARIODRIVE External operating electronics The external operating electronics for the three-phase size 43 motor are available in various designs and VarioDrive C numerous hardware extension levels. The motor is safeguarded using electronics software. These electronics allow you to control the size 43 motor exactly as desired, whether you need a change of direction of rotation, high-precision closed-loop speed control or a fixed speed profile. Depending on the power range and ambient conditions, the electronics can be ventilated using the motor or externally. Additional details are available on request. Activation options: Installation options: – Analogue signal (0-10 volts) – Directly on the motor – PWM signal (rectangular signal) – Remotely in the customer's application ECI motor Features: 109 Representatives Specifications AC motors BCI motor BG motor – Additional customer-specific solutions