Release of MINAS-BL GP Series Brushless Motors and Amplifiers (Positioning Type).

Page 1/4
7-1-1 Morofuku, Daito City, Osaka
574-0044, Japan Tel +81-72-870-3052
http://panasonic.net/corporate/segments/ap/
Nov 12, 2012
Release of MINAS-BL GP Series Brushless Motors and
Amplifiers (Positioning Type)
We would like to announce that MINAS-BL GP Series Brushless Motors (Positioning Type) will be released,
following MINAS-BL GV Series (Speed Control Type) released in May 2012.
We greatly appreciate your continued support and cooperation with the sales expansion of our products.
 Date of release: December 25, 2012
 Product features
 Positioning function:
The built-in simplified NC function allows for positioning without an
upper-controller sequence. The adoption of our unique CS sensor eliminated
the need of an external encoder, and enables position setting of up to four
points and sine wave drive, which allows for smooth operation even at low
speeds.
 Compact size and high output: Higher space factor of the stator winding achieved by adopting the MINAS
technique
Comparison with a compact AC geared motor of the same output:
Length: Down by about 55%
Weight: About 1/3
 Speed control range:
30 to 4,000 r/min (Speed ratio: 1:133)
Rated motor revolution speed: 3,000 r/min
 Environment resistance of the motors: IP65 (excluding the sections where the shaft passes through and
the connectors at the cable ends)
 Externally-attached regenerative brake resistor: Externally attachable, enhancing the regenerative
braking ability (Not suitable for continuous use)
 Obtained International standards: EC Directives, UL Standards, China Compulsory Certification (CCC:
Motors only), Korean Radio Wave Act (KC mark: Amplifiers only)
 Startup support software: PANATERM for BL reduces man-hours for adjustment work.
Waveform monitoring, parameter setting, and alarm status check, etc. can be
operated and checked on a PC. The startup support software can be
downloaded from our website free of charge.
You need a separately sold PC connection cable to connect your PC to the
amplifier.
Since the PC connection cable's connector is a D-Sub connector, you also need
*1
a commercially available RS232-USB converter if your PC does not have an
RS232 port.
*1: Recommended converter: I-O DATA USB-RSAQ5R or equivalent
 Output range:
50 W, 90 W, 130 W Voltage: 100 V, 200 V
 Model numbers and prices: For model numbers, please see pages 2 through 4.
For prices, please contact our sales representative.
 Order:
Stocked items
 Dimensions and specifications
Please see our website.
Website page for the MINAS-BL GP Series Brushless Motors
URL:
http://industrial.panasonic.com/ww/i_e/25000/br-minas-bl-gv_e/br-minas-bl-gv_e/pdf/gv/minas-bl-gv-gp-leaflet_e.pdf
Page 2/4
7-1-1 Morofuku, Daito City, Osaka
574-0044, Japan Tel +81-72-870-3052
http://panasonic.net/corporate/segments/ap/
■Position Control GP Series
・Pinion shaft motors
Model No.
Size (mm)
MBMU5AZAB
MBMU9A1AB
MBMU1E1AB
MBMU5AZAB
MBMU9A2AB
MBMU1E2AB
□80
□90
□80
□90
Output (W)
100
90
130
50
200
90
130
・Gear heads
Model No.
Size (mm)
Reduction ratio
MB8G5BV
1/5
MB8G10BV
1/10
MB8G15BV
□80
1/15
MB8G20BV
1/20
MB8G30BV
1/30
MB8G50BV
1/50
MB9G5BV
1/5
MB9G10BV
MB9G15BV
1/10
□90
Voltage (V)
50
1/15
MB9G20BV
1/20
MB9G30BV
1/30
MB9G50BV
1/50
Page 3/4
7-1-1 Morofuku, Daito City, Osaka
574-0044, Japan Tel +81-72-870-3052
http://panasonic.net/corporate/segments/ap/
・Amplifiers
Model No.
Output (W)
MBEG5A1BCP
50
MBEG9A1BCP
90
MBEG1E1BCP
130
MBEG5A5BCP
50
MBEG9A5BCP
90
MBEG1E5BCP
130
Voltage (V)
100
200
・Amplifiers supplied with a power connection cable
Model No.
Output (W)
MBEG5A1BCPC
50
MBEG9A1BCPC
90
MBEG1E1BCPC
130
MBEG5A5BCPC
50
MBEG9A5BCPC
90
MBEG1E5BCPC
130
Voltage (V)
100
200
Page 4/4
7-1-1 Morofuku, Daito City, Osaka
574-0044, Japan Tel +81-72-870-3052
http://panasonic.net/corporate/segments/ap/
 Options (Same as options for already-released GV series)
Name
Specifications
Model No.
Power connector kit
For power connector
DV0P2870
Power connection cable
2 m, with 50-cm ground wire
DV0PM20077
1m
DV0PQ1000110
3m
DV0PQ1000130
5m
DV0PQ1000150
10 m
DV0PQ10001A1
For digital setting
DV0P3510
1m
DV0P38310
3m
DV0P38330
5m
DV0P38350
For control signals
DV0PM20070
Motor extension cable
Panel B
Panel B connection cable
I/O connector kit
Control signal cable
*2
PANATERM for BL
2m
*1
DV0PM20076
Setting software
(DV0PM20067)
*3
For PANATERM for BL
DV0P4140
External regenerative
brake resistor
For 100 V, 50 , 10 W
DV0P2890
For 200 V, 200 ,10 W
DV0PM20068
DIN rail mounting unit
―
DV0P3811
For single-phase type
DV0P4170
For three-phase type
DV0PM20042
For single-phase type
DV0P4190
For three-phase type
DV0P1450
Four filters included
DV0P1460
PC connection cable
Noise filter
Surge absorber
Signal noise filters
Reactor
For single-phase type
DV0P227
DV0P228
For three-phase type
DV0P220
*1: An incorrect length (20 cm) was indicated in the Motor News regarding the GV series issued on May 22,
2012. Please use the above correct information.
*2: Please download PANATERM for BL from our website.
*3: Since the PC connection cable's connector is a D-Sub connector, you also need a commercially
available RS232-USB converter* if your PC does not have an RS232 port.
* Recommended converter: I-O DATA USB-RSAQ5R or equivalent
END