PowerPath Controllers, Ideal Diodes PowerPath™ controllers simplify power source selection in portable and high availability electronics employing multiple, disparate inputs such as wall adapters and batteries. Selection is either by highest voltage, as in a diode-OR, or by highest priority. Linear Technology’s PowerPath controllers utilize P-channel MOSFETs as switches and ideal diodes. By dropping significantly less forward voltage than a regular diode, an ideal diode MOSFET conserves power and voltage headroom, critical for low voltage, battery-equipped systems. The lower drop leads to cooler operation, eliminating bulky heat sinks. LTC®4417 Triple Supply Prioritized PowerPath Controller HIGH PRIORITY Connects Highest Priority Valid Supply to Output 256ms Long, 1.5% Precise Overvoltage and Undervoltage Validation <1μA Draw from Supplies Below VOUT –42V Reversed Input Protection Blocks Reverse and Cross Conduction While Minimizing Output Droop n MEDIUM PRIORITY VOUT 2.5V TO 36V LOW PRIORITY n n n Vn n V1 VALID WINDOW V2 V3 UVn OVn SHUTDOWN VALIDn LTC4417 CAS SUPPLY IS VALID CASCADING OUTPUT ENABLE HYSTERESIS GND LTC4415 Dual Monolithic Ideal Diodes with Adjustable 4A Limit IN1 PRIMARY 1.7V to 5.5V IDEAL OUT1 15mV Forward Turn-On Voltage Smooth Oscillation-Free Diode-OR Switchover Load Current Monitor Precision Enable Thresholds for Prioritized Switchover Current/Thermal Limit Warnings, Status Outputs n TO LOAD n n n + GND n CURRENT LIMIT 4 RON = 50mΩ LOAD CURRENT (A) SECONDARY POWER SOURCE EN1 LTC4415 CLIM1 STAT1 CLIM2 WARN1 WARN2 STAT2 EN2 IDEAL OUT2 IN2 LTC4415 3 SCHOTTKY DIODE MBRS410E 2 VOLTAGE SAVED 1 0 L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and PowerPath is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners. 0 100 300 400 200 FORWARD VOLTAGE DROP (mV) 500 LTC4414 3V to 36V Ideal Diode Controller for Large PFETs WALL ADAPTER INPUT Low Loss Replacement for Power Schottky Diode MOSFET Gate Protection Clamp –14V Reversed Input Protection Off Control Input Status Output Drives Auxiliary PFET n TO LOAD BATTERY CELL(S) n n n LTC4414 VIN GND GATE CTL STAT n VCC SENSE STATUS OUTPUT LOW WHEN WALL ADAPTER IS PRESENT LTC2952 Pushbutton and Dual Ideal Diode-OR Controller with System Supervisor 3V TO 25V Dual Input Ideal Diode-OR Control Pushbutton On/Off Control of Downstream DC/DC Converter Adjustable On/Off Debounce Timers Simple Interface for Graceful Microprocessor Shutdown ±8kV HBM ESD on Pushbutton Input n DC/DC n SHDN n 12V BATTERY G1 G2 n EN VMON PB n LTC2952 INT KILL µP WD ONTIMER OFFTIMER Linear Technology PowerPath Controllers Part Number VIN Range (V) Max Current IQ (μA) Function Packages (mm) LTC4411 2.6 to 5.5 2.6A 40 17mV Turn-On, 140mΩ Ideal Diode with 2.6A Limit TSOT23-5 LTC4412HV 2.5 to 36 LTC4413-1/ LTC4413-2 FET 18 Ideal Diode Controller with Off Control Input TSOT23-6 2.5 to 5.5 2.6A 40 18mV Turn-On, 140mΩ Dual Ideal Diodes with 2.6A Limit LTC4414 3 to 36 FET 36 Ideal Diode Controller for Large PFETs LTC4415 1.7 to 5.5 4A 44 15mV Turn-On, 50mΩ Dual Ideal Diodes with Adjustable 4A Limit LTC4416 3.6 to 36 FET 70 Dual Ideal Diode Controller with Enable Inputs MSOP-10 LTC4417 2.5 to 36 FET 28 Triple Supply Prioritized PowerPath Controller 4 × 4 QFN-24, SSOP-24 LTC2952 2.7 to 28 FET 65 Pushbutton and Dual Ideal Diode-OR Controller, System Supervisor 4 × 4 QFN-20, TSSOP-20 3 × 3 DFN-10 MSOP-8 3 × 5 DFN-16, MSOP-16E www.linear.com/powerpath_controllers n 1-800-4-LINEAR 1012