Ultra Hi-Rel Undersea Component Family Fused Single-Mode WDM (980/1550 nm) UWDM59 Series Product Description Oplink’s 980/1550 nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology and Oplink’s stringent quality procedures. With low insertion loss and flat passband, this deviceis ideal for combining pump (980 nm) and signal light at 1550 nm in optical fiber amplifiers. Please contact our Oplink OEM design team for further information. Oplink’s Ultra Hi-Rel family of optical components are available for your undersea applications. Please contact us with your requirements. Port 2 Signal L Port 1 In Port 4 (terminated for 1x2 configuration) Ø Port 3 Pump Performance Specificationns UWDM59 Series Premium 1,2 (970 - 990nm / 1535 - 1565nm) < 0.1 Isolation Polarization Dependent Loss Grade B 970 - 990 / 1535 - 1565 Operating Wavelength Insertion Loss Features Grade A < 0.2 Unit Ultra Low Insertion Loss dB Ultra High Isolation < 0.3 > 20 < 0.05 < 0.1 Very High Reliability nm dB < 0.1 dB Low Polarization Sensitivity High Directivity Directivity > 55 dB High Stable & Reliable Maximum Power Handling 500 mW Bidirectional Operating Temperature - 10 to + 70 °C Storage Temperature - 40 to + 85 °C Fiber Type Package Dimensions 3 HI1060 FLEX, HI980 or OFS BF05635-02 P1: 250 µm bare fiber P2: 900 µm loose tube (ø) 3.0 x (L) 47.0 (ø) 3.0 x (L) 60.0 mm Note: 1. Values are referenced without connector loss. 2. Insertion loss over operating wavelength range at ~23˚C (excluding PDL and TDL). 3. The mechanical tolerance is +/-0.2 mm on all package dimensions unless otherwise custom specified. Applications Undearsea S0172 - R04. (web) 20150217 Ultra Hi-Rel Undersea Component Family Fused Single-Mode WDM (980/1550 nm) UWDM59 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. UWDM 5 9 S Grade Wavelength 1550/980 nm= 59 Type Standard= S Configuration 1x2 = 1 2x2 = 2 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com 0 0 Premium Grade = P A Grade = A B Grade = B Fiber Length 0.5 Meter = H 1.0 Meter = 1 * 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Type P1+ HI 1060 = 16 P1+ HI 980 = 19 P1+ OFS BF05635-02 = 17 P2+ Hl 1060 FLEX = 26 P2+ Hl 980 = 29 P2+ OFS BF05635-02 = 27 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B Notes : * The tolerance of fiber length is +/-0.1m. (For connector option only, for without connector, just keep the length as minimum) * 1 meter is standard. The lead time for special fiber length will be longer. S0172 - R04. (web) 20150217 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem