Green 200 GHz Single Channel OADM (2x2) OADMG2 2x2 Series Product Description Oplink’s 200GHz single Channel OADM is based on patented athermal platform for optical device. This multiplexer features ultra low insertion loss, super thermal stability, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. Green 200GHz DWDM is Telcordia GR-1221 and GR-1209 tested, qualified for uncontrolled environment applications and complied with industry green initiatives such as RoHS and WEEE. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Performance Specificationns OADMG 200GHz (2x2) Series Min Working Wavelength Range Center Wavelength λC Channel Spacing Passband Bandwidth Insertion Loss 1) Typical Max Unit Features 1528~1640 nm ITU Grid nm Environmental Green Plan Compliance 200 GHz Ultra-Low Insertion Loss λC ± 0.25 nm Narrow Down Distribution dB Super Thermal Stability Add/Drop 0.60 0.70 Express 0.70 0.80 Add/Drop Adjacent Channel Isolation 30 dB Add/Drop Non-adjacent Channel Isolation 40 dB Express Channel Isolation 24 dB Polarization Dependent Loss (PDL) 0.20 Polarization Mode Dispersion (PMD) 0.10 Highly Reliability High Channel Isolation dB ps Return Loss 45 dB Applications Directivity 50 dB Add/Drop Channels mW Dense WDM System Operating Power 500 Operating Temperature Storage Temperature Fiber Type Package Dimensions 0 to +70 °C -40 to +85 °C CATV Fiberoptic Links Corning SMF-28 3) 125 x 90 x 8 mm Note: 1) The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified.. 2) All the parameters are excluding connectors. 3) The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. S0039 - R01. 20100616 Green 200GHz Single Channel OADM (2x2) OADMG2 2x2 Series Mechanical Drawing / Package Dimensions (dimension in mm) 8.0 125.0 15.0 COM OUT ADD 90.0 φ 3.0X4 COM IN See Detail A DROP 8.0X2 15.0 30.0 4.0 60.0 4.0 8.0 A R2.5 R1.5 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com 2.0 Units: mm 3.0 5.0 A 4.0 Section A-A Detail A Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. OADM G 2 Platform Green = G 0 1 2 0 Channel ITU Channel Number Fiber Length* 1Ch = 01 Refer ITU Channel Table 0.5 Meter = H 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Channel Spacing 200GHz = 2 Fiber Jacket 900μm Loose Tube = 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. S0039 - R01. 20100616 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules