Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Product Description Oplink’s Tap Coupler/Isolator Hybrid Combination (TCIH) is based on patented athermal platform for optical device. This product is a combination of a partial reflection filter and a polarization insensitive optical isolator that features ultra low insertion loss, super thermal stability, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. Performance Specificationns TCIHG Series Specifications Operating Wavelength Range Single Stage Dual Stage C-band: 1528 ~ 1564 L-band: 1570 ~ 1605 Unit nm Features Standard Port < 0.8 < 1.0 dB Tap Port 1% Tap Ratio: 19.2~21.0 2% Tap Ratio: 16.2~18.0 5% Tap Ratio: 12.2~14.0 10% Tap Ratio: 9.6~10.8 dB Wavelength Dependent Loss < 0.3 < 0.4 dB Reverse Direction Isolation (over operating wavelength range, 0~70°C, all SOP) Ultra Low PDL & PMD > 21 > 38 ps Highly Stable & Reliable dB Epoxy-free Optical Path Insertion Loss [1] Polarization Dependent Loss Polarization Mode Dispersion Directivity < 0.1 < 0.25 < 0.05 > 55 Compact Size dB dB Return Loss > 50 dB < 500 mW Operating Temperature Storage Temperature Package Dimensions [3] Low Insertion Loss High Isolation Maximum Power Handling Fiber Type Wide Operating Wavelength Range Corning SMF-28 Applications Fiberoptic Amplifiers 0 to +70 °C CATV Fiberoptic Links -40 to +85 °C System Monitoring P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm Note: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. Add 0.3dB on signal port IL for 10% tapping case. [2] All the parameters are excluding connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified. Fiberoptic Instruments Transmitters and Fiber Lasers Laboratory R&D S0072 - R02. 20100603 Green 1550(1585)nm Tap Coupler/ Isolator Hybrid Combination TCIHG Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250µm bare fiber COMM 34.0 mm 1 COMMON 3 REFLECT Ø 5.5 mm PASS PASS 2 TAP 54.0mm 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900µm loose tube 40.0 mm 1 COMMON 3 REFLECT Ø 5.5 mm PASS 2 60.0mm Ordering Information TCIHG Wavelength Stage 1550 nm= 1550 1585 nm= 1585 Single Stage = S Dual Stage = D Tap Ratio Fiber Length* 1% = 1 2% = 2 5% = 5 10% = 0 1.0 Meter = 1 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Jacket P1 + 250μm bare fiber = 11 P2 + 900μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. S0072 - R02. 20100603 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules