4662

SHD122612
SHD122612P
SHD122612N
SHD122612D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4662, REV. -
HIGH CURRENT HERMETIC SCHOTTKY
POWER MODULE
DESCRIPTION: A 45 VOLT, 150/120 AMP, POWER SCHOTTKY RECTIFIER IN A POTTED PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
O
IO
150
Amps
O
IO
120
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(per leg)
(t = 8.3ms, Sine)
IFSM
1000
Amps
MAXIMUM JUNCTION CAPACITANCE
(per leg)
CT
4800
pF
0.2
•C/W
Top/Tstg
-55 to
+ 150
•C
Vf
0.72
Volts
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT @ TC=100 C (P and N versions)
(per device)
MAXIMUM DC OUTPUT CURRENT @ TC=100 C (Single and D versions)
(per device)
(Vr =5.0V)
MAXIMUM THERMAL RESISTANCE
R
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed
(If = 120 Amps) (per leg)
TJ = 25 •C
TJ = 125 •C
MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV) (per leg)
TJ = 25 •C
TJ = 125 •C
0.69
Ir
9
mA
420
œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 œ
œ World Wide Web Site - www.sensitron.com œ E-Mail Address - [email protected] œ
SHD122612P
SHD122612N
SHD122612D
SENSITRON
TECHNICAL DATA
DATA SHEET 4662, REV. -
MECHANICAL DIMENSIONS: IN Inches / mm
0.370 (9.40
0.330 8.38)
1.27 (32.26
1.23 31.24)
0.64 (16.26
0.60 15.24)
0.720 (18.29
0.680 17.27)
1
2
3
0.50(12.70) Min
0.167 (4.24
Dia
0.147 3.73)
0.070 (1.78
0.050 1.27)
3 Places
0.40(10.16) Typ
0.260(6.61) Max
Epoxy Shell
Heat Sink
0.180 (4.57
0.140 3.55)
PKG. 22
PINOUT TABLE
DEVICE TYPE
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
Curves below are for die only
PIN 1
ANODE 1
CATHODE 1
ANODE
PIN 2
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
Typical Forward Characteristics
PIN 3
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
Instantaneous Reverse Current - I R (mA)
103
102
101
125 °C
100 °C
101
75 °C
100
50 °C
10-1
125 °C
25 °C
10-2
25 °C
0
100
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
150 °C
150 °C
102
10-1
0.0
0.2
0.4
0.6
Forward Voltage Drop - VF (V)
0.8
10
20
30
40
Reverse Voltage - VR (V)
50
Typical Junction Capacitance
4500
4000
3500
3000
2500
2000
1500
1000
0
10
20
30
40
Reverse Voltage - VR (V)
50
œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 œ
œ World Wide Web Site - www.sensitron.com œ E-Mail Address - [email protected] œ
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]