Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series : SEQP Features ● High voltage (32 V.DC max.) °C 1000 h ● RoHS compliance, Halogen free ● 125 Specifications Size code C6 E7 F8 E12 F13 Category temperature range –55 °C to +125 °C Rated voltage range 4 V.DC to 20 V.DC 4 V.DC to 32 V.DC 4 V.DC to 20 V.DC Rated capacitance range 22 µF to 150 µF 6.8 µF to 330 µF 15 µF to 680 µF 18 µF to 560 µF 150 µF to 1200 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list +125 °C, 1000 h/+105 °C, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value Damp heat (Steady State) tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Dimensions (not to scale) fD fd Polarity marking (−) Lot. No. + F Marking – L 15 min. 4 min. 19 min. Series Unit : mm Size code R. Capacitance R. Voltage C6 E7 F8 E12 F13 fD±0.5 6.3 8.0 10.0 8.0 10.0 L max. 6.0 7.0 8.0 12.0 13.0 F±0.5 2.5 3.5 5.0 3.5 5.0 fd±0.05 0.45 0.45 0.50 0.60 0.60 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Aluminum Solid Capacitors Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) 4.0 6.3 10 SEQP 16 20 32 150 330 560 680 1200 82 150 330 470 820 56 120 270 330 560 39 82 150 180 330 22 47 68 100 150 6.8 15 18 Case size (mm) fD L Size code 6.3 8.0 8.0 10.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 10.0 8.0 10.0 6.3 8.0 10.0 8.0 10.0 8.0 10.0 8.0 6.0 7.0 12.0 8.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 8.0 12.0 13.0 6.0 7.0 8.0 12.0 13.0 7.0 8.0 12.0 C6 E7 E12 F8 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 C6 E7 F8 E12 F13 E7 F8 E12 Specifications Ripple ✽1 Allowable ✽1 ESR ✽2 current ripple current tan d ✽3 (mΩ max.) (mAr.m.s.) (mAr.m.s.) 572 1810 40 0.12 810 2560 35 0.12 1430 4520 13 0.15 1170 3700 25 0.12 1721 5440 12 0.18 537 1700 45 0.12 810 2560 35 0.12 1170 3700 25 0.12 1332 4210 15 0.15 1721 5440 12 0.15 537 1700 45 0.12 810 2560 35 0.12 1170 3700 25 0.12 1250 3950 17 0.15 1655 5230 13 0.15 512 1620 50 0.10 670 2120 40 0.12 955 3020 30 0.12 1151 3640 20 0.15 1493 4720 16 0.15 458 1450 60 0.10 598 1890 45 0.12 759 2400 40 0.12 1050 3320 24 0.15 1367 4320 20 0.15 440 1400 100 0.10 560 1800 80 0.10 790 2500 50 0.12 LC ✽4 (µA) Part number 300 660 448 544 960 258 472 416 592 775 280 600 540 660 840 312 656 480 576 792 220 470 272 400 600 44 96 115 4SEQP150M 4SEQP330M 4SEQP560M 4SEQP680M 4SEQP1200M 6SEQP82M 6SEQP150M 6SEQP330M 6SEQP470M 6SEQP820M 10SEQP56M 10SEQP120M 10SEQP270M 10SEQP330M 10SEQP560M 16SEQP39M 16SEQP82M 16SEQP150M 16SEQP180M 16SEQP330M 20SEQP22M 20SEQP47M 20SEQP68M 20SEQP100M 20SEQP150M 32SEQP6R8M 32SEQP15M 32SEQP18M ✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C) ✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency Coefficient 120 Hz < f < 1 kHz 0.05 1 kHz < f < 10 kHz 0.3 10 kHz < f < 100 kHz 0.7 100 kHz < f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015