Conductive Polymer Aluminum Solid Capacitors Surface Mount Type Series : SVPA Features ● Low ESR (18 mΩ max.) ripple (4240 mA.r.m.s.) ● RoHS compliance, Halogen free ● High Specifications Size code Category temperature range Rated voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Damp heat (Steady State) B6 C6 E7 F8 –55 °C to +105 °C 2.5 V.DC to 20 V.DC 10 µF to 82 µF 22 µF to 180 µF 47 µF to 330 µF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Capacitance change Within ±20 % of the initial value tan d < 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Marking 2.5 V.DC to 16 V.DC 180 µF to 820 µF Dimensions (not to scale) 0.2 max. W Polarity marking (−) Lot. No. C H fD P – + L R Series R. Capacitance R. Voltage Unit : mm Size code fD±0.5 B6 C6 E7 F8 5.0 6.3 8.0 10.0 L +0.1 −0.4 5.9 5.9 6.9 7.9 W±0.2 H±0.2 C±0.2 5.3 6.6 8.3 10.3 5.3 6.6 8.3 10.3 6.0 7.3 9.0 11.0 R P±0.2 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 1.4 2.1 3.2 4.6 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 Conductive Polymer Aluminum Solid Capacitors Characteristics list Rated Rated Series voltage capacitance (V.DC) (µF) 2.5 4.0 6.3 SVPA 10 82 180 330 820 68 150 270 680 47 120 220 470 68 150 330 39 16 20 82 180 10 22 47 Case size (mm) fD L 5.0 6.3 8.0 10.0 5.0 6.3 8.0 10.0 5.0 6.3 8.0 10.0 6.3 8.0 10.0 6.3 6.3 8.0 10.0 5.0 6.3 8.0 5.9 5.9 6.9 7.9 5.9 5.9 6.9 7.9 5.9 5.9 6.9 7.9 5.9 6.9 7.9 5.9 5.9 6.9 7.9 5.9 5.9 6.9 Size code B6 C6 E7 F8 B6 C6 E7 F8 B6 C6 E7 F8 C6 E7 F8 C6 E7 F8 B6 C6 E7 Specifications Ripple ✽1 ESR ✽2 current tan d ✽3 (mΩ max.) (mAr.m.s.) 1970 30 0.12 2690 20 0.12 3370 20 0.12 4240 19 0.12 1970 30 0.12 2570 22 0.12 3220 22 0.12 4130 20 0.12 1970 30 0.12 2570 22 0.12 3220 22 0.12 4130 20 0.12 2200 30 0.12 2760 30 0.12 3770 24 0.12 2040 35 0.12 2460 24 0.12 2760 30 0.12 3430 29 0.12 1700 40 0.12 2040 35 0.12 2630 33 0.12 LC ✽4 (µA) 300 300 500 500 300 300 500 544 300 300 500 592 300 500 660 300 300 262 576 80 88 188 Standard (Reel size : f380) Min. Packaging Q'ty Part number (pcs) 2R5SVPA82MAA 1500 2R5SVPA180MAA 1000 2R5SVPA330MAA 1000 2R5SVPA820M 500 4SVPA68MAA 1500 4SVPA150MAA 1000 4SVPA270MAA 1000 4SVPA680M 500 6SVPA47MAA 1500 6SVPA120MAA 1000 6SVPA220MAA 1000 6SVPA470M 500 10SVPA68MAA 1000 10SVPA150MAA 1000 10SVPA330M 500 16SVPA39MAA 1000 16SVPA39MAAY 1000 16SVPA82MAA 1000 16SVPA180M 500 20SVPA10M 1500 20SVPA22M 1000 20SVPA47M 1000 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency 120 Hz < f < 1 kHz 1 kHz < f < 10 kHz 10 kHz < f < 100 kHz 100 kHz < f < 500 kHz Coefficient 0.05 0.3 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015