680

SENSITRON
SEMICONDUCTOR
SHD120212
TECHNICAL DATA
DATA SHEET 680, REV. B
HERMETIC POWER SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
DESCRIPTION: A 45 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC LCC-5 PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
45
Volts
IO
15
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine)
IFSM
150
Amps
MAXIMUM JUNCTION CAPACITANCE
CT
800
pF
2.65
C/W
Top/Tstg
-65 to
+ 150
C
SYMBOL
MAX.
UNITS
Vf
0.65
Volts
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT
(@ TC=100 C)
(Vr = 5V, TJ, = 25 C,
fSIG = 1MHz, VSIG = 50mV P-P))
MAXIMUM THERMAL RESISTANCE
(Junction to Case)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps)
TJ = 25 C
0.60
TJ = 125 C
MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV)
TJ = 25 C
TJ = 125 C
Ir
1.5
70
Note: VF Curves are shown for die only.
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
mA
SHD120212
TECHNICAL DATA
DATA SHEET 680, REV. B
MECHANICAL DIMENSIONS: IN Inches / mm
LCC-5
PINOUT TABLE
DEVICE TYPE
DUAL RECTIFIER, COMMON CATHODE (P)
PIN 1
CATHODE
PIN 2
ANODE
Typical Reverse Characteristics
Instantaneous Reverse Current - I R (mA)
Typical Forward Characteristics
101
150 °C
102
150 °C
1
10
125 °C
100 °C
100
75 °C
-1
10
50 °C
10-2
25 °C
125 °C
0
10
10-3
0
25 °C
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
PIN 3
ANODE
10-1
0.0
0.2
0.4
0.6
Forward Voltage Drop -FV(V)
0.8
10
20
30
40
Reverse Voltage - RV (V)
50
Typical Junction Capacitance
800
700
600
500
400
300
200
0
10
20
30
40
Reverse Voltage - RV (V)
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
50
SHD120212
TECHNICAL DATA
DATA SHEET 680, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]