IDH04SG60C Data Sheet (545 KB, EN)

IDH04SG60C
3rd Generation thinQ!TM SiC Schottky Diode
Features
Product Summary
• Revolutionary semiconductor material - Silicon Carbide
VDC
600
V
• No reverse recovery / No forward recovery
QC
4.5
nC
• Temperature independent switching behavior
IF; TC< 130 °C
4
A
• Switching behavior benchmark
• High surge current capability
• Pb-free lead plating; RoHS compliant
• Qualified according to JEDEC1) for target applications
• Breakdown voltage tested at 20mA2)
• Optimized for high temperature operation
• Lowest Figure of Merit QC/IF
thinQ! 3G Diode designed for fast switching applications like:
• SMPS e.g.; CCM PFC
• Motor Drives; Solar Applications; UPS
Type
Package
Marking
Pin 1
Pin 2
IDH04SG60C
PG-TO220-2
D04G60C
C
A
Maximum ratings
Parameter
Symbol Conditions
Continuous forward current
IF
Value
T C<130 °C
4
Surge non-repetitive forward current, I F,SM
sine halfwave
T C=25 °C, t p=10 ms
18
T C=150 °C, t p=10 ms
13.5
I F,max
T C=25 °C, t p=10 µs
120
∫i 2dt
T C=25 °C, t p=10 ms
1.8
T C=150 °C, t p=10 ms
0.93
Non-repetitive peak forward current
Unit
A
A2s
i ²t value
Repetitive peak reverse voltage
V RRM
T j=25 °C
600
V
Diode dv/dt ruggedness
dv/ dt
VR= 0….480 V
50
V/ns
Power dissipation
P tot
T C=25 °C
43
W
Operating and storage temperature
T j, T stg
-55 ... 175
°C
Soldering temperature,
wavesoldering only allowed at leads
T sold
Mounting torque
Rev. 2.4
1.6mm (0.063 in.)
from case for 10s
260
M3 and M3.5 screws
60
page 1
Ncm
2012-12-12
IDH04SG60C
Parameter
Values
Symbol Conditions
Unit
min.
typ.
max.
-
-
3.5
-
-
62
600
-
-
Thermal characteristics
Thermal resistance, junction - case
R thJC
Thermal resistance,
junction - ambient
R thJA
Thermal resistance,
junction- ambient,
leaded
K/W
Electrical characteristics, at T j=25 °C, unless otherwise specified
Static characteristics
DC blocking voltage
V DC
I R=0.05 mA, T j=25 °C
Diode forward voltage
VF
I F=4 A, T j=25 °C
-
2.1
2.3
I F=4 A, T j=150 °C
-
2.8
-
V R=600 V, T j=25 °C
-
0.3
25
V R=600 V, T j=150 °C
-
1.3
270
-
4.5
-
nC
-
-
<10
ns
pF
Reverse current
IR
V
µA
AC characteristics
Total capacitive charge
Qc
Switching time3)
tc
V R=400 V,I F≤I F,max,
di F/dt =200 A/µs,
T j=150 °C
Total capacitance
C
V R=1 V, f =1 MHz
-
80
-
V R=300 V, f =1 MHz
-
10
-
V R=600 V, f =1 MHz
-
10
-
1)
J-STD20 and JESD22
2)
All devices tested under avalanche conditions, for a time periode of 10ms, at 20mA.
3)
tc is the time constant for the capacitive displacement current waveform (independent from T j, ILOAD and
di/dt), different from trr which is dependent on Tj, ILOAD and di/dt. No reverse recovery time constant trr due
to absence of minority carrier injection.
4)
Under worst case Zth conditions.
5)
Only capacitive charge occuring, guaranteed by design.
Rev. 2.4
page 2
2012-12-12
IDH04SG60C
1 Power dissipation
2 Diode forward current
P tot=f(T C); parameter: RthJC(max)
I F=f(T C)4); T j≤175 °C; parameter: D = t p/T
30
45
40
0.1
25
35
20
25
IF [A]
Ptot [W]
30
20
15
0.3
10
0.7
0.5
15
1
10
5
5
0
25
50
75
100
125
150
0
175
25
75
TC [°C]
125
175
TC [°C]
3 Typ. forward characteristic
4 Typ. forward characteristic in surge current
mode
I F=f(VF); t p=400 µs; parameter:T j
I F=f(VF); t p=400 µs; parameter: T j
5
15
-55ºC
4
12
25ºC
25ºC 150ºC
-55ºC
100ºC
3
9
IF [A]
IF [A]
175ºC
2
100ºC
6
150ºC
175ºC
1
3
0
0
0
1
2
3
4
5
VF[V]
Rev. 2.4
0
2
4
6
8
VF[V]
page 3
2012-12-12
IDH04SG60C
5 Typ. capacitance charge vs. current slope
6 Typ. reverse current vs. reverse voltage
5)
Q C=f(di F/dt ) ; I F≤I F,max
I R=f(VR); parameter: T j
101
4
100
3
10-1
IR [µA]
Qc [nC]
5
2
175 °C
150 °C
10-2
100 °C
25 °C
1
-55 °C
10-3
0
100
400
700
10-4
1000
100
200
300
diF/dt [A/µs]
400
500
600
VR [V]
7 Transient thermal impedance
8 Typ. capacitance vs. reverse voltage
Z thJC=f(t p); parameter: D = t P/T
C =f(V R); T C=25 °C, f =1 MHz
101
80
70
60
0.5
100
ZthJC [K/W]
50
C [pF]
0.2
0.1
0.05
40
30
10-1
0.02
20
10
0
0
10-2
10-6
10-5
10-4
10-3
10-2
10-1
tp [s]
Rev. 2.4
page 4
100
101
VR [V]
102
103
2012-12-12
IDH04SG60C
9 Typ. C stored energy
E C=f(V R)
2.5
2.0
Ec [µJ]
1.5
1.0
0.5
0.0
0
200
400
600
VR [V]
Rev. 2.4
page 5
2012-12-12
IDH04SG60C
PG-TO220-2: Outline
Dimensions in mm/inches
Rev. 2.4
page 6
2012-12-12
IDH04SG60C
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2012 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics. With respect to any examples or hints given herein, any typical
values stated herein and/or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please
contact the nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information
on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems
and/or automotive, aviation and aerospace applications or systems only with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support , automotive, aviation and
aerospace device or system or to affect the safety or effectiveness of that device or system.
Life support systems are intended to be implanted in the human body and/or maintain
and sustain and/or protect human life. If they fail, it is reasonable to assume that the health
of the user or other persons may be endangered.
Rev. 2.4
page 7
2012-12-12