Combined Antenna Module - Body Mount APAMPSBJ-144 RoHS/RoHS II Compliant MSL level: Not Applicable Ø 77.3mm x 66.5mm TYPICAL APPLICATIONS: FEATURES: • Active GPS and Multiband External Antenna, • Covering Active GPS / GLONASS (1592 - 1610 MHz) • Cellular: AMPS (850 MHz), GSM (900 MHz), DCS (1800 MHz), PCS (1900 MHz), • 3G (UMTS 2.1 GHz) • WiFi / Bluetooth (2.4GHz) • LTE (791-960/1710-2690 MHz) • 2 coaxial output feeds; active GNSS and Other bands • IP67, IK09, IP69K approved • Body Mount attachment • LNA Gain: 23dB at3V, 24dB at 5V • Cellular Gain: 2dBi • Cellular VSWR<2.5:1 • RoHS/RoHS II compliant • 2J Technology • Vehicle GPS/GLONASS, Cellular and UMTS (3G and LTE) • Vehicle Cellular Routers STANDARD SPECIFICATIONS: Mobile (Cable1) Parameters Min. 791 1710 Navigation (Cable 2) Parameters Receiving Frequency Impedance VSWR Noise figure Polarization Model Ceramic Patch Gain Operating Temperature ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Max. 960 2960 850 900 1800 1900 2.1 2.4 Receiving Frequency VSWR Polarization Model Impedance Gain Power Handling Operating Temperature Typ. Units MHz MHz MHz MHz MHz MHz GHz GHz Note 4G/LTE 4G/LTE AMPS GSM DCS PCS 3G-UMTS BLUETOOTH 2.5:1 Linear 50 2 25 -40 Min. 1572 1.2 2 -40 +85 Typ. 50 RHCP Max. 1610 1.5:1 3 +85 LLC Ω dBi W ˚C Units MHz Ω Note GPS+GLONASS dB dBic ˚C @ zenith 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.14.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Combined Antenna Module - Body Mount APAMPSBJ-144 RoHS/RoHS II Compliant Ø 77.3mm x 66.5mm Low Noise Amplifier (LNA) Parameters DC Voltage Min. 2.7 Typ. Gain Current Power Operating Temperature 15 -40 Max. 5.5 23 24 25 138 +85 Units V dB dB mA mW ˚C Note @ 3.0V @ 5.0V MEASUREMENTS Radiation Patterns Azimuth 45˚ and Elevation 45˚ ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Frequency=798MHz Az=45 EL=45 Frequency=853MHz Az=45 EL=45 Frequency=897MHz Az=45 EL=45 Frequency=1799MHz Az=45 EL=45 Frequency=1909MHz Az=45 EL=45 Frequency=2107MHz Az=45 EL=45 LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.14.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Combined Antenna Module - Body Mount APAMPSBJ-144 RoHS/RoHS II Compliant Ø 77.3mm x 66.5mm MEASUREMENTS Frequency=2404MHz Az=45 EL=45 Frequency=2602MHz Az=45 EL=45 Frequency=1575.42MHz Az=45 EL=45 OUTLINE DIMENSION: Parameters RF Connector Weight Cable Type Cable Length Lid Base Gasket Color Certificates Ceramic Patch Size Description LTE (Cable 1) - SMA male GNSS (Cable 2) - SMA male 150g Cable 1 – RG174U Cable 2 - RG174U 15cm ABS Zamak TPE Black IP67, IK09, IP69K 24x24x4mm Dimension: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.14.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Combined Antenna Module - Body Mount APAMPSBJ-144 RoHS/RoHS II Compliant Ø 77.3mm x 66.5mm GNSS Log Mag - 1575.42MHz Gain at 3.0V Note: Measurements made with Antenna mounted on 20x20cm metal ground plane, with a 15cm cable RG174 used for testing. LTE Responses LTE S11 (Log Mag) LTE S11 (VSWR) Dimension: mm ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.14.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale Combined Antenna Module - Body Mount APAMPSBJ-144 RoHS/RoHS II Compliant Ø 77.3mm x 66.5mm PACKAGING: Each antenna is packaged in a 140x120x81mm size box. Each 20 boxes are packaged in one 465x310x250mm size box. Each 30 boxes are packaged in a 590x390x230mm size box. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. NOTE: 1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 4) When changing your production process, please notify ABRACON immediately. 5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applicaFor applications requiring tions or any application requiring high reliability where component failure could result in loss of life and/or property. high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 6) All specifications and Marking will be subject to change without notice. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED LLC 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.14.15 Ph. 949.546.8000 | Fax. 949.546.8001 Visit www.abracon.com for Terms and Conditions of Sale