THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. WIDTH 24" HEIGHT 24" DEPTH 12" WEIGHT 90 LBS / 41 KG NOTES: 1. Each Zone System includes: - Allen-Bradley(TM) Stratix(TM) industrial switch with sufficient expansion modules to obtain the specified number of down-link ports. - Allen-Bradley(TM) fiber uplinks or copper uplinks. - Allen-Bradley(TM) 24 Volt Power Supplies. - Panduit 24 Volt UPS (UPS003024024015) and Load Sense Module (UPS003LSM). - One dedicated 5ft copper patch cord for UPS remote management. - 3ft copper patch cords and CAT6 MINI-COM(R) copper modules to accommodate the number of downlink ports. - 8-port DIN mount patch panel (1 or 2 as needed). - Either 1 meter Fiber optic uplink patch cords with fiber optic adapter modules, or 3ft copper patch cords with CAT6 MINI-COM(R) copper modules to accommodate the amount of uplinks. - Fiber Surface Mount Box for Fiber Optic uplink patching. - All Cable Management systems pre-installed (including strain relief bars, L-rings and fiber slack spool), protective cover over all AC wiring and devices, and a gland plate for cabling entry and exit. 2. All Network Zone Systems require a 100-250V ac single-phase feed. 3. All Network Zone Systems comply with UL 508A standards, and all have UL type 4/12 and IP66 ratings. 4. Electrical components rated for use in Class 1, Division 2 environments. 5. The Network Zone System is wall mountable with the option to use outside-mount flanges which are included. 6. 316 Stainless steel enclosures are rated NEMA 4X. 7. STEEL AND STAINLESS STEEL ENCLOSURES ARE MADE FROM 16 GAUGE STEEL MODEL FILENAME 12V304CM/02.PRT CAD FILENAME/LAYERS 12V304CM_DC/02A.PRT PANDUIT CORP. TINLEY PARK, ILLINOIS Z22N-****5* NETWORK ZONE SYSTEM UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.06 X.XX +/- 0.03 X.XXX +/- 0.015 DRAWN BY RHG 02A DATE 3/3/15 NWW TIMH UPDATED PART NUMBER TABLE ON SHEET 2 12V304CM 7/31/14 CHK'D REV DATE BY CHK DESCRIPTION ECN - R CUST SUP OTH NWW METRIC X. X.X X.XX - MILLIMETER +/- 1.5 +/- 0.8 +/- 0.4 UNLESS OTHERWISE SPECIFIED, ANGLE ALL DIMENSIONS ARE GIVEN +/- 1 IN INCHES, THIRD ANGLE PROJECTION. SCALE MAT'L: N/A 1:8 DRAWING NO. 12V304CM SHEET 1 OF 2 DWG A SIZE THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PART NUMBER ENCLOSURE TYPE ALLEN BRADLEY SWITCH ALLEN BRADLEY ALLEN BRADLEY NUMBER OF DOWNLINK ALLEN BRADLEY COPPER EXPANSION FIBER EXPANSION PATCH CORDS UPLINK TRANSCEIVER NUMBER OF UPLINK PATCH CORDS Z22N-6DAD5 316 STAINLESS STEEL (1) 1783-BMS10CGA NONE NONE (8) UTP COPPER (2) 1783-SFP1GSX (2) 1GbE MM FIBER Z22N-SBAB5 4/12 STEEL (1) 1783-MS10T NONE NONE (8) UTP COPPER (2) 1783-SFP100FX (2) 1GbE MM FIBER Z22N-SDAA5 4/12 STEEL (1) 1783-BMS10CGA NONE NONE (8) UTP COPPER NONE (2) UTP COPPER Z22N-SDAB5 4/12 STEEL (1) 1783-BMS10CGA NONE NONE (8) UTP COPPER (2) 1783-SFP100FX (2) 1GbE MM FIBER Z22N-SDAD5 4/12 STEEL (1) 1783-BMS10CGA NONE NONE (8) UTP COPPER (2) 1783-SFP1GSX (2) 1GbE MM FIBER Z22N-SEAD5 4/12 STEEL (1) 1783-BMS20CGP NONE NONE (16) UTP COPPER (2) 1783-SFP1GSX (2) 1GbE MM FIBER Z22N-SHAD5 4/12 STEEL (1) 1783-BMS20CGN NONE NONE (16) UTP COPPER (2) 1783-SFP1GSX (2) 1GbE MM FIBER Z22N-SIAA5 4/12 STEEL (1) 1783-BMS10CGN NONE NONE (8) UTP COPPER NONE (2) UTP COPPER Z22N-SIAD5 4/12 STEEL (1) 1783-BMS10CGN NONE NONE (8) UTP COPPER (2) 1783-SFP1GSX (2) 1GbE MM FIBER MODEL FILENAME 12V304CM/02.PRT CAD FILENAME/LAYERS 12V304CM_DC/02A.PRT PANDUIT CORP. TINLEY PARK, ILLINOIS Z22N-****5* NETWORK ZONE SYSTEM UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: INCHES X.X +/- 0.06 X.XX +/- 0.03 X.XXX +/- 0.015 DRAWN BY RHG 02A DATE 3/3/15 NWW TIMH DETAILS ON SHEET 1 12V304CM 7/31/14 CHK'D REV DATE BY CHK DESCRIPTION ECN - R CUST SUP OTH NWW METRIC X. X.X X.XX - MILLIMETER +/- 1.5 +/- 0.8 +/- 0.4 UNLESS OTHERWISE SPECIFIED, ANGLE ALL DIMENSIONS ARE GIVEN +/- 1 IN INCHES, THIRD ANGLE PROJECTION. SCALE MAT'L: N/A 1:8 DRAWING NO. 12V304CM SHEET 2 OF 2 DWG A SIZE