4 3 2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. NOTES, UNLESS OTHERWISE SPECIFIED: EST. WT. 1.69lbs. (768mg) Tool Only 1.82lbs. (827.8mg) Tool & Tip Collector Maximum Bundle Diameter for PLT1.5M-XMR & BT1.5M-XMR is .82 inches (2.0828cm) 1.34 D Cable Ties D 34.03 PAT1.5M4.0 Tools are for PLT Ties and PAT1.5M4.0-BT Tools are for BT Ties 1.60 40.53 x 0 0 * 0000000 * ADJUST OPTIMAL SETTING TENSION CUTOFF FOR 2.14 54.46 10.12 256.94 C C 2.08 9.15 x 0 * 000 0000 *0 00 x 0 0* 00000 * 232.39 x0 0 52.83 * 00 * 00 00 B B 6.76 OPTIMAL CUTOFF SETTING FOR ADJUST TENSION 171.64 ON SI EN TT FOR F S JU ING TOF AD TT U SE ALC M TI P O N NSIO ST TE ADJU FOR G IN SETT TOFF AL CU OPTIM 1.99 50.47 2.64 67.15 1.57 39.77 1.79 .25 45.45 Trigger travel is .482 or 12.2428mm. 6.27 A A 1.64 41.54 TITLE & PAT1.5M4.0-BT CUSTOMER DRAWING PAT1.5M4.0 CONTROL DRAWING ITEM REVISION NAME R27942AA/00 DATASET FILE NAME R27942AA_DS_WT27942D01/00A MATERIAL: UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XX .1 [2.54] .01 [.25] .XXX ANGLES N/A .005 [.127] 5 DRAWING NUMBER: 00 4/11/16 LAH ALP ALP THIRD ANGLE PROJECTION 4757A RELEASED DRAWN BY REV 4 3 2 DATE BY CHK APR DESCRIPTION ECN LAH 1 DATE CHK 4/11/16 ALP WT27942D01 SIZE SCALE 1:1 SHT 1 OF 1 D