Features ■ Optimized for video over ADSL2+ / VDSL2 ■ Meets requirements of ITU G.992.3/.5 and applications ■ Superior handling of ring currents at 400 - 500 mA ■ Service interoperability and compatibility ■ Multiple “Home Run” connections ANSI T1.413 ■ UL Listed per UL 1863 ■ Optional Insulation Displacement Connectors (IDC) 361xA2 Series ADSL2+ / VDSL2 POTS Splitters The Bourns® 3610A2, 3611A2 and 3612A2 are high quality ADSL2+ / VDSL2 POTS splitters designed to fit industry-standard Network Interface Devices (NIDs). The new POTS splitters are optimized for high bit-rate video over ADSL2+ / VDSL2 applications. The products are ANSI T1.413 compliant and meet the requirements of ITU G.992.3 and G.992.5 and can be used with ADSL, ADSL2+, VDSL and VDSL2. The 361xA2 POTS splitters accept the incoming combined voice & data service, filter off the voice (POTS) channel and provide a connection point for the DSL data services (ADSLx modem). In the event of power loss, the passive filter design allows for lifeline POTS service. Bourns offers the ADSL2+ POTS splitter in three industry standard footprints (binding post, snap in and bus mount) which occupy only a single space in the NID. Fitted with screw terminals and flying leads, the 361xA2 units can be installed in minutes. When combined with a Bourns® Multi-Stage (MSP®) Station Protector, Sealed Switching Jack, and optional IDC expansion bridge, a complete ADSL2+ / VDSL2 solutions package is provided for the customer premises. Characteristics DC Loop Current ................................................................................................................................... 0-100 mA DC Loop Voltage ................................................................................................................................... 0 to -60 V DC Resistance....................................................................................................................................... ≤25 ohms Insertion Loss (Voice Band)................................................................................................................... <1.0 dB Attenuation Distortion (Voice Band)....................................................................................................... < ±0.5 dB Delay Distortion (Voice Band)................................................................................................................ <200 μs Return Loss (Voice Band)...................................................................................................................... 8 dB ERL; 5 dB SRL-Low; 5 dB SRL-High Longitudinal Balance, Two Port Technique, POTS to Line Port (U-R); Line Port to POTS ................... >58 dB @ 0.2 to 1 kHz >53 dB @ 3 kHz ADSL Band Attenuation ......................................................................................................................... >65 dB @30 kHz – 300 kHz >55 dB @301 kHz – 20 MHz Tip to Ring Capacitance (POTS Port) ................................................................................................... <115 nF Imput Impedance (Loading the ADSL Band) ......................................................................................... <0.25 dB 30 kHz – 30 MHz Storage and Operating Temperature ..................................................................................................... -55 to +85 °C How To Order Stud Mount ............................................................................................................................................ Part #3610A2 Stud Mount w/IDC ................................................................................................................................. Part #3610A2-IDC Press Mount .......................................................................................................................................... Part #3611A2 Bus Mount ............................................................................................................................................. Part #3612A2 Band Attenuation Band Attenuation 0 18 -10 16 Inductance (mH) Attenuation (dB) -20 -30 -40 -50 -60 -70 -80 12 10 8 6 4 -90 -100 100k 14 1M Frequency (Hz) 10M 30M 2 0 0 100 200 300 400 500 600 DC current (mA) (Ring Current) “MSP” is a registered trademark of Bourns, Inc. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 361xA2 Series ADSL2+ / VDSL2 POTS Splitters Product Dimensions 3610A2-IDC 3610A2 56 (2.20) 26.3 (1.04) 45 (1.77) T T VOICE R R STATION PROTECTOR MODEM 3611A2 75.9 (2.98) 19 (0.75) 41.1 (1.62) 39.6 (1.56) 61.5 (2.42) 22.1 (.87) DIMENSIONS: 3612A2 MILLIMETERS (INCHES) 25.1 (0.99) 41.2 (1.62) 34.8 (1.37) 10.8 (0.43) 63.2 (2.49) Installation Diagrams 3610A2-IDC Mounting Post Ground Terminal 3611A2 85122-T4 POTS Module 3612A2 StationProtector Ground Bar Subscriber Bridge Station Protector 85122-T (Supplied) DATA Module 3611A2 Splitter Station Protector / Bridge 3612A2 Splitter 3610A2 Splitter CUSTOMER SIDE To Modem From C.O. LOCKED TELCO SIDE To Phone From C.O. To Phone To Phone From C.O. To Modem REV. F 04/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. To Modem