Features ■ Optimized for video over ADSL2+ applications ■ Improves ADSL performance for short loops ■ Maximizes SNR across ADSL bins in customer premise ■ Service interoperability and compatibility ■ Multiple “Home Run” connections ■ UL Listed (File: E116756) 366x Series Binder Equalization Module Bourns® 366x Series of ADSL Binder Equalization Modules are designed to enhance the deployment of ADSL and ADSL2/2+ service at the customer premises. Bourns, Inc. has worked closely with Allied Telesyn, Inc. in optimizing the patent pending product for high bit rate video over ADSL2+ applications. The Binder Equalization Module improves line performance for installations where the customer premises is near the Remote Terminal or Central Office (headend) by equalizing the ADSL / ADSL2+ signal levels in the OSP (outside cable plant). The equalization shaping maximizes the signal to noise ratio (SNR) in the ADSL band without impacting POTS band performance. In the event of power loss, the passive design allows continued lifeline POTS service. The 366x Series is available in three footprints for installation in most industry standard Network Interface Devices (NIDs). Custom product is available with various degrees of attenuation. The 366x occupies only a single space in Bourns® and other manufacturers’ NIDs. Characteristics DC Loop Current ................................................................................................................................... 0-100 mA DC Loop Voltage ................................................................................................................................... 0 to -60 V DC Resistance....................................................................................................................................... 132 ohms Tip to Ring Capacitance ........................................................................................................................ 100 nF @ 30 Hz How To Order Stud Mount ............................................................................................................................................ Part #3660 Press Mount .......................................................................................................................................... Part #3611 Bus Mount ............................................................................................................................................. Part #3662 Product Dimensions 3660 3661 3662 75.9 (2.98) 56 (2.20) 26.3 (1.04) 45 (1.77) 25.1 (0.99) 19 (0.75) 41.2 (1.62) 34.8 (1.37) 39.6 (1.56) MILLIMETERS DIMENSIONS: (INCHES) 63.2 (2.49) 10.8 (0.43) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 366x Series Binder Equalization Module Installation Diagrams 3660 3661 MOUNTING POST 2378 PROTECTOR 85122-T4 POTS MODULE GROUND TERMINAL 3661 MODULE 2377 PROTECTOR LINE DATA 3611 SPLITTER DATA IN OUT 3610A SPLITTER 85122-T DATA MODULE LINE DATA 3660 MODULE 3662 LOCKED TELCO SIDE FROM C.O. TO DATA EQUIPMENT TO PHONE TO DATA EQUIPMENT FROM C.O. TO PHONE 3662 2360 PROTECTOR 3662 MODULE 3612 SPLITTER Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com FROM CO DATA VOICE REV. D 04/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.