Features ■ 10 x 32 stainless steel binding post to connect ground straps and wiring ■ Hinged cover and outside mounting feet ■ Sectionalized grommet in base for wire entry ■ Listed per UL 497 & 1863 (File: E53117, E116756) 7040 Series – Station Protector Enclosure The Model 7040 Series Station Protector is designed to protect telecommunication network services from overvoltages at the subscriber end of the loop. The 7040 accommodates up to two Station Protectors or one ADSL/VDSL POTS Splitter and one Station Protector. The 7040 features a versatile, weather resistant enclosure, manufactured of high-impact resistant, ultraviolet-desensitized, flame retardant plastic. The enclosure can be custom embossed with a company logo or other details (see Custom Logo/Housing in How to Order chart below). How to Order Product Dimensions 7040 - 0X - X X - X1 Model Number Designator Number of Twisted Pair Lines 1 = One Line (Max. for DSL) 2 = Two Lines Station Protector Options D 1 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) U 3 = 455HS-MSP (2377-45-HS-IDC) Voice/DSL/Data (UL,cUL) Z 1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) W 3 = 455HS-BC* (2377-45-BC-IDC) Balance-Sensitive DSL (UL, cUL) V 3 = 455-MSP-TBU (2377-45-HS-TBU) MSP w/TBU® Protector (UL, cUL) Q 3 = 455BC-MSP-TBU* (2377-45-BC-TBU) Balance-Sensitive MSP w/TBU® Protector (UL, cUL) High Wide Deep 144.8 (5.7) 86.4 (3.4) 55.9 (2.2) DIMENSIONS: MM (INCHES) Installation Diagram E 2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) Y 2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) G = 155G (2378-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) Station Protector K = 356G (2377-35-G) Balanced GDT, No Back-Up-Gap (UL, cUL) R 3 = 356G (2377-35-G-IDC) Balanced GDT, No Back-Up-Gap (UL, cUL) T = Tii355M O = No Station Protectors (Not available with DSL configurations) 3610x POTS Splitter *For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty Note 3 = Insulation Displacement Connectors (IDC) Custom Logo/Housing Special markings available. Leave blank if no special logo desired. POTS Splitter Options † P1 = (1) 3610A2 ADSL 2+ POTS Splitter, UL Listed P1-I = (1) 3610A2-IDC ADSL 2+ POTS Splitter w/IDC, UL Listed From C.O. To Modem To POTS V1 = (1) 3610V2 VDSL 2 POTS Splitter, UL Listed V1-I = (1) 3610V2-IDC VDSL 2 POTS Splitter w/IDC, UL Listed † DSL Configuration Note: Can only be ordered in one line configurations. Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com REV. N 04/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.