Pan-Term Terminals, Ferrules, and Crimping Tools

CONTOUR CRIMP
™
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Part
Number
CT-1525
CT-1550
C o n t r o l l e d C y c l e C r i m p i n g To o l s – F e r r u l e E n d s S l e e v e s
Std.
Pkg.
Qty.
Description
Crimps PANDUIT #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG fully
insulated disconnects and insulated parallel splices. Crimps PANDUIT #22 – 14 AWG
barrel insulated disconnects.
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1550 has the red/blue pocket closest to the pivot, which
provides a reduced crimp effort for those who make red/blue terminations.
1
Crimps PANDUIT #8 – 2 AWG non-insulated tubular terminals (S series) and
copper flexible lugs (does not include LCAF, LCCF and SCSF connectors),
#8 – #1 AWG copper code conductor lugs and splices, #6 – #4 AWG dual rated
aluminum lugs, splices and copper code conductor for CTAPF10-16 to
CTAPF3-12 copper taps. Includes 5-position, color-coded rotating die.
1
CT-1701
Crimps PANDUIT #10 – 2 AWG non-insulated large gauge ring terminal
(P series). Crimps #12 – 4 AWG copper lugs and splices. Includes 5-position
rotating die.
1
CT-1014
Crimps PANDUIT #22 – 14 AWG loose piece DISCO-LOK ™ Disconnects.
1
CT-1015
Crimps PANDUIT #22 – 14 AWG loose piece SUPRA-GRIP Disconnects.
1
CT-1550
CT-1570
CT-1700
™
1
CT-1003
CT-1123
Description
1
Crimps PANDUIT #22 – 8 AWG single wire insulated ferrules (DIN).
#22 – 8 AWG single wire insulated ferrules (French).
#22 – 10 AWG insulated dual-wire (DIN) ferrules.
#22 – 10 AWG non-insulated ferrules.
1
CT-1004
Crimps PANDUIT #8 – 6 AWG single wire insulated ferrules (DIN).
#8 – 6 AWG single wire insulated ferrules (French).
#10 AWG insulated dual-wire (DIN) ferrule.
#8 – #6 AWG non-insulated ferrules.
1
CT-1005
Crimps PANDUIT #4 – #2 AWG single wire insulated ferrules (DIN).
#4 – #2 AWG single wire insulated ferrules (French).
#4 – #2 AWG non-insulated ferrules.
1
CT-1006
Crimps PANDUIT #1 AWG single wire insulated ferrules (DIN) and (French)
#1 AWG non-insulated ferrules.
1
CT-1104
Controlled cycle square crimp profile tool for #8 – 6 AWG (10 – 16mm²)
insulated and non-insulated ferrules.
1
CT-1123
Controlled cycle square crimp profile tool for #26 – 8 AWG (.14 – 10mm²)
insulated and non-insulated ferrules.
1
CT-1003
1
Std.
Pkg.
Qty.
Crimps PANDUIT #26 – 10 AWG single wire insulated ferrules (DIN).
#26 – 10 AWG single wire insulated ferrules (French).
#22 – 12 AWG insulated dual-wire (DIN) ferrules.
#24 – 10 AWG non-insulated ferrules.
1
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1551 has the yellow pocket closest to the pivot, which
provides a reduced crimp effort for those who make yellow terminations.
Crimps most PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated terminals
and disconnects. Crimps PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated
splices, and #10 AWG compression lugs.
CT-1551
Part
Number
CT-1002
Part
Number
CT-300-1
CT-310
Description
Crimps PANDUIT #22 – 14 AWG fully insulated right angle disconnects.
(DNFR-FIB series).
1
Crimps PANDUIT #22 – 10 AWG heat shrink insulated terminals, disconnects,
and splices.
1
H a n d O p e r a t e d P l i e r Ty p e C r i m p i n g To o l s
Part
Number
CT-100A
CT-300-1
Part
Number
CT-720
Description
Provides manual UL Listed terminations of PANDUIT ® PAN-TERM ® #8 – 2 AWG Vinyl
Insulated Terminals. Manual crimping tool for UL Listed or Recognized and CSA
Certified terminations of PANDUIT ® PAN-LUG ™ Copper Compression Lugs and Splices
for #8 AWG – 500 kcmil copper code conductor and aluminum compression lugs and
splices for #6 AWG – 350 kcmil copper and aluminum code conductors.
Std.
Pkg.
Qty.
1
CT-100A
Std.
Pkg.
Qty.
Description
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips wire.
Excellent all-around application tool of heat treated finished steel with comfortable
cushioned plastic grip handles.
1
CT-160
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts three U.S. and three metric screw sizes. Cuts and
strips wire. Has insulation closure pocket.
1
CT-260
Forged steel tool. Crimps PANDUIT #22 – 10 AWG insulated and non-insulated
terminals. Cuts wire.
Forged steel tool. Crimps most PANDUIT #22 – 10 AWG non-insulated terminals,
disconnects, and splices. Cuts wire.
1
1
D i e Ty p e , M a n u a l C r i m p i n g To o l
CT-200
PAN-TERM ® Terminals, Ferrules, and Crimping Tools combine
to deliver the highest quality terminations at the lowest installed
cost. Offering the highest documented performance in the
industry, PANDUIT terminals are UL Listed and Recognized,
CSA Certified, Nuclear Certified, ABS (American Bureau of
Shipping) Approved and meet applicable military specifications.
PANDUIT crimping tools are designed to increase productivity
and minimize repetitive stress injuries delivering consistent
terminations for maximum reliability throughout the
physical infrastructure.
Key Features
Benefits
PAN-TERM ® Terminals and Ferrules
Performance exceeds
UL and CSA requirements
Manufactured with electrolytically
refined copper and tin-plated
Comprehensive selection of terminals
and ferrules
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Std.
Pkg.
Qty.
PAN-TERM ® Terminals, Ferrules,
and Crimping Tools
Provides assurance that terminals are suitable for the most rigorous applications
Provides high conductivity and corrosion resistance to deliver reliable, superior performance
One supplier for all your terminal requirements, delivers lower procurement costs by
consolidating with one supplier
Te c h n i c a l I n f o r m a t i o n – Te r m i n a l s a n d F e r r u l e s
Vinyl
Nylon
DISCO-LOK ™
Non-Insulated Insulated
Insulated
Disconnects
Terminals/
Terminals/
Terminals/
Nylon
Butt Splices Butt Splices Butt Splices
Insulated
Material
SUPRA-GRIP ™
Disconnects
Vinyl
Nylon
Nylon
Non-Insulated Insulated
Insulated
Insulated
Disconnects Disconnects Disconnects
Copper/
Tin-Plated
Copper/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Polypropylene
Voltage (V)
Per UL Test Std.
2000 V
600 V
600 V
300 V
600 V
600 V
600 V
300 V
N/A
Temperature
Rating
150°C*
105°C
105°C
105°C
105°C
150°C
105°C
105°C
Barrel
Insulated
125°C Fully
Insulated
105°C
Flammability
ABS
05-HS112167W-PDA
—
Compliant
UL 94V-0
Compliant
—
Compliant
UL 94V-0
Compliant
UL 94V-2/HB
—
UL V2
—
Military
Specifications
MS25036, MS20659
Ring
Terminals
Compliant
—
—
—
—
—
For the full line of terminals and ferrules refer to www.panduit.com.
Color-coded CD-720 crimping dies, carrying/storage case, and controlled cycle
mechanism must be purchased separately.
CT-720
CD-720PV8-2
To ensure a high quality crimp you need the right terminal, the right tool and the right technique.
For information on how to qualify for crimp training contact your local PANDUIT Sales Representative.
Specifications:
Output: 6 tons
Weight: 7.7 lbs.
Length: 26"
Handle span: 58" (open), 2.5" (closed)
Warranty: 90 days
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico
[email protected]
Phone: 52.333.777.6000
CC-720
Optional controlled cycle mechanism only. Total weight of tool with
CC-720 is 8.25 lbs.
1
C-720
Black steel carrying case for CT-720 crimping tool.
1
For more information
1
Visit us at www.panduit.com
CD-720PV8-2* Crimp die insert used with CT-720 to crimp #8 – 2 AWG vinyl insulated terminals
*Other crimp die insert available for use with larger wires, see www.panduit.com for complete selection.
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty
Contact Customer Service by email: [email protected]
or by phone: 800-777-3300 and reference TMCB04
©2009 PANDUIT Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
Product Bulletin Number SA-TMCB05
Replaces WW-TMCB04
5/2009
Ferrules
Copper/
Tin-Plated
UL 94V-2/HB UL 94V-2/HB UL 94V-2/HB
Compliant
—
—
Ring
Terminals
Compliant
—
—
Applicable sizes of terminals, disconnects and butt splices are UL Listed and CSA Certified.
All terminals, disconnects, butt splices and ferrules are RoHS compliant.
KYNAR** insulated terminals are radiation resistance IEEE Class 1, with a temperature rating of 150°C.
*Nickel plated non-insulated terminals are rated up to 343°C.
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
w w w. p a n d u i t . c o m
B a t t e r y P o w e r e d H y d r a u l i c , 4 To n , C r i m p i n g To o l – C T- 2 6 0 0
Part
Number
Description
B a t t e r y P o w e r e d C r i m p i n g To o l C T- 2 5 0 0
Std.
Pkg.
Qty.
Part
Number
Crimping Tools
Battery Powered
Hydraulic Crimping
Tool CT-2600
Battery Powered
Crimping Tool
CT-2500
Key Features
Semiautomatic Ferrule
Crimping Tool
CT-1000
CONTOUR CRIMP ™
Controlled Cycle
Crimping Tools
Delivers quick termination of #8 – 2 AWG large wire insulated and non-insulated ring
terminals for improved jobsite flexibility
Compact, portable, and lightweight (3.8 lbs.*)
Allows simple one-hand crimp capability for enhanced productivity and efficiency
4-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
Retractable slide button
Allows ram to retract in mid-cycle for manual adjustment of terminal for enhanced efficiency
Automatic retracting ram
Ram retracts automatically to signal when crimp is complete for maximum reliability
Snap in crimp die holder
Provides quick change of PANDUIT interchangeable crimp dies without the use of tools for
increase productivity and cost efficiency
Rotating crimp head design
Allows 360° rotation for access in confined areas for maximum application flexibility
Delivers rapid termination of #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices
Compact, portable and lightweight (3.3 lbs.**)
Offers maximum productivity and ease of use in continuous workflow operations
2-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
CD-2600-PV8
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500 includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included Crimp head part numbers
listed below. Meets U.S. voltage requirements.
1
CT-2600/E
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600/E includes: Tool with crimp head, two battery cartridges,
battery charger and molded carrying case. Crimp dies not included. Crimp
die part number listed below. Meets European voltage requirements.
1
CT-2500/E
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500/E includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included. Crimp head part numbers
listed below. Meets European voltage requirements.
1
CT-2500
150 crimps per battery charge for increased efficiency and reduced downtime
Innovative rapid load design
Allows continuously molded ferrules to load conveniently into the handle of tool,
significantly reducing installation time
Multi-use .54 lbs controlled cycle tool
Delivers maximum efficiency with fewer tools required; cuts, strips, and crimps wire
Three position adjustable die setting
Provides quick termination of all PANDUIT #20 – 14 AWG continuously molded ferrules
with a single tool for increased productivity
CT-2500CHR
Used with CT-2600 to install PANDUIT P8 and P8-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CT-2500CH
CD-2600-P6
Used with CT-2600 to install PANDUIT P6 and P6-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
Die Inserts for Use with CT-2500CH Crimp Head Frame
CD-2600-P4
Used with CT-2600 to install PANDUIT P4 and P4-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-P2
Used with CT-2600 to install PANDUIT P2 and P2-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-PV8
Used with CT-2600 to install PANDUIT PV8 and PK8 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV6
Used with CT-2600 to install PANDUIT PV6 and PK6 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV4
Used with CT-2600 to install PANDUIT PV4 and PK4 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV2
Used with CT-2600 to install PANDUIT PV2 and PK2 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
Crimping is accomplished with significantly lower handle effort for increased efficiency,
higher production volumes, and minimized repetitive stress injuries
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
Controlled cycle mechanism
Provides a consistent crimp regardless of operator expertise, strength, or fatigue level
assuring high quality consistent terminations
CT-2600BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2600.
1
Ensures proper location of terminal in crimp pocket every time reducing the chance of
operator error
CT-2550CH
CT-2600BC
Crimp head frame to be used with die inserts CD-525, CD-550
or CD-570 (sold separately).
1
CD-525
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG fully insulated disconnects and insulated parallel splices.
1
CD-550
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG insulated terminals, disconnects, and splices.
1
CD-570
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG non-insulated terminals, disconnects, and splices.
1
CT-2500 Crimp Heads with Dies Attached
CT-2500CHR
Accessories
CONTOUR CRIMP ™ Controlled Cycle Crimping Tools
Ergonomic tool design
CT-2500 Crimp Head Frame Without Die Inserts
CD-2600-P8
Allows termination of all PANDUIT #22 – 10 AWG terminals, disconnects and splices for
jobsite flexibility in a variety of applications
Semiautomatic Ferrule Crimping Tool – CT-1000
Multi-position locator
CT-2500
Crimp Die Inserts
Battery powered tool design
Long battery life (rechargeable)
1
CT-2600
Battery Powered, 2 Ton, Crimping Tool – CT-2500
Interchangeable crimp heads
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W –
with battery (298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600 includes: Tool with crimp head, two battery cartridges, battery
charger and molded carrying case. Crimp dies not included. Crimp die
part number listed below. Meets U.S. voltage requirements.
Benefits
Battery powered hydraulic design
Crimping Tools
CT-2600
Plier Type
Crimping Tools
Battery Powered Hydraulic, 4 Ton, Crimping Tool – CT-2600
Description
Std.
Pkg.
Qty.
CT-2550CH
Crimps PANDUIT #22 – 10 AWG insulated terminals, disconnects,
and splices.
1
CT-2525CH
Crimps PANDUIT #22 – 10 AWG fully insulated disconnects and
insulated parallel splices.
1
CT-2570CH
Crimps PANDUIT #22 – 10 AWG non-insulated terminals, disconnects,
and splices.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2500.
1
CT-2500CASE
Carrying case holds CT-2500 and accessories.
1
Accessories
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
CT-2500BC
Hand Operated Plier Type Crimping Tools
All steel construction
Durable and reliable in low volume applications providing a cost effective termination solution
Plastic coated handles
Separates operator from steel construction of tool for comfort and safety
Multi-function
Tool cuts, strips, and crimps wire resulting in fewer required tools
*Weight of tool with battery, crimp head not included.
** Weight of tool with battery, crimp die not included.
S e m i a u t o m a t i c F e r r u l e C r i m p i n g To o l - C T- 1 0 0 0
Part
Number
CT-1000
Description
Crimps PANDUIT #20 – 14 AWG continuously molded ferrules on
strips. Also cuts and strips wire.
Std.
Pkg.
Qty.
1
B a t t e r y P o w e r e d H y d r a u l i c , 4 To n , C r i m p i n g To o l – C T- 2 6 0 0
Part
Number
Description
B a t t e r y P o w e r e d C r i m p i n g To o l C T- 2 5 0 0
Std.
Pkg.
Qty.
Part
Number
Crimping Tools
Battery Powered
Hydraulic Crimping
Tool CT-2600
Battery Powered
Crimping Tool
CT-2500
Key Features
Semiautomatic Ferrule
Crimping Tool
CT-1000
CONTOUR CRIMP ™
Controlled Cycle
Crimping Tools
Delivers quick termination of #8 – 2 AWG large wire insulated and non-insulated ring
terminals for improved jobsite flexibility
Compact, portable, and lightweight (3.8 lbs.*)
Allows simple one-hand crimp capability for enhanced productivity and efficiency
4-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
Retractable slide button
Allows ram to retract in mid-cycle for manual adjustment of terminal for enhanced efficiency
Automatic retracting ram
Ram retracts automatically to signal when crimp is complete for maximum reliability
Snap in crimp die holder
Provides quick change of PANDUIT interchangeable crimp dies without the use of tools for
increase productivity and cost efficiency
Rotating crimp head design
Allows 360° rotation for access in confined areas for maximum application flexibility
Delivers rapid termination of #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices
Compact, portable and lightweight (3.3 lbs.**)
Offers maximum productivity and ease of use in continuous workflow operations
2-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
CD-2600-PV8
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500 includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included Crimp head part numbers
listed below. Meets U.S. voltage requirements.
1
CT-2600/E
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600/E includes: Tool with crimp head, two battery cartridges,
battery charger and molded carrying case. Crimp dies not included. Crimp
die part number listed below. Meets European voltage requirements.
1
CT-2500/E
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500/E includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included. Crimp head part numbers
listed below. Meets European voltage requirements.
1
CT-2500
150 crimps per battery charge for increased efficiency and reduced downtime
Innovative rapid load design
Allows continuously molded ferrules to load conveniently into the handle of tool,
significantly reducing installation time
Multi-use .54 lbs controlled cycle tool
Delivers maximum efficiency with fewer tools required; cuts, strips, and crimps wire
Three position adjustable die setting
Provides quick termination of all PANDUIT #20 – 14 AWG continuously molded ferrules
with a single tool for increased productivity
CT-2500CHR
Used with CT-2600 to install PANDUIT P8 and P8-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CT-2500CH
CD-2600-P6
Used with CT-2600 to install PANDUIT P6 and P6-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
Die Inserts for Use with CT-2500CH Crimp Head Frame
CD-2600-P4
Used with CT-2600 to install PANDUIT P4 and P4-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-P2
Used with CT-2600 to install PANDUIT P2 and P2-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-PV8
Used with CT-2600 to install PANDUIT PV8 and PK8 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV6
Used with CT-2600 to install PANDUIT PV6 and PK6 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV4
Used with CT-2600 to install PANDUIT PV4 and PK4 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV2
Used with CT-2600 to install PANDUIT PV2 and PK2 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
Crimping is accomplished with significantly lower handle effort for increased efficiency,
higher production volumes, and minimized repetitive stress injuries
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
Controlled cycle mechanism
Provides a consistent crimp regardless of operator expertise, strength, or fatigue level
assuring high quality consistent terminations
CT-2500BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2500
and CT-2600.
1
Ensures proper location of terminal in crimp pocket every time reducing the chance of
operator error
CT-2550CH
CT-2500BC
Crimp head frame to be used with die inserts CD-525, CD-550
or CD-570 (sold separately).
1
CD-525
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG fully insulated disconnects and insulated parallel splices.
1
CD-550
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG insulated terminals, disconnects, and splices.
1
CD-570
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG non-insulated terminals, disconnects, and splices.
1
CT-2500 Crimp Heads with Dies Attached
CT-2500CHR
Accessories
CONTOUR CRIMP ™ Controlled Cycle Crimping Tools
Ergonomic tool design
CT-2500 Crimp Head Frame Without Die Inserts
CD-2600-P8
Allows termination of all PANDUIT #22 – 10 AWG terminals, disconnects and splices for
jobsite flexibility in a variety of applications
Semiautomatic Ferrule Crimping Tool – CT-1000
Multi-position locator
CT-2500
Crimp Die Inserts
Battery powered tool design
Long battery life (rechargeable)
1
CT-2600
Battery Powered, 2 Ton, Crimping Tool – CT-2500
Interchangeable crimp heads
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W –
with battery (298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600 includes: Tool with crimp head, two battery cartridges, battery
charger and molded carrying case. Crimp dies not included. Crimp die
part number listed below. Meets U.S. voltage requirements.
Benefits
Battery powered hydraulic design
Crimping Tools
CT-2600
Plier Type
Crimping Tools
Battery Powered Hydraulic, 4 Ton, Crimping Tool – CT-2600
Description
Std.
Pkg.
Qty.
CT-2550CH
Crimps PANDUIT #22 – 10 AWG insulated terminals, disconnects,
and splices.
1
CT-2525CH
Crimps PANDUIT #22 – 10 AWG fully insulated disconnects and
insulated parallel splices.
1
CT-2570CH
Crimps PANDUIT #22 – 10 AWG non-insulated terminals, disconnects,
and splices.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2500.
1
CT-2500CASE
Carrying case holds CT-2500 and accessories.
1
Accessories
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
CT-2500BC
Hand Operated Plier Type Crimping Tools
All steel construction
Durable and reliable in low volume applications providing a cost effective termination solution
Plastic coated handles
Separates operator from steel construction of tool for comfort and safety
Multi-function
Tool cuts, strips, and crimps wire resulting in fewer required tools
*Weight of tool with battery, crimp head not included.
** Weight of tool with battery, crimp die not included.
S e m i a u t o m a t i c F e r r u l e C r i m p i n g To o l - C T- 1 0 0 0
Part
Number
CT-1000
Description
Crimps PANDUIT #20 – 14 AWG continuously molded ferrules on
strips. Also cuts and strips wire.
Std.
Pkg.
Qty.
1
B a t t e r y P o w e r e d H y d r a u l i c , 4 To n , C r i m p i n g To o l – C T- 2 6 0 0
Part
Number
Description
B a t t e r y P o w e r e d C r i m p i n g To o l C T- 2 5 0 0
Std.
Pkg.
Qty.
Part
Number
Crimping Tools
Battery Powered
Hydraulic Crimping
Tool CT-2600
Battery Powered
Crimping Tool
CT-2500
Key Features
Semiautomatic Ferrule
Crimping Tool
CT-1000
CONTOUR CRIMP ™
Controlled Cycle
Crimping Tools
Delivers quick termination of #8 – 2 AWG large wire insulated and non-insulated ring
terminals for improved jobsite flexibility
Compact, portable, and lightweight (3.8 lbs.*)
Allows simple one-hand crimp capability for enhanced productivity and efficiency
4-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
Retractable slide button
Allows ram to retract in mid-cycle for manual adjustment of terminal for enhanced efficiency
Automatic retracting ram
Ram retracts automatically to signal when crimp is complete for maximum reliability
Snap in crimp die holder
Provides quick change of PANDUIT interchangeable crimp dies without the use of tools for
increase productivity and cost efficiency
Rotating crimp head design
Allows 360° rotation for access in confined areas for maximum application flexibility
Delivers rapid termination of #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices
Compact, portable and lightweight (3.3 lbs.**)
Offers maximum productivity and ease of use in continuous workflow operations
2-second cycle time
Results in less time to crimp terminals compared to conventional methods for increased
productivity, improved efficiency, and lower installed costs
CD-2600-PV8
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500 includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included Crimp head part numbers
listed below. Meets U.S. voltage requirements.
1
CT-2600/E
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600/E includes: Tool with crimp head, two battery cartridges,
battery charger and molded carrying case. Crimp dies not included. Crimp
die part number listed below. Meets European voltage requirements.
1
CT-2500/E
Crimps PANDUIT #22 – 10 AWG insulated and non-insulated terminals,
disconnects, and splices.
Specifications: Crimping force 1.7 tons (15kN)
Weight 3.3 lbs.(1,5kg)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W – with battery
(298mm x 60mm x 80mm)
Crimp cycle time = 2 seconds
CT-2500/E includes: Tool, two battery cartridges, battery charger and
carrying case. Crimp heads not included. Crimp head part numbers
listed below. Meets European voltage requirements.
1
CT-2500
150 crimps per battery charge for increased efficiency and reduced downtime
Innovative rapid load design
Allows continuously molded ferrules to load conveniently into the handle of tool,
significantly reducing installation time
Multi-use .54 lbs controlled cycle tool
Delivers maximum efficiency with fewer tools required; cuts, strips, and crimps wire
Three position adjustable die setting
Provides quick termination of all PANDUIT #20 – 14 AWG continuously molded ferrules
with a single tool for increased productivity
CT-2500CHR
Used with CT-2600 to install PANDUIT P8 and P8-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CT-2500CH
CD-2600-P6
Used with CT-2600 to install PANDUIT P6 and P6-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
Die Inserts for Use with CT-2500CH Crimp Head Frame
CD-2600-P4
Used with CT-2600 to install PANDUIT P4 and P4-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-P2
Used with CT-2600 to install PANDUIT P2 and P2-HT6 series large
wire, high temperature, non-insulated ring terminals.
1
CD-2600-PV8
Used with CT-2600 to install PANDUIT PV8 and PK8 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV6
Used with CT-2600 to install PANDUIT PV6 and PK6 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV4
Used with CT-2600 to install PANDUIT PV4 and PK4 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CD-2600-PV2
Used with CT-2600 to install PANDUIT PV2 and PK2 series large wire,
vinyl and KYNAR** insulated ring terminals.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
Crimping is accomplished with significantly lower handle effort for increased efficiency,
higher production volumes, and minimized repetitive stress injuries
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
Controlled cycle mechanism
Provides a consistent crimp regardless of operator expertise, strength, or fatigue level
assuring high quality consistent terminations
CT-2600BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2600.
1
Ensures proper location of terminal in crimp pocket every time reducing the chance of
operator error
CT-2550CH
CT-2600BC
Crimp head frame to be used with die inserts CD-525, CD-550
or CD-570 (sold separately).
1
CD-525
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG fully insulated disconnects and insulated parallel splices.
1
CD-550
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG insulated terminals, disconnects, and splices.
1
CD-570
Die insert used with CT-2500CH (sold separately) to crimp PANDUIT
#22 – 10 AWG non-insulated terminals, disconnects, and splices.
1
CT-2500 Crimp Heads with Dies Attached
CT-2500CHR
Accessories
CONTOUR CRIMP ™ Controlled Cycle Crimping Tools
Ergonomic tool design
CT-2500 Crimp Head Frame Without Die Inserts
CD-2600-P8
Allows termination of all PANDUIT #22 – 10 AWG terminals, disconnects and splices for
jobsite flexibility in a variety of applications
Semiautomatic Ferrule Crimping Tool – CT-1000
Multi-position locator
CT-2500
Crimp Die Inserts
Battery powered tool design
Long battery life (rechargeable)
1
CT-2600
Battery Powered, 2 Ton, Crimping Tool – CT-2500
Interchangeable crimp heads
Crimps PANDUIT tin and nickel plated #8 – 2 AWG high temperature
large wire, non-insulated, vinyl and KYNAR** insulated ring terminals.
Specifications: Crimping force – 4 tons (35kN)
Dimensions: 11 3/4"L x 2 3/8"H x 3 1/8"W –
with battery (298mm x 60mm x 80mm)
Weight 3.5 lbs. with battery; crimp head not included
Crimp cycle time = 4 seconds
CT-2600 includes: Tool with crimp head, two battery cartridges, battery
charger and molded carrying case. Crimp dies not included. Crimp die
part number listed below. Meets U.S. voltage requirements.
Benefits
Battery powered hydraulic design
Crimping Tools
CT-2600
Plier Type
Crimping Tools
Battery Powered Hydraulic, 4 Ton, Crimping Tool – CT-2600
Description
Std.
Pkg.
Qty.
CT-2550CH
Crimps PANDUIT #22 – 10 AWG insulated terminals, disconnects,
and splices.
1
CT-2525CH
Crimps PANDUIT #22 – 10 AWG fully insulated disconnects and
insulated parallel splices.
1
CT-2570CH
Crimps PANDUIT #22 – 10 AWG non-insulated terminals, disconnects,
and splices.
1
CT-2500CHR
U.S. compatible battery charger (100 – 120 V, 60W 60Hz) for use with
the CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500CHR/E
European compatible battery charger (220 V, 50 Hz) for use with the
CT-2500 and CT-2600; battery charge time 1 hour.
1
CT-2500BC
Rechargeable tool battery (9.6 volt Ni-Cad) for use with the CT-2500.
1
CT-2500CASE
Carrying case holds CT-2500 and accessories.
1
Accessories
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
CT-2500BC
Hand Operated Plier Type Crimping Tools
All steel construction
Durable and reliable in low volume applications providing a cost effective termination solution
Plastic coated handles
Separates operator from steel construction of tool for comfort and safety
Multi-function
Tool cuts, strips, and crimps wire resulting in fewer required tools
*Weight of tool with battery, crimp head not included.
** Weight of tool with battery, crimp die not included.
S e m i a u t o m a t i c F e r r u l e C r i m p i n g To o l - C T- 1 0 0 0
Part
Number
CT-1000
Description
Crimps PANDUIT #20 – 14 AWG continuously molded ferrules on
strips. Also cuts and strips wire.
Std.
Pkg.
Qty.
1
CONTOUR CRIMP
™
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Part
Number
CT-1525
CT-1550
C o n t r o l l e d C y c l e C r i m p i n g To o l s – F e r r u l e E n d s S l e e v e s
Std.
Pkg.
Qty.
Description
Crimps PANDUIT #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG fully
insulated disconnects and insulated parallel splices. Crimps PANDUIT #22 – 14 AWG
barrel insulated disconnects.
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1550 has the red/blue pocket closest to the pivot, which
provides a reduced crimp effort for those who make red/blue terminations.
1
Crimps PANDUIT #8 – 2 AWG non-insulated tubular terminals (S series) and
copper flexible lugs (does not include LCAF, LCCF and SCSF connectors),
#8 – #1 AWG copper code conductor lugs and splices, #6 – #4 AWG dual rated
aluminum lugs, splices and copper code conductor for CTAPF10-16 to
CTAPF3-12 copper taps. Includes 5-position, color-coded rotating die.
1
CT-1701
Crimps PANDUIT #10 – 2 AWG non-insulated large gauge ring terminal
(P series). Crimps #12 – 4 AWG copper lugs and splices. Includes 5-position
rotating die.
1
CT-1014
Crimps PANDUIT #22 – 14 AWG loose piece DISCO-LOK ™ Disconnects.
1
CT-1015
Crimps PANDUIT #22 – 14 AWG loose piece SUPRA-GRIP Disconnects.
1
CT-1550
CT-1570
CT-1700
™
1
CT-1003
CT-1123
Description
1
Crimps PANDUIT #22 – 8 AWG single wire insulated ferrules (DIN).
#22 – 8 AWG single wire insulated ferrules (French).
#22 – 10 AWG insulated dual-wire (DIN) ferrules.
#22 – 10 AWG non-insulated ferrules.
1
CT-1004
Crimps PANDUIT #8 – 6 AWG single wire insulated ferrules (DIN).
#8 – 6 AWG single wire insulated ferrules (French).
#10 AWG insulated dual-wire (DIN) ferrule.
#8 – #6 AWG non-insulated ferrules.
1
CT-1005
Crimps PANDUIT #4 – #2 AWG single wire insulated ferrules (DIN).
#4 – #2 AWG single wire insulated ferrules (French).
#4 – #2 AWG non-insulated ferrules.
1
CT-1006
Crimps PANDUIT #1 AWG single wire insulated ferrules (DIN) and (French)
#1 AWG non-insulated ferrules.
1
CT-1104
Controlled cycle square crimp profile tool for #8 – 6 AWG (10 – 16mm²)
insulated and non-insulated ferrules.
1
CT-1123
Controlled cycle square crimp profile tool for #26 – 8 AWG (.14 – 10mm²)
insulated and non-insulated ferrules.
1
CT-1003
1
Std.
Pkg.
Qty.
Crimps PANDUIT #26 – 10 AWG single wire insulated ferrules (DIN).
#26 – 10 AWG single wire insulated ferrules (French).
#22 – 12 AWG insulated dual-wire (DIN) ferrules.
#24 – 10 AWG non-insulated ferrules.
1
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1551 has the yellow pocket closest to the pivot, which
provides a reduced crimp effort for those who make yellow terminations.
Crimps most PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated terminals
and disconnects. Crimps PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated
splices, and #10 AWG compression lugs.
CT-1551
Part
Number
CT-1002
Part
Number
CT-300-1
CT-310
Description
Crimps PANDUIT #22 – 14 AWG fully insulated right angle disconnects.
(DNFR-FIB series).
1
Crimps PANDUIT #22 – 10 AWG heat shrink insulated terminals, disconnects,
and splices.
1
H a n d O p e r a t e d P l i e r Ty p e C r i m p i n g To o l s
Part
Number
CT-100A
CT-300-1
Part
Number
CT-720
Description
Provides manual UL Listed terminations of PANDUIT ® PAN-TERM ® #8 – 2 AWG Vinyl
Insulated Terminals. Manual crimping tool for UL Listed or Recognized and CSA
Certified terminations of PANDUIT ® PAN-LUG ™ Copper Compression Lugs and Splices
for #8 AWG – 500 kcmil copper code conductor and aluminum compression lugs and
splices for #6 AWG – 350 kcmil copper and aluminum code conductors.
Std.
Pkg.
Qty.
1
CT-100A
Std.
Pkg.
Qty.
Description
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips wire.
Excellent all-around application tool of heat treated finished steel with comfortable
cushioned plastic grip handles.
1
CT-160
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts three U.S. and three metric screw sizes. Cuts and
strips wire. Has insulation closure pocket.
1
CT-260
Forged steel tool. Crimps PANDUIT #22 – 10 AWG insulated and non-insulated
terminals. Cuts wire.
Forged steel tool. Crimps most PANDUIT #22 – 10 AWG non-insulated terminals,
disconnects, and splices. Cuts wire.
1
1
D i e Ty p e , M a n u a l C r i m p i n g To o l
CT-200
PAN-TERM ® Terminals, Ferrules, and Crimping Tools combine
to deliver the highest quality terminations at the lowest installed
cost. Offering the highest documented performance in the
industry, PANDUIT terminals are UL Listed and Recognized,
CSA Certified, Nuclear Certified, ABS (American Bureau of
Shipping) Approved and meet applicable military specifications.
PANDUIT crimping tools are designed to increase productivity
and minimize repetitive stress injuries delivering consistent
terminations for maximum reliability throughout the
physical infrastructure.
Key Features
Benefits
PAN-TERM ® Terminals and Ferrules
Performance exceeds
UL and CSA requirements
Manufactured with electrolytically
refined copper and tin-plated
Comprehensive selection of terminals
and ferrules
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Std.
Pkg.
Qty.
PAN-TERM ® Terminals, Ferrules,
and Crimping Tools
Provides assurance that terminals are suitable for the most rigorous applications
Provides high conductivity and corrosion resistance to deliver reliable, superior performance
One supplier for all your terminal requirements, delivers lower procurement costs by
consolidating with one supplier
Te c h n i c a l I n f o r m a t i o n – Te r m i n a l s a n d F e r r u l e s
Vinyl
Nylon
DISCO-LOK ™
Non-Insulated Insulated
Insulated
Disconnects
Terminals/
Terminals/
Terminals/
Nylon
Butt Splices Butt Splices Butt Splices
Insulated
Material
SUPRA-GRIP ™
Disconnects
Vinyl
Nylon
Nylon
Non-Insulated Insulated
Insulated
Insulated
Disconnects Disconnects Disconnects
Copper/
Tin-Plated
Copper/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Polypropylene
Voltage (V)
Per UL Test Std.
2000 V
600 V
600 V
300 V
600 V
600 V
600 V
300 V
N/A
Temperature
Rating
150°C*
105°C
105°C
105°C
105°C
150°C
105°C
105°C
Barrel
Insulated
125°C Fully
Insulated
105°C
Flammability
ABS
05-HS112167W-PDA
—
Compliant
UL 94V-0
Compliant
—
Compliant
UL 94V-0
Compliant
UL 94V-2/HB
—
UL V2
—
Military
Specifications
MS25036, MS20659
Ring
Terminals
Compliant
—
—
—
—
—
For the full line of terminals and ferrules refer to www.panduit.com.
Color-coded CD-720 crimping dies, carrying/storage case, and controlled cycle
mechanism must be purchased separately.
CT-720
CD-720PV8-2
To ensure a high quality crimp you need the right terminal, the right tool and the right technique.
For information on how to qualify for crimp training contact your local PANDUIT Sales Representative.
Specifications:
Output: 6 tons
Weight: 7.7 lbs.
Length: 26"
Handle span: 58" (open), 2.5" (closed)
Warranty: 90 days
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico
[email protected]
Phone: 52.333.777.6000
CC-720
Optional controlled cycle mechanism only. Total weight of tool with
CC-720 is 8.25 lbs.
1
C-720
Black steel carrying case for CT-720 crimping tool.
1
For more information
1
Visit us at www.panduit.com
CD-720PV8-2* Crimp die insert used with CT-720 to crimp #8 – 2 AWG vinyl insulated terminals
*Other crimp die insert available for use with larger wires, see www.panduit.com for complete selection.
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty
Contact Customer Service by email: [email protected]
or by phone: 800-777-3300 and reference TMCB04
©2009 PANDUIT Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
Product Bulletin Number SA-TMCB05
Replaces WW-TMCB04
5/2009
Ferrules
Copper/
Tin-Plated
UL 94V-2/HB UL 94V-2/HB UL 94V-2/HB
Compliant
—
—
Ring
Terminals
Compliant
—
—
Applicable sizes of terminals, disconnects and butt splices are UL Listed and CSA Certified.
All terminals, disconnects, butt splices and ferrules are RoHS compliant.
KYNAR** insulated terminals are radiation resistance IEEE Class 1, with a temperature rating of 150°C.
*Nickel plated non-insulated terminals are rated up to 343°C.
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
w w w. p a n d u i t . c o m
CONTOUR CRIMP
™
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Part
Number
CT-1525
C o n t r o l l e d C y c l e C r i m p i n g To o l s – F e r r u l e E n d s S l e e v e s
Std.
Pkg.
Qty.
Description
Crimps PANDUIT #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG fully
insulated disconnects and insulated parallel splices. Crimps PANDUIT #22 – 14 AWG
barrel insulated disconnects.
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1550 has the red/blue pocket closest to the pivot, which
provides a reduced crimp effort for those who make red/blue terminations.
1
Crimps most PANDUIT #22 – 10 AWG nylon and vinyl insulated terminals, splices
and disconnects. The CT-1551 has the yellow pocket closest to the pivot, which
provides a reduced crimp effort for those who make yellow terminations.
Crimps most PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated terminals
and disconnects. Crimps PANDUIT #22 – 10 AWG and .5 – 6.0mm2 non-insulated
splices, and #10 AWG compression lugs.
1
Crimps PANDUIT #8 – 2 AWG non-insulated tubular terminals (S series) and
copper flexible lugs (does not include LCAF, LCCF and SCSF connectors),
#8 – #1 AWG copper code conductor lugs and splices, #6 – #4 AWG dual rated
aluminum lugs, splices and copper code conductor for CTAPF10-16 to
CTAPF3-12 copper taps. Includes 5-position, color-coded rotating die.
1
CT-1701
Crimps PANDUIT #10 – 2 AWG non-insulated large gauge ring terminal
(P series). Crimps #12 – 4 AWG copper lugs and splices. Includes 5-position
rotating die.
1
CT-1014
Crimps PANDUIT #22 – 14 AWG loose piece DISCO-LOK ™ Disconnects.
1
CT-1015
Crimps PANDUIT #22 – 14 AWG loose piece SUPRA-GRIP Disconnects.
1
CT-1550
CT-1551
CT-1550
CT-1570
CT-1700
™
Part
Number
CT-1002
1
Crimps PANDUIT #22 – 8 AWG single wire insulated ferrules (DIN).
#22 – 8 AWG single wire insulated ferrules (French).
#22 – 10 AWG insulated dual-wire (DIN) ferrules.
#22 – 10 AWG non-insulated ferrules.
1
CT-1004
Crimps PANDUIT #8 – 6 AWG single wire insulated ferrules (DIN).
#8 – 6 AWG single wire insulated ferrules (French).
#10 AWG insulated dual-wire (DIN) ferrule.
#8 – #6 AWG non-insulated ferrules.
1
CT-1005
Crimps PANDUIT #4 – #2 AWG single wire insulated ferrules (DIN).
#4 – #2 AWG single wire insulated ferrules (French).
#4 – #2 AWG non-insulated ferrules.
1
CT-1006
Crimps PANDUIT #1 AWG single wire insulated ferrules (DIN) and (French)
#1 AWG non-insulated ferrules.
1
CT-1104
Controlled cycle square crimp profile tool for #8 – 6 AWG (10 – 16mm²)
insulated and non-insulated ferrules.
1
CT-1123
Controlled cycle square crimp profile tool for #26 – 8 AWG (.14 – 10mm²)
insulated and non-insulated ferrules.
1
CT-1003
CT-1003
CT-1123
Description
Crimps PANDUIT #26 – 10 AWG single wire insulated ferrules (DIN).
#26 – 10 AWG single wire insulated ferrules (French).
#22 – 12 AWG insulated dual-wire (DIN) ferrules.
#24 – 10 AWG non-insulated ferrules.
1
1
Std.
Pkg.
Qty.
Part
Number
CT-300-1
CT-310
Description
Crimps PANDUIT #22 – 14 AWG fully insulated right angle disconnects.
(DNFR-FIB series).
1
Crimps PANDUIT #22 – 10 AWG heat shrink insulated terminals, disconnects,
and splices.
1
H a n d O p e r a t e d P l i e r Ty p e C r i m p i n g To o l s
Part
Number
CT-100A
CT-300-1
Part
Number
CT-720
Description
Provides manual UL Listed terminations of PANDUIT ® PAN-TERM ® #8 – 2 AWG Vinyl
Insulated Terminals. Manual crimping tool for UL Listed or Recognized and CSA
Certified terminations of PANDUIT ® PAN-LUG ™ Copper Compression Lugs and Splices
for #8 AWG – 500 kcmil copper code conductor and aluminum compression lugs and
splices for #6 AWG – 350 kcmil copper and aluminum code conductors.
Std.
Pkg.
Qty.
1
CT-100A
Std.
Pkg.
Qty.
Description
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips wire.
Excellent all-around application tool of heat treated finished steel with comfortable
cushioned plastic grip handles.
1
CT-160
Crimps most PANDUIT #22 –10 AWG insulated and non-insulated terminals,
disconnects, and splices. Cuts three U.S. and three metric screw sizes. Cuts and
strips wire. Has insulation closure pocket.
1
CT-260
Forged steel tool. Crimps PANDUIT #22 – 10 AWG insulated and non-insulated
terminals. Cuts wire.
Forged steel tool. Crimps most PANDUIT #22 – 10 AWG non-insulated terminals,
disconnects, and splices. Cuts wire.
1
1
D i e Ty p e , M a n u a l C r i m p i n g To o l
CT-200
PAN-TERM ® Terminals, Ferrules, and Crimping Tools combine
to deliver the highest quality terminations at the lowest installed
cost. Offering the highest documented performance in the
industry, PANDUIT terminals are UL Listed and Recognized,
CSA Certified, Nuclear Certified, ABS (American Bureau of
Shipping) Approved and meet applicable military specifications.
PANDUIT crimping tools are designed to increase productivity
and minimize repetitive stress injuries delivering consistent
terminations for maximum reliability throughout the
physical infrastructure.
Key Features
Benefits
PAN-TERM ® Terminals and Ferrules
Performance exceeds
UL and CSA requirements
Manufactured with electrolytically
refined copper and tin-plated
Comprehensive selection of terminals
and ferrules
C o n t r o l l e d C y c l e C r i m p i n g To o l s
Std.
Pkg.
Qty.
PAN-TERM ® Terminals, Ferrules,
and Crimping Tools
Provides assurance that terminals are suitable for the most rigorous applications
Provides high conductivity and corrosion resistance to deliver reliable, superior performance
One supplier for all your terminal requirements, delivers lower procurement costs by
consolidating with one supplier
Te c h n i c a l I n f o r m a t i o n – Te r m i n a l s a n d F e r r u l e s
Vinyl
Nylon
DISCO-LOK ™
Non-Insulated Insulated
Insulated
Disconnects
Terminals/
Terminals/
Terminals/
Nylon
Butt Splices Butt Splices Butt Splices
Insulated
Material
SUPRA-GRIP ™
Disconnects
Vinyl
Nylon
Nylon
Non-Insulated Insulated
Insulated
Insulated
Disconnects Disconnects Disconnects
Copper/
Tin-Plated
Copper/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Brass/
Tin-Plated
Polypropylene
Voltage (V)
Per UL Test Std.
2000 V
600 V
600 V
300 V
600 V
600 V
600 V
300 V
N/A
Temperature
Rating
150°C*
105°C
105°C
105°C
105°C
150°C
105°C
105°C
Barrel
Insulated
125°C Fully
Insulated
105°C
Flammability
ABS
05-HS112167W-PDA
—
Compliant
UL 94V-0
Compliant
—
Compliant
UL 94V-0
Compliant
UL 94V-2/HB
—
UL V2
—
Military
Specifications
MS25036, MS20659
Ring
Terminals
Compliant
—
—
—
—
—
For the full line of terminals and ferrules refer to www.panduit.com.
Color-coded CD-720 crimping dies, carrying/storage case, and controlled cycle
mechanism must be purchased separately.
CT-720
CD-720PV8-2
To ensure a high quality crimp you need the right terminal, the right tool and the right technique.
For information on how to qualify for crimp training contact your local PANDUIT Sales Representative.
Specifications:
Output: 6 tons
Weight: 7.7 lbs.
Length: 26"
Handle span: 58" (open), 2.5" (closed)
Warranty: 90 days
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Jalisco, Mexico
[email protected]
Phone: 52.333.777.6000
CC-720
Optional controlled cycle mechanism only. Total weight of tool with
CC-720 is 8.25 lbs.
1
C-720
Black steel carrying case for CT-720 crimping tool.
1
For more information
1
Visit us at www.panduit.com
CD-720PV8-2* Crimp die insert used with CT-720 to crimp #8 – 2 AWG vinyl insulated terminals
*Other crimp die insert available for use with larger wires, see www.panduit.com for complete selection.
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of PANDUIT product warranties, log on to www.panduit.com/warranty
Contact Customer Service by email: [email protected]
or by phone: 800-777-3300 and reference TMCB04
© 2009 PANDUIT Corp.
ALL RIGHTS RESERVED.
Printed in the U.S.A.
Product Bulletin Number WW-TMCB05
Replaces WW-TMCB04
5/2009
Ferrules
Copper/
Tin-Plated
UL 94V-2/HB UL 94V-2/HB UL 94V-2/HB
Compliant
—
—
Ring
Terminals
Compliant
—
—
Applicable sizes of terminals, disconnects and butt splices are UL Listed and CSA Certified.
All terminals, disconnects, butt splices and ferrules are RoHS compliant.
KYNAR** insulated terminals are radiation resistance IEEE Class 1, with a temperature rating of 150°C.
*Nickel plated non-insulated terminals are rated up to 343°C.
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
w w w. p a n d u i t . c o m