MATERIAL DECLARATION SHEET Material Number CM322522 SERIES Product Line Wound Chip Inductor Compliance Date RoHS Compliant No. Construction Element (subpart) 1-1-2005 YES MSL Homogeneous Material Material weight [g] 1 Core Ferrite Ni-‐Zn Series 0.026 2 Wire P180 0.011 3 Terminal Lead 0.004 4 Adhesive S-‐F1-‐610W 0.001 5 Molding Compound 1100RG 0.007 6 Solder 100H Total weight 0.001 0.05 3 Homogeneous Material\ Substances Iron oxide Nickel oxide Zinc oxide Copper oxide Copper Polyester Resin Copper Tin Poly[(phenyl glycidyl ether)-‐co-‐formaldehyde] 2-‐Methylimidazole Carbon black Silicon dioxide Silica Antimony trioxide Epoxy Resin Phenol-‐Formaldehyde Resin Brominated epoxy resin Carbon black Tin if applicable Materials Mass % Material Mass % of total unit wt. 1309-‐37-‐1 1313-‐99-‐1 1314-‐13-‐2 1317-‐38-‐0 7440-‐50-‐8 9009-‐54-‐5 7440-‐50-‐8 7440-‐31-‐5 63 12 18 7 95 5 95 5 32.76 6.24 9.36 3.64 20.9 1.1 7.6 0.4 28064-‐14-‐4 69.1 1.382 693-‐98-‐1 1333-‐86-‐4 7631-‐86-‐9 14808-‐60-‐7 1309-‐64-‐4 29690-‐82-‐2 9003-‐35-‐4 40039-‐93-‐8 1333-‐86-‐4 7440-‐31-‐5 6.5 4.2 20.2 69 2.5 15 10 2.5 1 100 0.13 0.084 0.404 9.66 0.35 2.1 1.4 0.35 0.14 2 CASRN Subpart mass of total wt. (%) 52 22 8 2 14 2 Document was updated on: 2014/03/04 Headquarters Riverside CA www.bourns.com CASRN: CAS Registry Number® is a Registered Trademark of the American Chemical Society page 1 of 1