Document 776-1 Dual Inductors for Class D • Dual inductors for use in Class D output filters • Shielded package contains both coils • Very low magnetic coupling • AEC-Q200 Grade 1 qualified • SMT (HA4158-BL) and through-hole (JA4575-AL) versions • Designed for low distortion and the best sound quality Core material Ferrite Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Weight 5.0 g Coplanarity (HA4158-BL) 0.004 in / 0,10 mm Ambient temperature –40°C to +125°C with Irms current, +125°C to +165°C with derated current Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Maximum power (W)2 Inductance3 Part 2 Ohm 4 Ohm number1 load load ±10% (µH) HA4158-BL_ JA4575-AL_ 48 48 68 68 10.0 10.0 (Ohms) 0.013 0.013 1. When ordering, please specify packaging code: HA4158-BLD Packaging:D =13″ machine-ready reel. EIA-481 embossed plastic tape. B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Maximum power into specified load that causes less than a 40°C temperature rise. Measured at 1 kHz with a 14.4 Vdc supply for the 2-Ohm load and a 21 Vdc supply for the 4-Ohm load. Refer to Output Power table for typical output conditions. Tested using the TAS5414A Evaluation Board from Texas Instruments. 3. Inductance measured at 100 kHz, 1.0 Vrms, 0 Adc using an Agilent/ HP 4284A impedance analyzer. 4. DCR is for each winding, measured on a micro-ohmmeter. 5. SRF measured using Agilent/HP 8753D network analyzer. 6. Total harmonic distortion + noise measured at 20 W into a 2‑Ohm or 4‑Ohm load at 1 kHz with a 21 Vdc supply. 7. DC current (typical) at which the inductance drops the specified amount from its value without current. 8. Current applied to windings connected in series that causes the specified temperature rise from 25°C ambient. 9. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms (A) SRF Isat (A) THD+N6 10%20%30% 20°C 40°C (MHz) (%) dropdropdrop rise rise DCR max4 7 8 typ5 21.5 <0.1 21.5 <0.1 6.0 6.77.1 6.0 6.77.1 4.0 6.0 4.0 6.0 Output Power Temperature Power rise from 25°C typ (W) (°C) Load THD+N Test condition 22 26 10.0 10.2 4 Ohm 4 Ohm 1% 10% 1 kHz, 14.4 Vdc 1 kHz, 14.4 Vdc 46 56 21.8 22.8 4 Ohm 4 Ohm 1% 10% 1 kHz, 21 Vdc 1 kHz, 21 Vdc 36 44 27.8 25.1 2 Ohm 2 Ohm 1% 10% 1 kHz, 14.4 Vdc 1 kHz, 14.4 Vdc US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 776-1 Revised 12/16/11 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 776-2 Class D Dual Inductors L vs Current HA4158-BL (SMT version) XXXXY HA4158-BL 1 4 1 8 0.423 max 10,75 Parts manufactured prior to December 2011 may be marked differently. 5 4 8 0.466 max 11,84 5 0.419 max 10,65 0.125 ±0.003 3,175 ±0,076 0.026 ±0.003 0,66 ±0,076 Recommended Land Pattern 0.004 /0,10 with a 0.006 inch / 0.1524 mm solder screen thickness 0.235 5,97 5 4 1 ESR vs Frequency 0.265 6,75 1 0.047 1,19 0.265 6,75 8 Dimensions are in 0.145 3,68 inches mm Packaging 400/13″ reel Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 10.8 mm pocket depth JA4575-AL (Through-hole version) XXXXY 4 JA4575-AL 1 1 8 0.423 max 10,75 Parts manufactured prior to December 2011 may be marked differently. 5 0.466 max 11,84 Current Derating 0.110 ±0.01 2,80 ±0,254 100 90 0.325 ±0.008 8,26 ±0,20 80 60 4 50 Recommended PC Board Layout 0.0244 0,620 70 0.325 8,26 5 1 0.264 ±0.008 6,71 ±0,2 40 30 20 25°C Percent of rated current 5 0.390 max 9,91 120 110 10 0 4 8 Isat Irms -40 -20 0 1 Dimensions are in 20 40 60 80 100 120 Ambient temperature (°C) 140 160 180 8 0.264 6,71 0.043 1,10 inches mm Packaging 250/13″ reel Plastic tape: 24 mm wide, 0.5 mm thick, 20 mm pocket spacing, 13.84 mm pocket depth US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 776-2 Revised 12/16/11 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.