MATERIAL DECLARATION SHEET Material SRP1045 Series Product Line SHIELDED SMD POWER INDUCTOR Date 11-October-2005 No. Construction element 1 Core Material group Ferrite Mn-Zn Series Material Weight [g] 0.91 if applicable Average mass [%] Sum [%] Iron & Compounds 1345-25-1 Remainder 100 Zinc & Compounds 1314-13-2 19 Manganese & Compounds 7439-96-5 10 Copper & Compounds 4 100 100 100 Materials CAS 2 Base LCP 0.177 E4008 1317-38-0 NA 3 Wire Copper Wire 0.331 Copper(Cu) 7440-50-8 90.08~99.00 N/A 7440-31-5 N/A 1~9.92 100 100 100 4 Adhesive Epoxy 0.0242 Polyester Resin Tin (Sn) Epoxy resin 5 Clip electroplate 0.013 Copper(Cu) 7440-50-8 90.08~99.00 Nickel (Ni) Tin (Sn) 7440-02-0 7440-31-5 1~9.92 Total weight Headquarters Riverside CA Traces 1.4552 www.bourns.com page 1 of 2 MATERIAL DECLARATION SHEET Contact person Cathy Godfrey Bourns location Riverside, CA Phone Ext. 5008 Bourns , Inc. 1200 Columbia Ave. Riverside, CA 92507 USA phone: 951 781-5690 fax: 951 781-5273 Fax e-mail [email protected] Important remarks: 1. 2. 3. 4. Traces are product parts substances etc. that are below a percentage of 0.1% of total weight. A list of the legally regulated substances or materials is available at internet address http://www.eicta.org/content.asp?pageID=113 Substances, materials etc. with possible harm to men and environment are listed. There are no risks for human beings and to the environment if products are used properly as designated. This shall not apply to risks caused during procedures for disposal etc. 5. All statements herein are based on our present knowledge. Headquarters Riverside CA www.bourns.com page 2 of 2