Features OM PL IA N T n Small size and flexibility n Three alarm features: integrated LED, C audible and relay n ONT reset function n Cold start function n Alarm silence function n Surge protection and filtering n UL Listed F RE E ** Ro HS LE AD n Removable and replaceable Li-ion battery pack with 4-6 hours of back-up at 8 W MP1218-L1 Series Indoor Micro UPS Characteristics Ro VE LEA HS RS D C ION FRE OM S E PL AR IA E NT * The Bourns® Model MP1218-L1 Series Micro Uninterruptible Power Supply (UPS) is designed and primarily intended for use as a DC power supply and battery back- up device for 12 Vdc Optical Network Terminals (ONTs). However, the MP1218-L1 Series can be utilized in any 12 Vdc application where DC power and battery back-up can be utilized. During normal operation, the Micro UPS provides a constant supply of DC power and additionally provides battery back-up power in the case of an electrical power outage. Specification INPUT Voltage Range Frequency Range Input Power Cord Ground Reference POWER SUPPLY OUTPUT Model MP1218-L1 Series 100 Vac to 240 Vac 50 / 60 Hz NEMA 5-15/3-Prong Power Cord Earth Grounded Output Voltage Continuous Power Capacity 12 Vdc (Nominal) 1.5 A (18 Watts) Output Voltage Continuous Power Capacity 12 Vdc (Nominal) 0.8 A (9.6 Watts) UPS OUTPUT BATTERY Battery Type Design Life Number of Batteries Typical Recharge Time Replaceable Pack SURGE PROTECTION AND FILTERING Lightning / Surge Protection MANAGEMENT Battery Auto-Charge Remote Battery Alarming Local Alarming (Audible/Visual) Temperature Monitoring Alarm Silence 24-Hour Silence Disable Indefinitely ONT Reset Cold Start “Emergency Standby” PHYSICAL Maximum Dimensions (LxWxD) Weight ENVIRONMENTAL Operating Temperature Operating Humidity Maximum Operating Elevation Storage Temperature Lithium-Ion Battery Pack 10 to 15 Years 3.7 V / 2600 mAH x 4 < 10 Hours Yes IEC 61000-4-5 2005 Level D Yes Optional Yes Yes Yes Yes Yes Yes 162.6 x 42.9 x 49.8 mm (6.4 x 1.69 x 1.96 in.) 1.25 lb (with battery pack) -10 °C to +49 °C (+14 °F to +120.2 °F) at Full Power 0-95 % Noncondensing within Enclosure 3,000 m (10,000 ft.) -30 °C to +65 °C (-22 °F to +149 °F) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Applications n Optical Network Terminals (ONTs) n VoIP n FTTH n Video n Any application requiring 12 Vdc MP1218-L1 Series Indoor Micro UPS Output Cabeling Options NOTE: Please verify that all contents are accounted for upon receipt of Micro UPS. C2 2-Conductor Output Contents of Standard MP1218-L1-C2 Micro Power Supply Package: AC INPUT POWER CORD CONNECTOR (1) Power Supply / Charger (1) Li-ion Battery Pack (1) A/C Power Cord (2) Barrel Connectors (1) User Manual FRONT VIEW C7 7-Conductor Vdc and Telemetry Output AC INPUT POWER CORD CONNECTOR DC OUTPUT / TELEMETRY CONNECTOR Pin Color AWG Description A Red 20 Power Input (+12 Vdc) B Black 20 Power 12 Vdc Return C Green 26 Signal Return D White 26 On Battery E Brown 26 Replace Battery F Blue 26 Battery Missing G Orange 26 Low Battery Contents of Standard MP1218-L1-C7 Micro Power Supply Package: (1) Power Supply / Charger (1) Li-ion Battery Pack (1) A/C Power Cord (1) 7-Pin Connector (1) User Manual How to Order MP 1218 - L1 - YY Series Designator MP = Micro Power Supply Series Output / Wattage Designator 1218 = 12 Vdc Output / 18 Watts Unit Designator L1 = Power Supply + Standard Li-ION Battery (4-6 Hours at 8 Watt Draw Rate) Output Cabeling and Telemetry Options C2 = 2-Conductor Output / No Telemetry C7 = 7-Conductor Vdc and Telemetry Output Option Audible Alarm Visual Alarm Relay Alarm to ONT C2 C7 Yes Yes Yes Yes No Yes Custom cabeling available - please contact Bourns Customer Service. Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com Replacement Battery = Part No. MP18-L1 REV. A 01/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.