Features -- - ------------------ ----------L - SPECIFICATIONS Properties Electrostatic Decay Surface Resistance Surface Resistance, Low R.H. Cut-off High-Voltage Discharge Resistance Static Shielding Charged Device Model (CDM) Safety Current-Carrying Hazard Corrosivity Antistat Transfer Water & Isopropyl Alcohol Extraction Tests for Antistat Permanence Sloughing Test Shelf Life -- --- D -- --- Recyclability Biodegradability Volume Conductivity RoHS Compliance Statement None of the following materials are intentionally added in manufacturing this product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Protektive Pak Inc. letter on-line at ProtektivePak.com. - -- W • Economical and efficient way to store and transport DIP Tubes and Rails • Each cell has an extender tab which may be labeled to identify the contents • Tube Handler may be rotated on shelves to view the extender tab either vertically or horizontally • Cell identification labels included • Shipped knocked-down; easy to assemble • Made in America Made in America Typical Values 0.01 seconds at 72°F and 11.8% R.H. 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer 4% R.H. Failure rate 0/5 (no oxide damage in five consecutive tests) 99.9% attenuation at 10kV; 99.6% attenuation at 30kV RTG >10E7 ohms at 86% R.H. or less 10E3 mA at 110V; 10E3 mA at 220V Contains 1-3 ppm reducible sulfur No transfer Surface resistance 10E8 - 10E9 ohms/square at 74°F and 36% R.H. Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Biodegradation in or on moist soil Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property Indefinite Test Procedures/Method FED-STD-101, Method 4046 ASTM D257 Rockwell International Test Report of December 20, 1991 Rockwell International Test Report of December 20, 1991 EIA 541, appendix E, capacitive probe test Rockwell International Test Report of December 20, 1991 ESD from A to Z FED-STD-101, Method 3005 for reducible sulfur Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 TUBE HANDLERS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578, FAX (909) 363-7331 ProtektivePak.com © 2007 DESCO INDUSTRIES INC. Employee Owned See reverse side for available sizes. DRAWING NUMBER 37790 DATE: September 2007 Item No. © 2007 DESCO INDUSTRIES INC. Employee Owned O.D. LxWxD Cell I.D. LxWxD # of Cells 37790 12 x 6 x 20 1-7/8 x 1-7/8 x 20 10 37791 12 x 6 x 24 1-7/8 x 1-7/8 x 24 10 37792 12 x 12 x 20 1-7/8 x 1-7/8 x 20 25 37793 12 x 12 x 24 1-7/8 x 1-7/8 x 24 25 37794 24 x 12 x 20 1-7/8 x 1-7/8 x 20 50 37795 24 x 12 x 24 1-7/8 x 1-7/8 x 24 50