SENSITRON SEMICONDUCTOR SD125SC200A/B/C TECHNICAL DATA DATASHEET 4938, Rev A SILICON SCHOTTKY RECTIFIER DIE Very Low Forward Voltage Drop Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • • • • • Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Reverse Leakage Current Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Electrically / Mechanically Stable during and after Packaging Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Symbol VRWM IF(AV) Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current IFSM Max. Junction Temperature Max. Storage Temperature TJ Tstg EAS IAR Condition 50% duty cycle, rectangular wave form 8.3 ms, half Sine wave (1) Max. 200 15 Units V A 280 A TJ = 25 °C, IAS = 0.6 A, L = 40mH IAS decay linearly to 0 in 1 µs ƒ limited by TJ max VA=1.5VR - 7.2 mJ 0.6 A -65 to +200 -65 to +200 °C °C Max. 0.92 0.76 350 Units V V µA 8 mA 300 pF Electrical Characteristics: Characteristics Max. Forward Voltage Drop Max. Reverse Current Symbol VF1 VF2 IR1 IR2 Max. Junction Capacitance CT Condition @ 15A, Pulse, TJ = 25 °C @ 15A, Pulse, TJ = 125 °C @VR = 200V, Pulse, TJ = 25 °C @VR = 200V, Pulse, TJ = 125 °C @VR = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) (1) in SHD package • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SD125SC200A/B/C SENSITRON TECHNICAL DATA DATASHEET 4938, Rev A Typical Reverse Characteristics Typical Forward Characteristics 101 Instantaneous Reverse Current - IR (mA) 200 °C 101 200 °C 100 10 175 °C 150 °C 10-1 125 °C 10-2 100 °C 75 °C 10-3 50 °C 10-4 25 °C 10-5 125 °C 0 40 -1 10 80 120 160 Reverse Voltage - VR (V) 200 240 Typical Junction Capacitance 25 °C -2 10 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - VF (V) 1.0 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 175 °C 0 300 240 180 120 60 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SD125SC200A/B/C SENSITRON TECHNICAL DATA DATASHEET 4938, Rev A Mechanical Dimensions: In Inches / mm D H h B A Figure 2 Figure 1 A 0.125±0.003 B 0.116±0.003 D 0.070±0.005 H 0.0155±0.001 h 0.010±0.002 Top side(Anode) metallization: A = Al - 25 kÅ minimum, Figure 1 B = Ag - 30 kÅ minimum, Figure 1 C = Au - 12 kÅ min, Figure 2 Bottom side (Cathode) metallization: A, B, C = Ti/Ni/Ag - 30 kÅ minimum. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •