SHD118146 SHD118146B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 911, REV. A HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Applications: Switching Power Supply Converters Free-Wheeling Diodes Polarity Protection Diode Features: Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Reverse Leakage Current Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Symbol VRWM IF(AV) Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current IFSM Maximum Thermal Resistance Max. Junction Temperature Max. Storage Temperature R JC TJ Tstg EAS IAR Condition 50% duty cycle, rectangular wave form (per leg) 8.3 ms, half Sine wave (per leg) TJ = 25 C, VRSM = 0.4 A, L = 40mH IAS decay linearly to 0 in 1 s limited by TJ max VA=1.5VR - Max. 200 7.5 Units V A 140 A 7.7 mJ 0.4 A 3.2 -65 to +200 -65 to +200 C/W C C Max. 0.92 0.76 0.18 Units V V mA 4.0 mA 150 pF 25 nsec Electrical Characteristics: Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current Symbol VF1 VF2 IR1 (per leg) IR2 Max. Junction Capacitance (per leg) CT Max. Reverse Recovery Time trr Condition @ 7.5A, Pulse, TJ = 25 C @ 7.5A, Pulse, TJ = 125 C @VR = 200V, Pulse, TJ = 25 C @VR = 200V, Pulse, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) IF = 0.5 A, IR =1.0 A, IRM = 0.25 A, TJ = 25 C 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD118146 SHD118146B SENSITRON DATA SHEET 911, REV. A MECHANICAL DIMENSIONS: In Inches / mm .520±.020 (13.2±.508) .370±.010 (9.40±.254) .370±.010 (9.40±.254) .090±.010 (2.29±.254) .030±.010 (.762±.254) 2 2 .610±.010 (15.5±.254) .030±.010 (.762±.254) 3 .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) 3 .110 (2.80) Max Alumina Ring Terminal 1 Copper Terminals .130 (3.30) Max SHD-5 Moly Lid .020±.005 R (.508±.127 ) Alumina Ring .015±.002 (.381±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) 2 1 3 COMMON CATHODE SHD-5B PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) PIN 1 COMMON CATHODE PIN 2 ANODE Typical Reverse Characteristics Typical Forward Characteristics 101 Instantaneous Reverse Current - I R (mA) 101 175 °C 10-1 200 °C 175 °C 100 150 °C 10-1 125 °C 100 °C 10-2 75 °C 10-3 50 °C 10-4 25 °C -5 10 125 °C 0 40 80 120 160 Reverse Voltage - RV (V) 200 240 Typical Junction Capacitance 25 °C 10-2 10-3 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop -FV(V) 1.0 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 200 °C 100 PIN 3 ANODE 120 80 40 0 0 40 80 120 160 Reverse Voltage - RV (V) 200 240 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD118146 SHD118146B SENSITRON DATA SHEET 911, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]