CD 269 PH Series 4 000h at 125°C CD 11G GW CD 281 LL · High Reliability at High Temperature · Automotive · Professional Long-Life Applications 125°C CD 263 BK longer life CD 287 GC higher voltage CD 269 PH 125°C lower ESR lower ESR Item Characteristics Operating Temperature Range (°C) -40 ~ +125 Voltage Range (V) 10 ~ 63 Capacitance Range (µF) 47 ~ 3300 Capacitance Tolerance (20°C, 120Hz) ± 20% Leakage Current (µA) After 2 minutes at 20°C application of rated voltage, leakage current is less than 0,04CV. C: Nominal Capacitance (µF) V: Rated Voltage (V) Rated Voltage (V) Dissipation Factor (20°C, 120Hz) Tanδ(max) 10 16 25 35 50 63 0,20 0,16 0,14 0,12 0,10 0,09 Radial CD 284 XY For Capacitances >1.000µF add 0,02 to every 1.000µF Useful Life 4 000h Lifetime >200 000h Load Life Endurance Test 2 000h Shelf Life 3 000h 1 000h Leakage Current Not more than specified value Not more than specified Not more than specified value value Capacity Change Within ± 50% of initial value Within ± 30% of initial value Within ± 30% of initial value Within ± 30% of initial value Not more than 500% of specified value Not more than 300% of specified value Not more than 300% of specified value Not more than 300% of specified value UR UR UR UR UR = 0 IR 1,4 x IR IR IR = 0 IR = 0 125°C 50°C 125°C 125°C 125°C ≤ 1% Failure Rate ≤ 1% Failure Rate guaranteed Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level Not more than specified value After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient Lifetime Diagram 2.5 Frequency 120Hz 1kHz 10kHz 100kHz 47 ~ 100 0,40 0,75 0,90 1,00 220 ~ 330 0,50 0,85 0,95 1,00 470 ~ 1 000 0,60 0,88 0,96 1,00 2 200 ~ 3 300 0,75 0,90 0,98 1,00 Capacitance (µF) CD 269 PH Series IA ––– 2.0 IR 1.5 1.0 0.5 X32 X16 X8 X4 X2 X1 Lifetime Multiplier 0.0 60 70 80 90 100 110 120 130 TA (˚C) IA = actual ripple current at 100kHz, IR = rated ripple current at 100kHz, 125°C Multiplier of Useful Life as a function of ambient temperature and ripple current load Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 29 CD 269 PH Series Ratings for CD 269 PH Series VDC (Surge Voltage) Code Rated Capacitance Max ESR 20°C, 120Hz Max Imp 20°C, 100kHz Max Imp -10°C, 100kHz Max Ripple Current 125°C, 100kHz (V) (µF) (Ω) (Ω) (Ω) (mArms) 10 (13) 1A Radial 16 (20) 1C 25 (32) 1E 35 (44) 1V 50 (63) 1H 63 (79) 1J Size ØDxL (mm) 330 0,80 0,33 0,66 340 8 x 11,5 10 x 12,5 470 0,57 0,24 0,48 500 1 000 0,27 0,12 0,24 770 10 x 20 2 200 0,14 0,061 0,13 1 250 12,5 x 25 3 300 0,10 0,050 0,10 1 380 16 x 25 220 0,97 0,33 0,66 340 8 x 11,5 330 0,65 0,24 0,48 500 10 x 12,5 470 0,46 0,20 0,40 630 10 x 16 1 000 0,22 0,077 0,16 920 12,5 x 20 2 200 0,11 0,050 0,10 1 380 16 x 25 220 0,85 0,23 0,46 480 8 x 16 330 0,57 0,20 0,40 630 10 x 16 470 0,40 0,12 0,24 770 10 x 20 1 000 0,19 0,061 0,13 1 250 12,5 x 25 100 1,60 0,33 0,66 340 8 x 11,5 220 0,73 0,20 0,40 630 10 x 16 330 0,49 0,12 0,24 770 10 x 20 12,5 x 20 470 0,34 0,077 0,16 920 1 000 0,16 0,050 0,10 1 380 16 x 25 100 1,33 0,36 0,72 420 10 x 12,5 220 0,61 0,20 0,40 655 10 x 20 330 0,41 0,12 0,24 780 12,5 x 20 470 0,29 0,10 0,20 1 060 12,5 x 25 47 2,55 0,68 2,1 245 8 x 11,5 100 1,20 0,38 1,2 425 10 x 16 220 0,55 0,18 0,54 665 12,5 x 20 330 0,37 0,14 0,42 900 12,5 x 25 Custom products are available on request. Capacitance Ratio 100 C/Co Z/Zo Impedance Ratio 16V 2 200µF 63V 2 20µF 10 1.20 1.10 1.00 0.90 1.0 0.80 0.70 0.1 100 0.60 1 000 10 000 100 000 f (Hz) Z = actual Impedance of each frequency at 20°C Zo = Impedance at 100kHz, 20°C Impedance Ratio as a function of frequency 30 - 40 - 25 - 10 20 55 85 105 25V 1 000µF 125 T (°C) C = actual capacitance of each temperature at 100Hz Co = Capacitance at 20°C, 100Hz Capacitance Ratio as a function of temperature (typical curve) Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance 0,47 = R47 ±20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 ±10% =K +50 / -10% = T Taped = FF Terminal = T2 5x11,5 = 0511 6,3x11,5= 0611 CD 262 = QM 10 000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90° - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions Ø DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 16 5,0 0,6 1,0 18 7,5 0,8 20 22 10,0 25 12,5 1,0 2,0 in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range ØD Dimensions L (max) H ± 0,75 Ho ± 0,5 F ± 0,5 P ± 0,1 4~6 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 Ammopack Form Form A A Form B FF 16 B 12,7 8 22 20,0 5 10 22 18,5 A FD 12,5 27 18,5 - 15,0 12,5 27 18,5 - 25,4 Form C C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code CB CC CD CE CF I 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 preferred in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2