SR30100LCT,SRF30100LCT,SR30100LD1 R LOW VF SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 100 Volts Forward Current - 30.0Amperes S E M I C O N D U C T O R TO-220AB ITO-220AB SR30100LCT FEATURES SRF30100LCT JF SR30100LCT Power pack Metal silicon junction ,majority carrier conduction Pb Guard ring for overvoltage protection Low power loss ,high efficiency RoHS COMPLIANT High current capability ,low forward voltage drop High forward surge capability High frequency operation Meets MSL Level 1,per J-STD-020,LF MAX peak of 245℃(for TO-263 package) Solder bath temperature 275℃ maximum,10s,per JESD22-B106(for TO-220AB and ITO-220AB package) Component in accordance to RoHS 2011/65/EU 1 2 JF SRF30100LCT 2 1 3 Pin1 Pin2 Pin1 Pin3 CA S E Pin3 3 Pin2 TO-263 SR 3 0 JF 10 0L D1 SR30100LD1 K 2 MECHANICAL DATA 1 Case: JEDEC TO-220AB、ITO-220AB、TO-263 Pin1 Molding compound meets UL94V-0 flammability rating Pin2 K HEATSINK Terminals: Lead solderable per J-STD-002 and JESD22-B102 Polarity: As marked PRIMARY CHARACTERISTICS Mounting Torque: 10 in-Ibs maximum IF(AV) TYPICAL APPLICATIONS For use in low voltage ,high frequency inverters ,DC/DC converters,free wheeling ,and polarity protection applications 2×15A VRRM 100V IFSM 250A VF at IF=5.0A,Per leg 0.48V IR 20μA TJ(MAX) 150℃ TO-220AB,ITO-220AB, TO-263 Package Common cathode Diode variations MAXIMUM RATINGS (Ratings at 25℃ ambient temperature unless otherwise specified ) Parameter Maximum repetitive peak reverse voltage Maximum average forward rectified current (see fig.1) Symbol SR30100LCT, SRF30100LCT,SR30100LD1 Unit VRRM 100 V Per leg IF(AV) Total device 15.0 A 30.0 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method at rated TL) IFSM 250 A Peak repetitive reverse current per diode at tp=2μs 1KHz I RRM 0.5 A TJ ,Tstg -55 to+150 ℃ V AC 1500 V Operating junction and Storage temperature range Isolation voltage(ITO-220AB only)from terminals to heatsink t=1 min JINAN JINGHENG ELECTRONICS CO., LTD. 4-1 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC OF SR30100LCT,SRF30100LCT,SR30100LD1 ELECTRICAL CHARACTERISTCS(TA=25℃ Unless otherwise noted) Test Conditions Parameter T A =25℃ T A =100℃ T A =125℃ T A =25℃ T A =100℃ T A =125℃ Per leg I F =15.0A Instaneous forward voltage Per leg I F =5.0A Symbol TYP. 1) 0.69 0.67 0.64 0.50 0.49 0.48 VF T A =25℃ Re V erse T A =100℃ V R =100V C urrent IR 2) MAX. Unit 0.71 - V 0.52 - 20 50 2 5 8 20 μA mA T A =125℃ 4V,1MHz Typical junction capacitance 570 CJ pF Notes: 1.Pulse test: 300 μs pulse width,1% duty cycle 2.Pulse test: pulse width≤40ms THERMAL CHARACTERISTCS(TA=25℃ Unless otherwise noted) Symbol Parameter Typical thermal resistance 3) R JC SR30100LCT SRF30100LCT SR30100LD1 Unit 2.5 4.5 2.5 ℃/W 3.Thermal resistance from junction to case AVAILABALE PACK INFORMATION Pack Box Size L×W×H(mm) Quantity(pcs/box) SR30100LCT-TO-220AB P/T 558×148×38 1000 565×225×170 5 SRF30100LCT-ITO-220AB P/T 558×148×38 1000 565×225×170 5 SR30100LD1-TO-263 P/T 558×148×38 1000 565×225×170 5 Product code JINAN JINGHENG ELECTRONICS CO., LTD. 4-2 Carton SizeL×W×H(mm) Quantity(box/carton) HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC OF SR30100LCT,SRF30100LCT,SR30100LD1 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30.0 300 25.0 SR30100LCT SR30100LD1 TJ=TJMAX 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 250 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 20.0 15.0 RESISTIVE OR INDUCTIVE LOAD 10.0 SRF30100LCT 5.0 200 150 100 50 0 0 0 20 40 60 80 100 120 140 150 1 10 CASE TEMPERATURE ( ℃) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 200 16 14 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT( AMPERES) 100 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300μS 1% DUTY CYCLE 12 Per diode 10 TJ=100℃ 8 TJ=125℃ TJ=25℃ 6 4 2 100 Per diode 10 TJ=125℃ TJ=100℃ 1 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 TJ=25℃ INSTANTANEOUS FORWARD VOLTAGE (V) 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 4000 1000 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 4-3 HTTP://WWW.JINGHENGGROUP.COM PACKAGE OUTLINE DIMENSIONS TO-220AB 0.161(4.10) 0.147(3.74) DIA 0.410(10.41) 0.390(9.91) ITO-220AB 0.185(4.70) 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.114(2.90) 0.102(2.60) 0.410(10.41) 0.140(3.55) 0.390(9.91) 0.128(3.25) DIA 0.187(4.75) 0.167(4.25) 0.130(3.31) 0.111(2.81) 0.283(7.20) 0.244(6.20) 0.111(2.83) 0.101(2.57) 0.272(6.90) 0.256(6.50) 1 PIN 2 3 1.161(29.50) 1.106(28.10) 0.159(4.05) 0.138(3.50) 0.114(2.90) 0.098(2.50) 0.560(14.22) 0.516(13.10) 0.053(1.34) 0.047(1.20) 1 PIN 2 3 1.161(29.5) 0.177(4.50) 0.102(2.60) 0.037(0.94) 0.027(0.68) 0.105(2.67) 0.095(2.41) 0.551(14.00) 0.067(1.70) 0.059(1.50) 0.056(1.43) 0.043(1.10) 0.023(0.58) 0.014(0.35) 0.208(5.28) 0.110(2.80) 1.083(27.5) 0.138(3.50) 0.512(13.00) 0.029(0.73) 0.019(0.47) 0.104(2.64) 0.096(2.44) 0.192(4.88) 0.029(0.73) 0.019(0.47) TO-263 0.420(10.67) 0.380(9.65) 0.190(4.83) Suggested Pad Layout 0.160(4.06) 0.245(6.22) MIN 0.055(1.40) (TO-263) 0.045(1.14) 0.42(10.67)MIN 0.320(8.13) 1 K 2 0.639(16.22) 0.560(14.22) 0.053(1.34) 0.047(1.20) 0.131(3.32) 0.090(2.29) 0.095(2.41) 0.083(2.10) 0.639(16.22) 0.560(14.22) 0.066(1.68) 0.036(0.92) 0.360(9.14) 0.037(0.94) 0.027(0.69) 0.134(3.40) 0.15(3.81)MIN 0.018(0.46) 0.014(0.35) 0.08(1.032)MIN 0.095(2.41) 0.083(2.10) 0.105(2.67) Dimensions in inches and (millimeters) JINAN JINGHENG ELECTRONICS CO., LTD. 4-4 HTTP://WWW.JINGHENGGROUP.COM