SR4060LCT,SRF4060LCT,SR4060LD1 R LOW VF SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 60 Volts Forward Current - 40.0Amperes S E M I C O N D U C T O R TO-220AB ITO-220AB SR4060LCT FEATURES SRF4060LCT JF SR4060LCT Power pack Metal silicon junction ,majority carrier conduction Pb Guard ring for overvoltage protection Low power loss ,high efficiency RoHS COMPLIANT High current capability ,low forward voltage drop High forward surge capability High frequency operation Meets MSL Level 1,per J-STD-020,LF MAX peak of 245℃(for TO-263 package) Solder bath temperature 275℃ maximum,10s,per JESD22-B106(for TO-220AB and ITO-220AB package) Component in accordance to RoHS 2011/65/EU 2 1 JF SRF4060LCT 2 1 3 Pin1 Pin2 Pin1 Pin3 CA S E Pin3 3 Pin2 TO-263 SR K J 40 F 60 LD 1 SR4060LD1 2 MECHANICAL DATA 1 Case: JEDEC TO-220AB、ITO-220AB、TO-263 Pin1 Molding compound meets UL94V-0 flammability rating Pin2 K HEATSINK Terminals: Lead solderable per J-STD-002 and JESD22-B102 Polarity: As marked PRIMARY CHARACTERISTICS Mounting Torque: 10 in-Ibs maximum IF(AV) TYPICAL APPLICATIONS For use in low voltage ,high frequency inverters ,DC/DC converters,free wheeling ,and polarity protection applications 2×20A VRRM 60V IFSM 300A VF at IF=20.0A,Per leg 100μA IR TJ(MAX) 150℃ TO-220AB,ITO-220AB, TO-263 Package Diode variations MAXIMUM RATINGS 0.54V Common cathode (Ratings at 25℃ ambient temperature unless otherwise specified ) Parameter Maximum repetitive peak reverse voltage Maximum average forward rectified current (see fig.1) Symbol SR4060LCT, SRF4060LCT,SR4060LD1 Unit VRRM 60 V Per leg IF(AV) Total device 20.0 A 40.0 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method at rated TL) IFSM 300 A Peak repetitive reverse current per diode at tp=2μs 1KHz I RRM 0.5 A TJ ,Tstg -55 to+150 ℃ V AC 1500 V Operating junction and Storage temperature range Isolation voltage(ITO-220AB only)from terminals to heatsink t=1 min JINAN JINGHENG ELECTRONICS CO., LTD. 4-1 HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC OF SR4060L,SRF4060LCT,SR4060LD1 ELECTRICAL CHARACTERISTCS(TA=25℃ Unless otherwise noted) Test Conditions Parameter T A =25℃ T A =100℃ T A =125℃ T A =25℃ T A =100℃ T A =125℃ Per leg I F =20.0A Instaneous forward voltage Per leg I F =10.0A Symbol TYP. 1) 0.54 0.54 0.54 0.44 0.41 0.40 VF T A =25℃ IR 2) Unit 0.56 - V μA 150 100 T A =100℃ V R =60V Reverse current MAX. 7 10 20 50 mA T A =125℃ 4V,1MHz Typical junction capacitance 570 CJ pF Notes: 1.Pulse test: 300 μs pulse width,1% duty cycle 2.Pulse test: pulse width≤40ms THERMAL CHARACTERISTCS(TA=25℃ Unless otherwise noted) Symbol Parameter Typical thermal resistance 3) R JC SR4060LCT SRF4060LCT SR4060LD1 2.5 4.5 2.5 Unit ℃/W 3.Thermal resistance from junction to case AVAILABALE PACK INFORMATION Pack Box Size L×W×H(mm) Quantity(pcs/box) SR4060LCT-TO-220AB P/T 558×148×38 1000 565×225×170 5 SRF4060LCT-ITO-220AB P/T 558×148×38 1000 565×225×170 5 SR4060LD1-TO-263 P/T 558×148×38 1000 565×225×170 5 Product code JINAN JINGHENG ELECTRONICS CO., LTD. 4-2 Carton SizeL×W×H(mm) Quantity(box/carton) HTTP://WWW.JINGHENGGROUP.COM RATINGS AND CHARACTERISTIC OF SR4060L,SRF4060LCT,SR4060LD1 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 300 40 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE SR4060LCT SR4060LD1 30 20 INDUCTIVE OR RESISTIVE LOAD 10 SRF4060LCT TJ=TJMAX 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 250 200 150 100 50 0 0 50 100 0 150 1 LEAD TEMPERATURE ( C) 10 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 200 100 PULSE WIDTH=300μS 1% DUTY CYCLE Per Diode INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT( AMPERES) 100 Per Diode 10 5 TJ=100℃ 1 TJ=125℃ TJ=25℃ 0.1 TJ=125℃ 10 TJ=100℃ 1 0.1 TJ=25℃ 0.01 0 0.1 0.3 0.2 0.4 0.5 0.6 0.7 0.01 0.8 0 INSTANTANEOUS FORWARD VOLTAGE (V) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 4000 Per Diode 1000 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS JINAN JINGHENG ELECTRONICS CO., LTD. 4-3 HTTP://WWW.JINGHENGGROUP.COM PACKAGE OUTLINE DIMENSIONS TO-220AB 0.161(4.10) 0.147(3.74) DIA 0.410(10.41) 0.390(9.91) ITO-220AB 0.185(4.70) 0.175(4.44) 0.055(1.39) 0.045(1.14) 0.114(2.90) 0.102(2.60) 0.410(10.41) 0.140(3.55) 0.390(9.91) 0.128(3.25) DIA 0.187(4.75) 0.167(4.25) 0.130(3.31) 0.111(2.81) 0.283(7.20) 0.244(6.20) 0.111(2.83) 0.101(2.57) 0.272(6.90) 0.256(6.50) 1 PIN 2 3 1.161(29.50) 1.106(28.10) 0.159(4.05) 0.138(3.50) 0.114(2.90) 0.098(2.50) 1 0.560(14.22) 0.516(13.10) 0.053(1.34) 0.047(1.20) PIN 2 3 1.161(29.5) 0.177(4.50) 0.102(2.60) 0.037(0.94) 0.027(0.68) 0.105(2.67) 0.095(2.41) 0.551(14.00) 0.067(1.70) 0.059(1.50) 0.056(1.43) 0.043(1.10) 0.023(0.58) 0.014(0.35) 0.208(5.28) 0.110(2.80) 1.083(27.5) 0.138(3.50) 0.512(13.00) 0.029(0.73) 0.019(0.47) 0.104(2.64) 0.096(2.44) 0.192(4.88) 0.029(0.73) 0.019(0.47) TO-263 0.420(10.67) 0.380(9.65) 0.190(4.83) Suggested Pad Layout 0.160(4.06) 0.245(6.22) MIN 0.055(1.40) (TO-263) 0.045(1.14) 0.42(10.67)MIN 0.320(8.13) 1 K 2 0.639(16.22) 0.560(14.22) 0.053(1.34) 0.047(1.20) 0.131(3.32) 0.15(3.81)MIN 0.090(2.29) 0.095(2.41) 0.083(2.10) 0.639(16.22) 0.560(14.22) 0.066(1.68) 0.036(0.92) 0.360(9.14) 0.037(0.94) 0.027(0.69) 0.018(0.46) 0.134(3.40) 0.014(0.35) 0.08(1.032)MIN 0.095(2.41) 0.083(2.10) 0.105(2.67) Dimensions in inches and (millimeters) JINAN JINGHENG ELECTRONICS CO., LTD. 4-4 HTTP://WWW.JINGHENGGROUP.COM