Q-MultiFlex™ Point-to-multipoint IP Modulator / Multi-demodulator OVERVIEW The Q-MultiFlex™ offers a new, cost-effective solution for point-to-multipoint IP satellite systems. The Q-MultiFlex™ supports a highlyefficient DVB-S2X shared outbound along with up to 16 FastLink™ low-latency LDPC returns. The network system can optionally be controlled via our innovative Q-Net™ Bandwidth Manager, supporting a wide range of centralised bandwidth management, network management, monitoring and reporting functions. The Q-MultiFlex™ interoperates with low-cost Q -Lite™ and Q-Flex™ remote network modems. The Q-MultiFlex™ supports the most powerful bandwidth-saving technology available. Advanced Bandwidth-Efficient Features Paired Carrier™ (using ViaSat’s patented PCMA technology) overlays transmit and receive carriers reducing satellite bandwidth by 50% . DVB-S2X, the successor to the highly robust and bandwidth-efficient DVB-S2, is supported and includes support for spectral roll-off factors as low as 5%. ACM allows any otherwise unused link margin to be converted into additional throughput. Teledyne Paradise Datacom LLC 328 Innovation Blvd., Suite 100 State College, PA 16803 USA Tel: 1 (814) 238-3450 Fax: 1 (814) 238-3829 1 OF 5 FEATURES Star, mesh & hybrid point-to-multipoint IP Modulator & up to 16 demodulators Dual IF/L-band operation Scalable to any network size DVB-S2X shared outbound FastLink™ low-latency LDPC returns Data rates to 160Mbps outbound & inbound XStream IP™ is an integrated suite of advanced IP optimization & traffic management features including TCP acceleration, header & payload compression, dynamic routing, traffic shaping, encryption & ACM Optimized spectral roll-offs, down to 5% Paired Carrier™ option Optional Q-Net™ Bandwidth Manager Supports low-cost Q-Lite™ & Q-Flex™ remote modems LinkGuard™ signal-under-carrier interference detection Built-in spectrum and constellation monitors DVB Carrier ID. Fully compliant with DVBCID standard Markets and Applications IP trunking and backhaul Corporate networking Mobile backhaul Disaster recovery Maritime communications Cellular backhaul www.paradisedata.com Teledyne Paradise Datacom Ltd. 2&3 The Matchyns, London Road, Rivenhall End Witham, Essex, CM8 3HA United Kingdom Tel: +44(0) 1376 515636 Fax: +44(0) 1376 533764 213622 Issued 5 March 2015 Q-MultiFlex™ Point-to-multipoint IP Modulator / Multi-demodulator Common Specifications Modulator Specification XStream IP™ Tier 1 (Tx only) Frequency Operating Modes XStream IP™ is an integrated set of IP optimization and traffic management features designed for maximum reliability and bandwidth efficiency. The following features are provided as a standard part of the Modulator Option. Traffic Provides guaranteed throughput for Shaping priority traffic; supports Committed and Burst Information Rates. Stream classification uses one or more of: VLAN ID, IP address, IEEE 802.1p priority & Diffserv DSCP IP-overSupports the transmission of IP DVB packets with/without Ethernet frames Encapsulation over DVB-S2/DVB-S2X; encapsulates & decapsulates using our highly-efficient Paradise XStream Encapsulation (PXE) Traffic Interface Network Topologies Impedance Return Loss Redundancy IF: 50 to 90MHz & 100 to 180MHz (resolution 100Hz) (BNC connector) L-band: 950 to 2150MHz (resolution 100Hz) (N-type connector) Standard: Single Ethernet Gigabit RJ45 Options: 4-port Gigabit Ethernet switch (extends base modem Ethernet traffic port with another 3 Ethernet ports, creating 4-port switch) Optical Gigabit Ethernet (Small FormFactor pluggable module supporting all common optical standards) Supports star, mesh and hybrid networks IF: 50Ω/75Ω; L-band: 50Ω IF: >18dB; L-band: >15dB 1:1 or up to 1:16 redundancy Data Rate (1bps resolution) Symbol Rate (1sps resolution) DVB-S2X (EN 302 307-2) DVB-S2 (EN 302 307-1) FastLink™ Low-latency LDPC DVB-S2X: 100kbps to 160Mbps DVB-S2: 100kbps to 160Mbps FastLink™: 18kbps to 100Mbps DVB-S2X: 100ksps to 50Msps DVB-S2: 100ksps to 50Msps FastLink™: 18ksps to 40Msps Output Power (0.1dB resolution) IF: 0 to –25dBm L-band: 0 to –40dBm Output Power Stability/Accuracy Stability: ±1.0dB, 0ºC to 50ºC Accuracy: ±0.375dBm Transmit Filter Roll-off DVB-S2/S2X: 5%, 10%, 15%, 20%, 25%, 35% FastLink™: 5%, 10%, 15%, 20%, 25%, 35% ±2º maximum XStream IP™ Tier 2 (Tx only) Option Demodulator Specification Phase Accuracy A demodulator add-on card supports 8 demodulators. One demodulator card is fitted as standard and a second can be optionally fitted, supporting up to 16 demodulators in total. Demodulators are enabled in software in blocks of 4. Amplitude Accuracy ±0.2dB maximum The Tier 2 option extends the transmit capabilities provided by the XStream IP™ Tier 1 option. Carrier Suppression -30dBc minimum DVB-S2/S2X ACM Output Phase Noise As EN 302 307 & IESS-316 Harmonics & Spurious Better than –60dBc/ 4kHz in-band (at 0dBm to –30dBm output) Transmit On/Off Ratio -65dBc minimum BUC PSU Option 24V or 48V DC via IFL cable, 200W BUC 10MHz Reference Via IFL cable; 10MHz ± 0.01 ppm; 3dBm ± 3dB XStream IP™ Tier 3 (Tx and Rx) Option FSK Control Allows monitor & control of a compatible L-band BUC from the modem via the Tx IFL cable The following features apply to both transmit and receive and can be used independently of XStream IP™ Tier 1 and XStream IP™ Tier 2 options. The Tier 3 option supports all demodulators for a single price. Header Robust Header Compression (RFC Compression 3095). Reduces Ethernet/IP/UDP/ TCP/RTP header sizes typically by 90%. 1-way packet processing limit: 60,000 pps; 2-way limit: 45,000 pps. Includes Ethernet header compression (compresses 14-byte Ethernet frame to typically one byte) Payload Uses Deflate algorithm (RFC 1951) Compression to compress TCP & UDP packets; typical payload compression of 50% The second card can optionally be fitted with none of the demodulators enabled, thereby keeping the initial purchase price low but allowing for convenient expansion in the future. Demodulators Standard: 4 Options: 8, 12 or 16 (total) All inbound carriers must be within a Operating bandwidth of 72MHz Bandwidth FastLink™ Low-latency LDPC decoder Operating operated in Closed Network mode Mode Data Rate Each inbound: 18kbps to 100Mbps Total for all inbounds combined: Up to 160Mbps 1bps resolution Symbol Rate Each inbound: 18ksps to 40Msps Total for all inbounds combined: Up to 40Msps 1sps resolution Scrambling FastLink™ scrambler IF minimum: Input Range -115 + 10 log (symbol rate) L-band minimum: -130 + 10 log (symbol rate) IF/L-band maximum: -80 + 10 log (symbol rate) Maximum +10dBm Composite Wanted-toIF: -94 + 10 log (symbol rate) Composite L-band: -102 + 10 log (symbol rate) Frequency ±1kHz to ±250kHz Sweep Width (1kHz steps) Dependent on data rate and sweep Acquisition width Time Clock Tracking ±100ppm minimum Range Receive 5%, 10%, 15%, 20%, 25%, 35% Spectral Roll-off LNB 10MHz Via IFL cable; 10MHz ± 0.01 ppm; Reference 0dBm ± 3dB LNB Voltage Selectable 13V, 15V, 18V or 24V DC to LNB via IFL cable; maximum 0.5A 2 OF 5 Ethernet: Standard Features Bridging and Static Routing IPv4/IPv6 VLAN Support DHCP, SNMP Web Server IP Metrics Ethernet MTU Size Trunking mode: Hardware Layer 2 bridge supporting 160Mbps bidirectional traffic (at up to 500,000 packets per second); zero jitter Layer 2 bridge & Layer 3 router: Software processing capability of up to 150,000 packets per second Dual IPV4/IPV6 TCP/IP supporting IPv4/ IPv6 bridging and routing IEEE 802.1q VLAN access & trunking modes DHCP for automatic allocation of M&C IP address. SNMP v1, v2c & v3 Modem web server M&C interface • Time graphs show Tx, Rx throughput (bps, pps); dropped, errored packet counts • Tables show absolute values for throughput (pps, bps), dropped packets, etc. Standard: 10k bytes Optical Ethernet: 16k bytes DVB-S2/S2X VCM TCP Acceleration AAA RADIUS Secure User Login AES-256 Encryption Dynamically varies modcod with varying link conditions in order to maximise throughput for each remote site at all times by converting unused link margin into additional throughput; 100% link availability Supports the transmission up to 16 IP streams. Each stream has its own associated modcod for optimal persite throughput Typical throughput level of 90% of link capacity. Supports 10,000 concurrent accelerated TCP connections (plus at least 40,000 unaccelerated TCP connections) up to 100Mbps Authentication, Authorisation & Accounting. Greater access control & accountability. Replaces standard modem login with user’s personal company network login credentials Provides bi-directional encryption. Remotes can share a common encryption key or each can use a unique key, ensuring different customer data is kept secure. Supported on Q-MultiFlexE™ model only. See separate Q-MultiFlexE™ datasheet 213622 Issued 5 March 2015 Q-MultiFlex™ Point-to-multipoint IP Modulator / Multi-demodulator Paired Carrier™ Option DVB-S2 Performance Paired Carrier™ Eb/No (dB) for Normal (64k) frames at DVB-S2 QEF (Es/No in brackets) (for DVB-S2X performance, see separate datasheet) Paired Carrier data rate options (30kHz to 54MHz occupied bandwidth) Power asymmetry Symbol rate asymmetry Eb/No degradation Mobile Operation Transmit and receive carriers are overlaid in the same space segment. Echo cancellation techniques are used to cancel the unwanted transmit carrier leaving the wanted receive carrier 256kbps, 512kbps, 1024kbps, 2.5Mbps, 5Mbps, 10Mbps, 15Mbps, 20Mbps, 25Mbps, 30Mbps, 40Mbps, 50Mbps, 60Mbps, 80Mbps, 100Mbps and 160Mbps traffic rate -10dB to +10dB Up to 12:1 Typically < 0.5dB up to 0.7dB for 16QAM/16APSK; up to 1dB for 32APSK Uses GPS data to continually recalculate position relative to satellite, allowing uninterrupted operation in mobile environments anywhere in satellite footprint Network Management Standard Web Browser UI Q-NET™ Option Modem Compatibility A built-in web server provides full web browser monitoring and control Q-NET™ is an innovative, scalable bandwidth management system. It supports centralized monitoring and control of all hub and remote units in the system through a single server. See separate Q-NET™ datasheet for more details Q-NET™ and Q-MultiFlex™ are compatible with the use of Q-Flex™ and Q-Lite™ satellite modems Tx Forward Error Correction DVB-S2X Also includes support as listed under ‘DVB-S2’ below DVB-S2X Lowlatency Mode Paradise proprietary extension to DVB-S2X DVB-S2 FastLink™ Low-Latency LDPC 3 OF 5 Normal Frame: QPSK 13/45, 9/20, 11/20 8PSK 23/36, 25/36, 13/18 8APSK-L 5/9, 26/45 16APSK 26/45, 3/5, 28/45, 23/36, 25/36, 13/18, 7/9, 77/90 16APSK-L 5/9, 8/15, 1/2, 3/5, 2/3 32APSK 32/45, 11/15, 7/9 32APSK-L 2/3 64APSK 11/15, 7/9, 4/5, 5/6 64APSK-L 32/45 Short Frame: QPSK 11/45, 4/15, 14/45, 7/15, 8/15, 32/45 8PSK 7/15, 8/15, 26/45, 32/45 16APSK 7/15, 8/15, 26/45, 3/5, 32/45 32APSK 2/3, 32/45 Very Short Frame: (Frame size of 5,400 bits, reducing latency to 33% of standard DVB-S2 Short frame) QPSK/8PSK/16APSK/32APSK 2/5, 7/15, 8/15, 3/5, 2/3, 11/15, 4/5, 13/15, 14/15 Ultra Short Frame: (Frame size of 3,240 bits, reducing latency to 20% of standard DVB-S2 Short frame) QPSK/8PSK/16APSK/32APSK 1/3, 4/9, 5/9, 2/3, 7/9, 8/9 QPSK 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 8PSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 16APSK 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 32APSK 3/4, 4/5, 5/6, 8/9, 9/10 BPSK 0.499 QPSK/OQPSK 0.532, 0.639, 0.710, 0.798 8PSK/8QAM 0.639, 0.710, 0.778 16APSK/16QAM 0.726, 0.778, 0.828, 0.851 32APSK 0.778, 0.828, 0.886, 0.938 64QAM 0.828, 0.886, 0.938, 0.960 Rate 1/4 QPSK 8PSK 16APSK Rate 1/3 Rate 2/5 1.5 (-1.6) 1.1 (-0.7) 1.3 (0.3) Rate 1/2 Rate 3/5 Rate 2/3 1.5 (1.5) 2.1 (2.8) 3.3 (5.8) 2.2 (3.4) 4.0 (7.0) 5.1 (9.3) Rate 3/4 Rate 4/5 Rate 5/6 2.6 (4.3) 3.0 (5.0) 3.1 (5.3) 4.7 (8.2) 5.7 (9.6) 5.8 (10.5) 6.6 (11.6) 7.0 (12.2) Rate 8/9 Rate 9/10 3.8 (6.3) 6.7 (10.9) 7.9 (13.4) 4.1 (6.6) 7.0 (11.3) 8.2 (13.7) 8.2 (13.9) 8.8 (14.8) 9.2 (15.3) 10.1 (16.5) 10.4 (16.9) 32APSK Note: the DVB-S2/S2X performance figures assume a Q-Flex™ or Q-Lite™ is being used as the remote modem to receive the outbound carrier. Rx Forward Error Correction Test Facilities and Alarm Outputs FastLink™ Low-Latency LDPC BER Tester BPSK 0.499 QPSK/OQPSK 0.532, 0.639, 0.710, 0.798 8PSK/8QAM 0.639, 0.710, 0.778 16APSK/16QAM 0.726, 0.778, 0.828, 0.851 32APSK 0.778, 0.828, 0.886, 0.938 64QAM 0.828, 0.886, 0.938, 0.960 FastLink™ Performance Eb/No (dB) at BER 5E-8 (Note: * denotes BER of 5E-12) BPSK 0.499 2.9 (O)QPSK 0.532 2.6 (O)QPSK 0.639 2.8 (O)QPSK 0.710 3.2 (O)QPSK 0.798 3.9 Other test modes Alarm Relays Demodulator-based bit error rate tester, allowing the link from each remote to be tested for data transparency. Supports various test patterns compatible with common BER testers Transmit CW Transmit alternate 1-0 pattern Simulated satellite delay for transmitted TCP/IP packets 4 independent Form C relays for unit, deferred, Tx and aggregated Rx alarms DVB Carrier ID Option (ETSI TS 103 129) Supports the identification of interfering carriers. Allows identification of individual modem carriers by superimposing a low-power CID waveform onto the carrier with negligible degradation. The CID waveform contains a unique Carrier ID and other identity information. A carrier monitoring system is required to decode CID waveforms 8PSK 0.639 5.9* 8PSK 0.710 5.5 8PSK 0.778 6.1 8QAM 0.639 4.8 8QAM 0.710 5.3 Mechanical/Environmental 8QAM 0.778 5.9 Size 16APSK 0.726 7.5* 16APSK 0.778 7.1 16APSK 0.828 8.1 16APSK 0.851 8.3 16QAM 0.726 6.6 16QAM 0.778 7.1 16QAM 0.828 7.7 16QAM 0.851 8.0 32APSK 0.778 9.6 32APSK 0.828 10.6 32APSK 0.886 11.4 32APSK 0.938 13.2 Weight Power Supply Compliances Safety Standards Emissions & Immunity Operating Temperature Humidity 1U chassis, 410mm deep excluding front panel handles and rear panel connectors and fans 3.5kg 90 to 264VAC, 1A @100V, 0.5A @ 240V, 47 to 63Hz Fused IEC connector (live and neutral fused); 24V and 48V DC options FCC, CE and RoHS compliant EN60950-1:2006 Emissions: EN55022:2010 Class B Immunity: EN55024:2010 Standard: 0 to 50ºC (storage: -40ºC to 70ºC) Extended: 0 to 55ºC when fitted with Ruggedisation option 95% relative humidity, noncondensing Built-in Spectrum Analyser showing LinkGuard™ SignalUnder-Carrier interference detection without/with interferer present. 213622 Issued 5 March 2015 Q-MultiFlex™ Point-to-multipoint IP Modulator / Multi-demodulator Option Description Fully configurable - pay only for what you need! Base Unit Four demodulators with FastLink™ Low-latency LDPC Closed Network operation: BPSK, (O)QPSK, 8PSK, 8QAM, 16APSK, 16QAM, 32APSK, 64QAM; maximum aggregate receive data rate of 160Mbps/40Msps; 5%, 10%, 15% 20%, 25%, 35% spectral roll-off factors Two Gigabit Ethernet RJ45s (for M&C and traffic); Ethernet bridge, static routing; IPv4/IPv6; 10k bytes MTU IF demodulator operation 50 to 90MHz & 100 to 180MHz L-band demodulator operation 950 to 2150MHz; high-stability 10MHz reference (for BUC/LNB); FSK LinkGuard™: Signal-under-carrier interference detection web spectrum graph showing received spectrum and any interference underneath the received carriers while on traffic; automated alarm when interference rises above user-set threshold Web browser monitoring tools: Spectrum display, constellation monitor, TCP/IP throughput Internal Bit Error Rate Tester (BERT) Modulator Options DVB-S2/S2X CCM Tx: Modulator transmit function to 160Mbps/50Msps; DVB-S2 QPSK, 8PSK, 16APSK & 32APSK Tx operation per EN 302 307-1. DVB-S2X QPSK, 8PSK, 8APSK, 16APSK, 32APSK & 64APSK Tx operation per EN 302 307-2. Includes 5%, 10%, 15%, 20%, 25% & 35% spectral roll-offs. Includes XStream IP™ Tier 1 (Tx only), which comprises traffic shaping and IP-over-DVB encapsulation DVB-S2X Low-latency Mode (proprietary extension to DVB-S2X): Very Short Frame: Frame size of 5,400 bits, reducing latency to 33% of standard DVB-S2 Short frame; supports QPSK/8PSK/16APSK/32APSK 2/5, 7/15, 8/15, 3/5, 2/3, 11/15, 4/5, 13/15, 14/15 Ultra Short Frame: Frame size of 3,240 bits, reducing latency to 20% of standard DVB-S2 Short frame; supports QPSK/8PSK/16APSK/32APSK 1/3, 4/9, 5/9, 2/3, 7/9, 8/9 Low-cost DVB-S2 CCM Tx: (Reduces cost by providing only DVB-S2 operation.) Modulator transmit function to 160Mbps/50Msps; DVB-S2 QPSK, 8PSK, 16APSK & 32APSK Tx operation per EN 302 307-1. Includes 15%, 20%, 25% & 35% spectral roll-offs Includes XStream IP™ Tier 1 (Tx only), which comprises traffic shaping and IP-over-DVB encapsulation FastLink™ Low-latency LDPC: Modulator transmit function to 100Mbps/40Msps; includes BPSK, QPSK, OQPSK, 8PSK, 8QAM, 16APSK, 16QAM, 32APSK & 64QAM; includes 5%, 10%, 15%, 20%, 25% & 35% spectral roll-offs Demodulator Options 8 demodulators: extends base operation from 4 demodulators to 8 demodulators 12 demodulators: extends operation from 8 demodulators to 12 demodulators 16 demodulators: extends operation from 12 demodulators to 16 demodulators ‘16 Demodulator Ready’ option: one demodulator add-on card is fitted as standard supporting up to 8 demodulators; this option adds a second demodulator card to the unit but with none of the extra demodulators enabled by default in order to keep the initial cost as low as possible. When required, the number of enabled demodulators can be expanded conveniently (to either 12 or 16 demodulators) by entry of a software code without the need for a field hardware upgrade XStream IP™ Options XStream IP™ Tier 1 (Tx only): provided as standard with the Modulator Option; includes: • Traffic Shaping: CIR/BIR/priority settings for IP streams classified by VLAN ID, IP address, IEEE 802.1p priority and Diffserv • IP-over-DVB Encapsulation: transmission of IP packets and Ethernet frames over DVB-S2/S2X using Paradise XStream Encapsulation (PXE) XStream IP™ Tier 2 (Tx only): requires Modulator Option; includes: • DVB-S2/S2X point-to-multipoint VCM (multiple streams in shared outbound, each controlled by its own modcod) • DVB-S2/S2X point-to-multipoint ACM (dynamic adjustment of all outbound modcods to maximize data rate) XStream IP™ Tier 3 (Tx & Rx): applies to Tx and Rx; does not require XStream IP™ Tier 1 or Tier 2 options; supports all enabled demodulators; includes: • Header Compression: IP/UDP/TCP/RTP packet header compression (RFC 3095) plus Ethernet header compression • Payload Compression: TCP/UDP packet payload compression using the Deflate algorithm (RFC 1951) • TCP Acceleration: Supports up to 10,000 concurrent accelerated TCP connections at up to 100Mbps • AAA RADIUS Secure User Login: Authentication, Authorisation & Accounting. Greater access control & accountability. Replaces standard modem login with user’s personal company network login credentials • AES-256 Encryption: Please note that AES-256 Encryption (TCP/IP packet payload encryption using AES with 256-bit keys) is supported on the Q-MultiFlexE™ model only. The Q-MultiFlexE™ is identical to the standard Q-MultiFlex™ in every other respect 4 OF 5 Configuration options continue on next page. 213622 Issued 5 March 2015 Q-MultiFlex™ Point-to-multipoint IP Modulator / Multi-demodulator Option Description Fully configurable - pay only for what you need! Paired Carrier™ Paired Carrier™ add-on card P3607 (requires one or more options below) Subject to prevailing data rate limits. Paired Carrier™ up to 256kbps (requires Paired Carrier™ add-on card) Occupied bandwidth: minimum 30kHz; maximum 54MHz Extends Paired Carrier™ up to 1.024Mbps Extends Paired Carrier™ up to 512kbps Extends Paired Carrier™ up to 2.5Mbps Extends Paired Carrier™ up to 5Mbps Extends Paired Carrier™ up to 10Mbps Extends Paired Carrier™ up to 15Mbps Extends Paired Carrier™ up to 20Mbps Extends Paired Carrier™ up to 25Mbps Extends Paired Carrier™ up to 30Mbps Paired Carrier™ is also available as a low-cost 90 -day per annum license for redundancy system standby equipment please contact Sales for details Terrestrial Interfaces Extends Paired Carrier™ up to 40Mbps Extends Paired Carrier™ up to 50Mbps Extends Paired Carrier™ up to 60Mbps Extends Paired Carrier™ up to 80Mbps Extends Paired Carrier™ up to 100Mbps Extends Paired Carrier™ up to 160Mbps 4-port Gigabit Ethernet Switch: Extends base unit Ethernet traffic port with 3 Ethernet ports, creating 4-port switch Optical Gigabit Ethernet: Small Form-factor Pluggable module; supports single-mode & multi-mode fibre & all wavelengths; supports all standard fibre connector types such as SC & LC (subject to provision of suitable mating socket for SFP cage) Ruggedisation Ruggedises the equipment for harsh environments (fans with higher airflow, heatsinks on key components, etc.) DVB-CID DVB Carrier ID: Tx carrier identification per ETSI 103 129 Packet Synchronisation Supports IEEE 1588 Precision Time Protocol Version 2, plus Simple Network Time Protocol 24V DC Input K3023 24V DC primary power input (in place of 100 to 240V AC input); DC input attaches via a screw-terminal connector plate 48V DC Input K3018 48V DC primary power input (in place of 100 to 240V AC input); DC input attaches via a screw-terminal connector plate 24V 200W BUC PSU P3543 AC input, 24V 200W DC to Tx BUC 48V 200W BUC PSU P3544 AC input, 48V 200W DC to Tx BUC 48V In & 24V BUC PSU P3545 Floating 48V DC input; +24V 200W DC to Tx BUC; DC input attaches via a screw-terminal connector plate 48V In & 48V BUC PSU P3546 Floating 48V DC input; +48V 200W DC to Tx BUC; DC input attaches via a screw-terminal connector plate +48V In & 48V BUC PSU P3547 +48V DC input; +48V 200W DC to Tx BUC; DC input attaches via a screw-terminal connector plate Teledyne Paradise Datacom reserves the right to change specifications of products described in this document at any time without notice and without obligation to notify any person of such changes. Refer to the website or contact Sales or Customer Support for the latest product information. The information contained herein is classified EAR99 under the U.S. Export Administration Regulations. The modem itself is classified ECCN 5A991.b.4 and is subject to U.S. Department of Commerce export control. Export re-export or diversion contrary to U.S. law is prohibited. 5 OF 5 213622 Issued 5 March 2015