SOT223-3
Voltage Regulator
Evaluation Board
User’s Guide
© 2008 Microchip Technology Inc.
DS51779A
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, rfPIC, SmartShunt and UNI/O are registered
trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
FilterLab, Linear Active Thermistor, MXDEV, MXLAB,
SEEVAL, SmartSensor and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, In-Circuit Serial
Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, PICkit, PICDEM,
PICDEM.net, PICtail, PIC32 logo, PowerCal, PowerInfo,
PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total
Endurance, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2008, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS51779A-page ii
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 1
Introduction............................................................................................................ 1
Document Layout .................................................................................................. 1
Conventions Used in this Guide ............................................................................ 2
Recommended Reading........................................................................................ 3
The Microchip Web Site ........................................................................................ 3
Customer Support ................................................................................................. 3
Document Revision History ................................................................................... 3
Chapter 1. Product Overview
1.1 Introduction ..................................................................................................... 5
1.2 What is the SOT223-3 Voltage Regulator Evaluation Board? ........................ 5
1.3 What the SOT223-3 Voltage Regulator Evaluation Board kit includes? ........ 6
Chapter 2. Installation and Operation
2.1 Introduction ..................................................................................................... 7
2.2 Features ......................................................................................................... 7
2.3 Getting Started ............................................................................................... 7
Appendix A. Schematic and Layouts
A.1 Introduction .................................................................................................... 9
A.2 Board - Schematic ....................................................................................... 10
A.3 Board - Top Copper Layout ......................................................................... 11
A.4 Board - Bottom Copper Layout .................................................................... 12
A.5 Board - Top Silk Layout ............................................................................... 13
Appendix B. Bill of Materials (BOM)
Worldwide Sales and Service .................................................................................... 16
© 2008 Microchip Technology Inc.
DS51779A-page iii
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
NOTES:
DS51779A-page iv
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB® IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
SOT223-3 Voltage Regulator Evaluation Board. Items discussed in this chapter
include:
•
•
•
•
•
•
Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Web Site
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use the SOT223-3 Voltage Regulator Evaluation
Board as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the SOT223-3
Voltage Regulator Evaluation Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with this evaluation board and a description of the evaluation board
operation.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the SOT223-3 Voltage Regulator Evaluation Board.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the
SOT223-3 Voltage Regulator Evaluation Board.
© 2008 Microchip Technology Inc.
DS51779A-page 1
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description
Arial font:
Italic characters
Represents
Referenced books
Emphasized text
A window
A dialog
A menu selection
A field name in a window or
dialog
A menu path
MPLAB® IDE User’s Guide
...is the only compiler...
the Output window
the Settings dialog
select Enable Programmer
“Save project before build”
A dialog button
A tab
A number in verilog format,
where N is the total number of
digits, R is the radix and n is a
digit.
A key on the keyboard
Click OK
Click the Power tab
4‘b0010, 2‘hF1
Italic Courier New
Sample source code
Filenames
File paths
Keywords
Command-line options
Bit values
Constants
A variable argument
Square brackets [ ]
Optional arguments
Curly brackets and pipe
character: { | }
Ellipses...
Choice of mutually exclusive
arguments; an OR selection
Replaces repeated text
#define START
autoexec.bat
c:\mcc18\h
_asm, _endasm, static
-Opa+, -Opa0, 1
0xFF, ‘A’
file.o, where file can be
any valid filename
mcc18 [options] file
[options]
errorlevel {0|1}
Initial caps
Quotes
Underlined, italic text with
right angle bracket
Bold characters
N‘Rnnnn
Text in angle brackets < >
Courier New font:
Plain Courier New
Represents code supplied by
user
DS51779A-page 2
Examples
File>Save
Press <Enter>, <F1>
var_name [,
var_name...]
void main (void)
{ ...
}
© 2008 Microchip Technology Inc.
Preface
RECOMMENDED READING
This user's guide describes how to use SOT223-3 Voltage Regulator Evaluation Board.
Other useful documents are listed below. The following Microchip documents are available and recommended as supplemental reference resources.
• MCP1790 Data Sheet, “70 mA, High Voltage Regulator” (DS-22075)
• MCP1824 Data Sheet, “300 mA, Low Voltage, Low Quiescent Current
LDO Regulator” (DS-22070)
• MCP1825 Data Sheet, “500 mA, Low Voltage, Low Quiescent Current
LDO Regulator” (DS-22056)
• MCP1826 Data Sheet, “1000 mA, Low Voltage, Low Quiescent Current
LDO Regulator” (DS-22057)
These datasheets provide useful information regarding voltage regulator parameters
that may be validated using this evaluation board.
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at www.microchip.com. This web
site is used as a means to make files and information easily available to customers.
Accessible by using your favorite Internet browser, the web site contains the following
information:
• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents,
latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip
press releases, listing of seminars and events, listings of Microchip sales offices,
distributors and factory representatives
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
•
•
•
•
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: http://support.microchip.com
DOCUMENT REVISION HISTORY
Revision A (November 2008)
• Initial Release of this Document.
© 2008 Microchip Technology Inc.
DS51779A-page 3
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
NOTES:
DS51779A-page 4
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Chapter 1. Product Overview
1.1
INTRODUCTION
The SOT223-3 Voltage Regulator Evaluation Board is designed to provide functional
evaluation of Microchip Voltage Regulators that utilize the SOT223-3 package and the
following device pinout:
- Pin 1 = VIN
- Pin 2 = GND
- Pin 3 = VOUT
The SOT223-3 Voltage Regulator Evaluation Board does not come with a voltage
regulator soldered onto the board. This allows the user to attach the voltage regulator
of their choosing to the board and perform quiescent current, ground current, PSRR,
and other desired tests.
The SOT223-3 Voltage Regulator Evaluation Board is based upon a modulare concept
which will allow the user to plug in additional boards to increase the test capability of
the voltage regulator. Planned additional modulare plugin boards currently consist of
an Input Voltage Linestep Board, Output Voltage Loadstep Board, and several other
device packages.
1.2
WHAT IS THE SOT223-3 VOLTAGE REGULATOR EVALUATION BOARD?
The SOT223-3 Voltage Regulator Evaluation Board is designed to evaluate and test
voltage regulators. By soldering the desired device to the evaluation board, the user
can easily validate several parameters of the device.
1.2.1
Funtional Blocks
The SOT223-3 Voltage Regulator Evaluation Board can be broken up into 3 functional
blocks. These blocks are as follows:
• Input Capacitance
• Ground Current Measurement
• Load Resistor
1.2.2
Input Capacitance
Jumper JP1 connects the input capacitance to the circuit. The input capacitor is
disconnected when performing Power Supply Ripple Rejection tests. By default, C1 is
populated with a 1 µF, 50V, XR7 ceramic capacitor.
1.2.3
Ground Current Measurement
Jumper JP3 allows measurement of ground current. When a current meter is
connected to TP6 and TP7 and jumper JP3 is removed, the ground current of the
device may be measured.
© 2008 Microchip Technology Inc.
DS51779A-page 5
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
1.2.4
Load Resistor
R5 and R6 may be populated with the desired load resistor values for the device being
evaluated. JP4 connects R5 to the device output, JP5 connects R6 to the device
output.
1.2.5
Output Capacitor
C2 may be populated with the desired surface mount output capacitance. By default,
C2 is populated with a 1 µF, 6.3V, XR7 ceramic capacitor.
C3 may be populated with an electrolytic or tantalum capacitor having a radial lead
spacing of 0.100”.
1.2.6
Power Supply
J1 or TP1 and TP2 are connected to the user’s power supply.
1.3
WHAT THE SOT223-3 VOLTAGE REGULATOR EVALUATION BOARD KIT
INCLUDES?
This SOT223-3 Voltage Regulator Evaluation Board kit includes:
• SOT223-3 Voltage Regulator Evaluation Board (102-00199)
• Analog and Interface Products Demonstration Boards CD-ROM includes:
- SOT223-3 Voltage Regulator Evaluation Board User’s Guide (DS51779)
DS51779A-page 6
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Chapter 2. Installation and Operation
2.1
INTRODUCTION
The SOT223-3 Voltage Regulator Evaluation Board is designed to facilitate evaluation
of Microchip’s voltage regulators or to be used as a stand-alone voltage regulator
board. Jumpers have been placed on the board to ease the test of the specific voltage
regulator parameters.
The SOT223-3 Voltage Regulator Evaluation Board kit comes with a 1 μF ceramic input
and output capacitor soldered to the board. The board has two unpopulated resistor
locations that may be used for loads.
2.2
FEATURES
The SOT223-3 Voltage Regulator Evaluation Board has the following features:
• Input and Output headers for future connection to Line Step and Load Step
modules
• Ample testpoints to attach multimeters, power supplies, and loads
• Jumper to select ground current measurement
• Jumper to select two different load resistors
• Jumper to connect input capacitor to circuit
2.3
GETTING STARTED
The SOT223-3 Voltage Regulator Evaluation Board is fully assembled and tested. For
operating, a user supplied voltage regulator and a supply voltage source are required.
Some of the tests that may be completed using the SOT223-3 Voltage Regulator
Evaluation Board are described in the next subchapters.
2.3.1
Ground Current and Quiescent Current
When measuring ground current, jumper JP3 should be removed, otherwise leave
jumper JP3 on. To measure ground current, perform the following steps:
1. Add desired load resistors to R5 and R6.
2. Remove jumpers JP3, JP4, and JP5.
3. Connect an ammeter across testpoints TP6(+) and TP7(-). Select the
appropriate meter scale for the device that is being evaluated.
4. Connect a voltmeter across testpoints TP9(+) and TP10(-).
5. Add jumper JP1.
6. Apply source voltage to testpoints TP1(+) and TP2(-).
7. Verify that the voltage across testpoints TP9 and TP10 is within the expected
range of the tested device.
8. Read the Ground Current directly from the ammeter connected to the testpoints
TP6 and TP7.
9. Vary the input voltage to obtain data for ground current versus input voltage. If no
load is attached to the output of the voltage regulator, the measured “ground
current” is also called the “quiescent current” of the regulator.
© 2008 Microchip Technology Inc.
DS51779A-page 7
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
10. Add a load selection jumper, JP4 or JP5.
11. Read the Ground Current directly from the ammeter connected to the testpoints
TP6 and TP7.
12. The data collected will be the “ground current” versus load current.
2.3.2
Load Resistance
R5 and R6 are used to set the desired load values. One choice is to set R5 to the
minimum current wanted for testing. R6 would then be set to a value appropriate for the
specific tests. Either value may be selected by adding their respective jumpers.
2.3.3
Line Step
Dynamic Line Step response may be evaluated by connecting an electronically
switched input voltage to testpoints TP1(+) and TP2(-) or to connector J1.
An oscilloscope is connected to TP3 (Ch1 Trigger), TP9 (Ch2) and TP10 (Gnd). An
appropriate load is selected using R5 and JP4 or R6 and JP5. The input voltage is then
electronically switched from a low voltage to a higher one. The corresponding voltage
waveform data of the voltage regulator response is captured by the oscilloscope.
Microchip will be offering a Line Step module that connects directly to connector J1.
The Line Step module will be capable of switching between two voltage levels that the
user supplies.
2.3.4
Load Step
Dynamic Load Step response may be evaluated by connecting an electronically
switched load to testpoints TP9(+) and TP10(-), or to connector P1. An oscilloscope is
connected to the electronic load switch signal (Ch1 Trigger), to TP9 (Ch2) and
TP10(Gnd). The load is then electronically switched from a high resistance to a low
resistance. The corresponding voltage waveform data of the voltage regulator
response is captured by the oscilloscope. Microchip will be offering a Load Step module
that connects directly to connector P1. The Load Step module has several selectable
load values populated on board to cover a wide range of loads. The load has the ability
to be electronically or manually switched.
2.3.5
Power Supply Rejection Ratio (PSRR)
Power Supply Rejection Ratio tests are performed by removing the input capacitor
jumper, JP1, and connecting an appropriate PSRR analyzer to the SOT223-3 Voltage
Regulator Evaluation Board. The PSRR analyzer may then sweep the input voltage
frequencies and record the corresponding output voltages.
DS51779A-page 8
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Appendix A. Schematic and Layouts
A.1
INTRODUCTION
This appendix contains the following schematis and layouts for the SOT223-3 Voltage
Regulator Evaluation Board:
•
•
•
•
Board - Schematic
Board - Top Copper Layout
Board - Bottom Copper Layout
Board - Top Silk Layout
© 2008 Microchip Technology Inc.
DS51779A-page 9
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
1
REV
Revision Notes
Initial Release
Date
BOARD - SCHEMATIC
18-FEB-2008
A.2
DS51779A-page 10
© 2008 Microchip Technology Inc.
Schematic and Layouts
A.3
BOARD - TOP COPPER LAYOUT
© 2008 Microchip Technology Inc.
DS51779A-page 11
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
A.4
BOARD - BOTTOM COPPER LAYOUT
DS51779A-page 12
© 2008 Microchip Technology Inc.
Schematic and Layouts
A.5
BOARD - TOP SILK LAYOUT
© 2008 Microchip Technology Inc.
DS51779A-page 13
SOT223-3 Voltage Regulator Evaluation Board User’s Guide
NOTES:
DS51779A-page 14
© 2008 Microchip Technology Inc.
SOT223-3 VOLTAGE REGULATOR
EVALUATION BOARD USER’S GUIDE
Appendix B. Bill of Materials (BOM)
TABLE B-1:
Qty
BILL OF MATERIALS (BOM)
Reference
Description
Manufacturer
Part Number
1
C1
CAP CERAMIC 1.0 μF 50V X7R 0805
Murata Electronics®
GRM21BR71H105KA12L
1
C2
CAP CERAMIC 1.0 μF 16V X7R 0805
Kemet® Electronics
Corp.
C0805C105K4RACTU
1
C3
DO NOT POPULATE
–
–
1
J1
2 pin RA header, 0.100 centers, 0.025 sq 3M
pins, 0.070 pcb to pin center height,
36 pins to a strip (yields 18 headers)
4
JP1, JP3,
JP4, JP5
2 pin header, 0.100 centers,
0.025 sq pins, 0.070 pcb to pin center
height, 36 pins to a strip
(yields 18 headers)
Molex® Electronics
22-28-4360
4
JP1, JP3,
JP4, JP5
Connector, Shorting jumper, Tin, 0.100”
Sullins
STC02SYAN
1
P1
RA socket, 0.100 centers, 0.025 sq pins,
0.070 pcb to pin center height
Sullins
PPPC021LGBN-RC
2
PCB
RoHS Compliant Bare PCB, SOT223-3
Voltage Regulator Eval Board
Microchip Technology 104-00199
Inc.
2
R5, R6
DO NOT POPULATE
–
–
8
TP1, TP2,
TP3, TP4,
TP6, TP7,
TP9, TP10
SMT Testpoint
Keystone
Electronics®
5016
1
U1
DO NOT POPULATE
–
–
4
Each Corner Bumpon Hemisphere 0.44 x 0.20 Clear
3M
SJ-5303 (Clear)
Note 1:
929835-01-36-RK
The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM
used in manufacturing uses all RoHS-compliant components.
© 2008 Microchip Technology Inc.
DS51779A-page 15
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-4182-8400
Fax: 91-80-4182-8422
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
01/02/08
DS51779A-page 16
© 2008 Microchip Technology Inc.