ICP2 Family Programmers 1. Features ICP2-PORTABLE ICP2-GANG ICP2 ICP2(HC) Primary use Service Mass production Heavy mass production High-current targets 2. Dimensions, mm 130x65x26 175x85x35 195x110x68 175x85x35 3. Number of channels 1 1 4 (daisy chain capability up to 64 channels) 1 4. Target connector D-type 15F D-type 15F D-type 15F x 4 D-type 15F 5. Battery powered (AAAx3) Yes - - - 6. USB powered Yes Yes (VDD current is limited to 40mA) - - 7. Power adapter voltage 9V, 12V, 15V 12V 12V 12V 8. Communication interface USB USB, RS-232 USB, RS-232 USB, RS-232 9. VDD current, max 50mA 250mA 250mA (per channel) 1000mA 10. VPP current, max 10mA 25mA 25mA 100mA 11. Clock/data current, max 5mA 5mA 5mA 100mA 12. Flash memory size 4MByte 1MByte 1MByte 1MByte 13. GO/PASS/FAIL wired interface Contact Softlog Systems Yes Yes Yes 14. Programmable VDD 2-5.5V 2-5.5V 2-5.5V 2-5.5V 15. Programmable VPP 2-13.5V 2-13.5V 2-13.5V 2-13.5V 16. Programmable clock/data speed 500KHz-10MHz 500KHz-10MHz 500KHz-10MHz 500KHz-10MHz 17. Secure programming Counter limit only Optional Optional Optional 18. Standalone programming Yes Yes Yes Yes 19. Number of environments 6 1 1(per channel) 1 20. Standalone serialization Yes Yes Yes Yes How To Order 1 - 2 3 4 5 6 1: Programmer P/N: ICP2PORT = ICP2-PORTABLE ICP2 = ICP2 ICP2GANG = ICP2-GANG ICP2(HC) = ICP2(HC) 2: D = DLL/Command Line Support 3: P = dsPIC/PIC24 (16-bit) Support 4: S = Secure Programming Support 5: K = Keeloq Support 6: X = PIC32 Support Examples: ICP2GANG-DS = ICP2-GANG programmer with DLL/Command Line Support and Secure Programming Support ICP2PORT-P = ICP2-PORTABLE programmer with dsPIC/PIC24 (16-bit) Support Channels Battery Powered Box Size, mm Drive Capability DLL/ Command Line Support (D) dsPIC/ PIC24 (16-bit) Support (P) Secure Programming Support (S) Keeloq Support (K) PIC32 Support (X) ICP2 1 - 175x85x35 Normal - - - - - TPG10002 ICP2-DP 1 - 175x85x35 Normal Yes Yes - - - 3. TPG10004 ICP2GANG-DP 4 - 195x110x68 Normal Yes Yes - - - 4. TPG10005 ICP2GANG 4 - 195x110x68 Normal - - - - - 5. TPG10006 ICP2GANG-DS 4 - 195x110x68 Normal Yes - Yes - - 6. TPG10007 ICP2-DS 1 - 175x85x35 Normal Yes - Yes - - 7. TPG10008 ICP2(HC) 1 - 175x85x35 High - - - - - 8. TPG10009 ICP2PORT 1 Yes 130x65x26 Base - - - - - 9. TPG10010 ICP2PORT-P 1 Yes 130x65x26 Base - Yes - - - Microchip P/N Softlog P/N 1. TPG10001 2. Notes: - Support for 8-bit microcontrollers is included in all programmers - Any Support (D/P/S/K/X) may be activated remotely – contact Softlog Systems for details Softlog Systems (2006) Ltd. 18 Rojansky St, P.O.Box 17007 Rishon-Letzion 75070 Israel Tel: 972-3-9515359 Fax: 972-3-9527520 email: [email protected] www.softlog.com