SHD307901P SHD307901N SHD307901D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4983, REV. – HERMETIC ULTRAFAST RECTIFIER DUAL - COM. CATHODE / COM. ANODE / DOUBLER DESCRIPTION: 600 VOLT, 45AMP, 90 NS HERMETIC RECTIFIER IN A TO-259AA PACKAGE. MAX RATINGS/ELECTRICAL CHARACTRISTIC ALL RATINGS ARE AT TA = 25 C) UNLESS OTHERWISE SPECIFIED RATING PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM FORWARD VOLTAGE DROP @ TA = 25° C SYMBOL MAX. UNITS PIV 600 Volts Vf 1.7 Volts (PER LEG) COMMON CATHODE (P) COMMON ANODE (N) / DOUBLER (D) 2.0 (If = 22 Amps) MAXIMUM FORWARD VOLTAGE DROP @ TA = 25° C (PER LEG) COMMON CATHODE (P) Vf COMMON ANODE (N) / DOUBLER (D) 2.0 Volts 2.3 (If = 45 Amps) MAXIMUM FORWARD VOLTAGE DROP @ TA = 125° C (PER LEG) COMMON CATHODE (P) Vf COMMON ANODE (N) / DOUBLER (D) 1.5 Volts 1.8 (If = 22 Amps) MAXIMUM DC OUTPUT CURRENT PER PACKAGE (TC = 100 OC) IO 45 Amps IFSM 225 Amps trr 90 nsec IRM 9 A QRR 405 nC MAXIMUM REVERSE CURRENT Irr @ 600V (PER LEG) @ TA = 25°C Irr 10 µA MAXIMUM REVERSE CURRENT Irr @ 480V (PER LEG) @ TA = 125°C Irr 1 mA MAXIMUM THERMAL RESISTANCE (PER LEG) RθJC 1.2 °C/W MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top/stg -65 to +150 °C PEAK SINGLE CYCLE SURGE CURRENT PER LEG tp = 8.3 msec MAXIMUM REVERSE RECOVERY TIME If = 22A, di/dt = 200A/µs, VR = 200V MAXIMUM REVERSE RECOVERY CURRENT If = 22A, di/dt = 200A/µs, VR = 200V MAXIMUM REVERSE RECOVERY CHARGE If = 22A, di/dt = 200A/µs, VR = 200V • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] • SHD307901P SHD307901N SHD307901D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4983, REV. - MECHANICAL DIMENSIONS: In Inches / mm 1.195 (30.35 1.185 30.10) .940(23.88) BSC 2 Places .695 (17.65 .685 17.40) .470(11.94) .149 (3.78 Dia. Typ. .139 3.53) .270 (6.86 .240 6.10) .045 (1.14 .035 0.89) 1 2 3 1 2 3 SINGLE COMMON CATHODE .550 (13.97 .530 13.46) .250(6.35) 2 Places 1 2 3 1 2 3 1 COMMON ANODE .750 (19.05 .500 12.70) .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) .140(3.56) BSC PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE 2 3 DOUBLER TO-259 PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Ordering options: For ceramic eyelets, please order SHDC307901x. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] •