Manufacturer/ Distributor: Panasonic Industrial Devices SUNX Co.,Ltd. RTEX PLC Positioning Unit RTEX Application Sample Coil winding machine (Synchronized operation) Lens Polish machine ●Inspection machine for electronic device ●Heavy LCD panel handling (synchronized operation) ●Others ● AFPG43610, etc. ● Compact PLC is easier to operate to control network servo MINAS A4N/A5N. (Units of Ver.1.3 or later will support A5N.) ●High speed 100 Mbps communications enable high precision arc/linear/spiral interpolation. ●2-axis, 4-axis and 8-axis units are lined up and can be used to configure system of up to 16 axes with FPΣ and 256 axes with FP2SH. ●User-friendly tool software [Configurator PM] provides strong support for setup, start and monitor. ●Max. No. of position command points is 600/axis and max. position command rate is 32 Mpps, assuring margin of performance. ●Manual pulser input is provided to enable fine teaching. ● RTEX Features System Configuration Pulsar Configurator PM FPΣ (RTEX) FPΣ No. of control axes Limit Switch AFPG43610/AFP243610 AFPG43620/AFP243620 AFPG43630/AFP243630 2-axis (2 axes × 1 system) 4-axis (4 axes × 1 system) 8-axis (8 axes × 1 system) Control method Interpolation control Sales area and Language • Japanese • English pulse/ μm/ inch/ degree 600 points/axis Backup Parameter and data table can be stored to FROM. Linear acceleration/deceleration and S-curve acceleration/deceleration Accelerating/ decelerating time 0 to 10000 ms (in unit of 1 ms) Positioning range Signed 32-bit (–1073741823 to 1073741823 pulses) increment, absolute designation Velocity control function With JOG operation (infinite feed operation) Torque control function With real time torque limit function Origin return Limit Switch 2-axis, 3-axis linear interpolation, 2-axis arc interpolation, 3-axis spiral interpolation Positioning data Accelerating/ decelerating method DOG DOG Sensor PTP control, trajectory (CP) control Control unit Position control function FPΣ (CPU) FP2SH Specification Part No. (FPΣ/FP2SH) ・Axis setting ・Parameter setting ・Data table setting ・Tool operation ・Data monitor and Status monitor Searching method Creep velocity Other * MINAS A4N and A5N cannot be mixed in a system. For more information FPΣ URL : http://www3.panasonic.biz/ac/e/fasys/plc/plc/fpg/index.jsp FP2SH URL : http://www3.panasonic.biz/ac/e/fasys/plc/plc/fp2sh/index.jsp URL : http://panasonic.net/id/pidsx/global Near home (DOG) search, limit search, Z phase search, hit and stop Setting is optional Pulser input operation/ auxiliary output code, auxiliary output contact/ dwell time/ in position contact/ 2-axis synchronization operation Contact: Panasonic Industrial Devices SUNX Co.,Ltd. 2431-1, Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan TEL: +81-568-33-7861 FAX: +81-568-33-8591