151

SHD326211
SHD326211P
SHD326211N
SHD326211D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 151, REV G
Formerly Part Number SHD3262/P/N/D
HERMETIC DUAL ULTRAFAST RECTIFIER
DESCRIPTION: A 200 VOLT, 16 AMP, 30 NANOSECOND, RECTIFIER IN A HERMETIC TO-257 PACKAGE.
Ceramic Seals available (Add a “C” to the part number, i.e. SHDC326211)
MAXIMUM RATINGS
ALL RATINGS ARE AT TA = 25 C) UNLESS OTHERWISE SPECIFIED
RATING
SYMBOL
MAX.
UNITS
PIV
200
Volts
IO
16
Amps
IFSM
180
Amps
MAXIMUM THERMAL RESISTANCE (PER LEG)
RJC
2.8
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top/stg
-65to
+175
C
SYMBOL
MAX.
UNITS
1.0
Volts
PEAK INVERSE VOLTAGE (PER LEG)
O
MAXIMUM DC OUTPUT CURRENT (TC = 100 C)
PEAK SINGLE CYCLE SURGE CURRENT
tp = 8.3 msec
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP @ TA = 25C (PER LEG)
Vf
If = 10 Amps
If = 16 Amps
1.1
MAXIMUM FORWARD VOLTAGE DROP @ If = 16 Amps
TA = 125C (PER LEG)
Vf
1.0
1.3
Volts
MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 25C
Irr
25
A
MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) @ TA = 125C
Irr
1.0
mA
MAXIMUM REVERSE RECOVERY TIME
trr
30
nsec
TA = -55C (PER LEG)
(If = 0.5A, Ir = 1.0A, Irr = 0.25A)
©2015 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
SHD326211
SHD326211P
SHD326211N
SHD326211D
SENSITRON
TECHNICAL DATA
DATA SHEET 151, REV G
MECHANICAL DIMENSIONS: In Inches / mm
.150
(3.81
.140
3.56)
1.132
(28.75
1.032
26.21)
Dia.
.537
(13.64
.527
13.39)
1
.035
2
.420
(10.67
.410
10.41)
.665
(16.89
.645
16.38)
.430
(10.92
.410
10.41)
.200
(5.08
.190
4.82)
.045
(1.14
.035
0.89)
3
(0.89
.025 0.63)
3 Places
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
DUAL RECTIFIER/COMMON CATHODE (P)
DUAL RECTIFIER/COMMON ANODE (N)
DUAL RECTIFIER/DOUBLER (D)
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/ CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2015 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]