4155

SENSITRON
SEMICONDUCTOR
SHD375611
SHD375611B
TECHNICAL DATA
DATA SHEET 4155, REV. B
HERMETIC POWER ULTRAFAST RECTIFIER
DESCRIPTION: A 200 VOLT, 40 AMP, 35 NANOSECOND POWER ULTRAFAST RECTIFIER IN A
HERMETIC HIGH PROFILE SHD-2 / 2B PACKAGE.

ADD AN “S” TO THE END OF THE PART NUMBER FOR S-100 SCREENING
MAXIMUM RATINGS
ALL RATINGS ARE @ TA = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
200
Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
IO
40
Amps
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
RJC
0.60
C/W
Top/Tstg
-65 to
+175
C
SYMBOL
MAX.
UNITS
Vf
1.05
Volts
Irr
100
A
trr
35
ns
PEAK INVERSE VOLTAGE
O
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTRISTICS
CHARACTRISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed
MAXIMUM REVERSE CURRENT
MAXIMUM REVERSE RECOVERY TIME
TC = 25 C (If = 40 Amps)
TC = 25 C
©2014 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]
SHD375611
SHD375611B
SENSITRON
TECHNICAL DATA
DATA SHEET 4155, REV B
MECHANICAL DIMENSIONS: In Inches / mm
SHD-2 high profile
SHD-2B high profile
©2014 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]
SHD375611
SHD375611B
SENSITRON
TECHNICAL DATA
DATA SHEET 4155, REV B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the
latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the
datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting
from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application
will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any
third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws
and regulations.
©2014 Sensitron Semiconductor  221 WEST INDUSTRY COURT  DEER PARK, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798 www.sensitron.com  [email protected]