SHD325916P SHD325916N SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5146, REV. - HERMETIC ULTRAFAST RECOVERY RECTIFIER (equivalent to 1N6674 / 1N6674R) DESCRIPTION: 500 VOLT, 30 AMP, 15 NANOSECOND, RECTIFIER IN A HERMETIC TO-254 PACKAGE. MAX RATINGS/ELECTRICAL CHARACTERISTICS ALL RATINGS ARE AT TA = 25 °C UNLESS OTHERWISE SPECIFIED. RATING PEAK INVERSE VOLTAGE (PER LEG) SYMBOL MAX. UNITS PIV 500 Volts Vf 1.35 Volts MAXIMUM FORWARD VOLTAGE DROP (PER LEG) IF = 10A, TA = 25 C° 1.55 IF = 20A, TA = 25 C° MAXIMUM DC OUTPUT CURRENT (TC = 100 °C) (PER LEG) IO 15 Amps IFSM 150 Amps MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1.0A, Irr = 0.25A) trr 35 nsec MAXIMUM REVERSE CURRENT Ir @ PIV (TC = 100°C) (PER LEG) Ir 50 μA 5.0 mA PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. MAXIMUM THERMAL RESISTANCE (PER LEG) RθJC 2.0 °C/W MAXIMUM OPERATING TEMPERATURE RANGE TOP -65 to +175 °C JUNCTION CAPACITANCE VR = 10Vdc, f = 1MHz CJ 150 pF VSIG = 50mV (p-p) (Max) • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX( 631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-mail Address - [email protected] • SHD325916P SHD325916N TECHNICAL DATA DATA SHEET 5146, REV. MECHANICAL DIMENSIONS: In Inches / mm .149 (3.78 Dia. .139 3.53) TO-254 (6.60 6.32) (1.27 1.02) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .260 .249 .050 .040 .545 (13.84 .535 13.60) 1 2 .045 (1.14 .035 0.89) 3 Places 3 .150(3.81) BSC .150(3.81) BSC 2 Places PINOUT TABLE TYPE DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) PIN 1 ANODE 1 CATHODE 1 PIN 2 COMMON CATHODE COMMON ANODE PIN 3 ANODE 2 CATHODE 2 SCHEMATIC COMMON CATHODE COMMON ANODE 1 1 2 3 2 3 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX( 631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-mail Address - [email protected] •