SPECIFICATION SHEET JFW MODEL 50S-1603+XX-TTL 1P2T FAILSAFE SELF TERMINATING ELECTROMECHANICAL RF SWITCH JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com Frequency Range DC-18 GHz Configuration 1P2T Failsafe Self Terminating Impedance 50 Ohms nominal VSWR 1.2:1 1.3:1 1.4:1 1.5:1 Insertion Loss 0.2 0.3 0.4 0.5 Isolation 70 65 60 60 Switching Speed 20 milliseconds RF Input Power* 500 Watts average DC-100 MHz 400 Watts average 100-200MHz 300 Watts average 200-500MHz 200 Watts average 500-1000MHz 100 Watts average 1-4 GHz 90 Watts average 4-8 GHz 70 Watts average 8-12 GHz 60 Watts average 12-18 GHz *2 Watts average for self terminations DC Supply +XX is either +12, +15,+24 or +28: --------------------------------+12Vdc @ 450 mA nominal (11-14Vdc) +15Vdc @ 400 mA nominal (13-17Vdc) +24Vdc @ 225 mA nominal (20-28Vdc) +28Vdc @ 200 mA nominal (24-32Vdc) dB dB dB dB dB dB dB dB maximum maximum maximum maximum maximum maximum maximum maximum minimum minimum minimum minimum DC-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz DC-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz DC-4 GHz 4-8 GHz 8-12 GHz 12-18 GHz Unit if fail-safe NC to COM +Vdc on control pin for NO to COM Control (1 line) TTL "Low" for Com to NC (failsafe) TTL "High" for Com to NO "low" (0-0.8Vdc) "high" (2.0-5.0Vdc) RF Connector SMA female Operating Temperature Range -25ºC to +65ºC Lifetime (typical) 5 million operations --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1603+XX-TTL 1P2T FAILSAFE SELF TERMINATING ELECTROMECHANICAL RF SWITCH Physical Size See outline drawing 092-4298 Add (-NR) for NON-RoHS version. (I.e. 50S-1603+12-TTL-NR SMA) ECR/ECN # DATE REV 04/17/2007 Page 2 of 2 APPR / DATE ECR/ECN # CLK 04/17/2007 16223 08/15/2008 A CLK 08/15/2008 24842 01/07/2015 B BAC 01/07/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE