Specs

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 75SA-073
SWITCH ASSEMBLY
Frequency Range
DC-1000 MHz
Configuration
1P50T normally open self-terminating electromechanical RF switch
Enclosure Type
19 inch rack mount @ 4RU high
Startup/Default States
(configurable)
RF Switch off at startup (see SWITCH command)
DHCP enabled (see NET command)
4 Ethernet users (see NET command)
Prompts off (see PROMPT command)
Impedance
75 Ohms nominal
VSWR
1.25:1 typical
1.40:1 maximum
Insertion Loss
1.5 dB typical
2.0 dB maximum
Isolation
90 dB typical
80 dB minimum
RF Input Power
+27 dBm maximum
Switching Speed
10 milliseconds
(after command is received and processed)
(3 milliseconds typical processing time)
Manual Control
20-Button Keypad and LCD display
(IP Address configurable via keypad)
(Net mask configurable via keypad)
(Gateway configurable via keypad)
(Baud rate configurable via keypad)
Remote Control
Ethernet (DHCP, TCP/IP, 10/100, up to 12 users)
RS-232 (up to 115200 Baud)
Remote Commands
RF Switch Control Commands:
Switch, Set Switch, Read Switch
System Commands:
Help, Identification, Store, Recall, Pause, Net,
Serial, Close, Disconnect, MOTD, Date, Message,
Restrict, IDENT, Name, Show Users, Reboot, Uptime,
Prompt
--CONTINUED-Page 1 of 2
JFW FORM E-7-F REV F
JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 75SA-073
SWITCH ASSEMBLY
AC Supply
100-240 VAC @ 47-63 Hz
2 Amp 5x20mm "Slo-Blo" AC fuse
Littelfuse #215-002, JFW #025-021
RF Connector
F female
Operating Temperature Range
0º to +50º C
Physical Size
See outline drawing 092-7434
ECR/ECN #
DATE
REV
08/14/2012
Page 2 of 2
APPR / DATE
ECR/ECN #
BAC 08/14/2012
21879
09/04/2012
A
BAC 09/04/2012
24239
12/09/2014
B
TRS 12/09/2014
JFW FORM E-7-F REV F
DATE
REV
APPR / DATE